Features of the Sintering of Fe–Cu–Sn–Ni and Cu–Ti–Sn–Ni Powders during Hot Pressing
Source abstract
Abstract
The efficiency and durability of a diamond tool fabricated using powder metallurgy methods depend on several factors. These are the quality of diamond materials, composition of a bond and its physicomechanical and physicochemical properties, as well as the nature and structure of the initial metal powders for sintering of a diamond-composite material, i.e., a functional element of a diamond tool. This paper examines the dispersion influence of the initial metal powders on the hot-pressing sintering process in two metal systems, Fe–Cu–Sn–Ni and Cu–Ti–Sn–Ni. In the first case, the initial charge was a mixture of independent Fe, Cu, Sn, and Ni metal powders. In the second case, we used the powder of the Cu–Ti–Sn–Ni alloy, previously melted and dispersed in ball mills. The effect of dispersion, size distribution, morphology, average mass diameter on the density, and hardness of sintered metal samples was then studied. It was revealed that the sintering capacity and features of the sinters are directly dependent on the dispersion of the initial powders for the Fe–Cu–Sn–Ni system. In contrast, the initial charge is a classical mixture of individual metallic powders. When using powders of Cu–Ti–Sn–Ni alloys, the revealed dependence of the dispersion of the initial powder in the alloy on sinterability and properties of the sinters is no longer observed. During the experiment, reverse phenomena were established. Thus, the best results were achieved when using a coarse grain size of the alloy powder. In this work, we showed the possibility of producing pre-melted alloy powder of a planned composition based on copper (Cu ≥ 77%) Cu–Ti–Sn–Ni with a Ti content >10% by mechanical activation for the further successful implementation as a binder of diamond tools.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. C. Artini, M.L. Muolo, and A. Passerone, “Diamond-metal interfaces in cutting tools: A review,” J. Materials Science, 47, 3252–3264 (2012).10.1007/s10853-011-6164-6 ↗
2. J. Konstanty Production parameters, and materials selection of powder metallurgy diamond tools. J. Powder Metallurgy, 49, 2 99–306 (2006).10.1179/174329006X120456 ↗
3. J. Borowiecka-Jamrozek and J. Lachowski, “The effect of the properties of the metal matrix on the retention of a diamond particle,” J. Metallurgija, 56, 83–86 (2017).
4. S.W. Webb, “Diamond retention in sintered cobalt bonds for stone cutting and drilling,” J. Diamond & Related Materials, No. 8, 2043–2052 (1999).10.1016/S0925-9635(99)00167-3 ↗
5. W. Tillman, M. Ferreira, A. Steffen, K. Ruster, J. Moller, S. Bieder, M. Paulus, and M. Tolan, “Carbon reactivity of binder metals in diamond-metal composites–characterization by scanning electron microscopy and x-ray diffraction,” J. Diamond & Related Materials, 38, 118–123 (2013).10.1016/j.diamond.2013.07.002 ↗
6. S.C. Cabral, L.J. De Oliveira, and M. Filgueira, “Influence of a TiC Coating on the Wear Resistance of Fe–Diamonds Composites,” Material Science Forum 2012, 727–728, 275–280, https://doi.org/10.4028/www.scientific.net/MSF,727-728.275.10.4028/www.scientific.net/MSF,727-728.275 ↗
7. Z.Q. Chu, X.Y. Guo, D.H. Liu, Y.X. Tan, D. Li, and Q.H. Tian, “Application of pre-alloyed powders for diamond tools by ultrahigh-pressure water atomization,” Transactions of Nonferrous Metals Society China, 26, 2665–2671 (2016).10.1016/S1003-6326(16)64393-5 ↗
8. H. Dai, L. Wang, J. Zhang, Y. Liu, Y. Wang, L. Wang, and X. Wan, “Iron-based partially pre-alloyed powders as matrix materials for diamond tools,” J. Powder Metallurgy, 58, 83–86 (2015).10.1179/0032589915Z.000000000220 ↗
9. D.A. Sidorenko, E.A. Levashov, P.A. Loginov, N.V. Shvyndina, E.A. Skryleva, and I.E. Uskova, “On the mechanism of the spontaneous cladding of diamond with tungsten carbide in the process of sintering a tool with a nanomodified Cu–Fe–Co–Ni metal binder,” Izvestia Vuzov. Tsvetnaya Metallurgia, No. 5, 53–63 (2015).10.17073/0021-3438-2015-5-53-63 ↗
10. D. Rommel, F. Scherm, C. Kuttner, and U. Glatzel, “Laser cladding of diamond tools: Interfacial reactions of diamond and molten metal,” J. Surface and Coatings Technology, 291, 62–69 (2016).10.1016/j.surfcoat.2016.02.014 ↗
11. J. Konstanty and A. Romunski, “New nanocrystalline matrix materials for sintered diamond tools,” J. Materials Science and Applications, No. 3, 779–783 (2012).10.4236/msa.2012.311113 ↗
12. V.A. Mechnik, “Production of Diamond–(Fe–Cu–Ni–Sn) composites with high wear resistance,” J. Powder Metallurgy and Metal Ceramics, 52, No. 9. P. 577–587 (2014).10.1007/s11106-014-9563-9 ↗
13. A.A. Zaitsev, D.A. Sidorenko, E.A. Levashov, V.V. Kurbatkina, S.I. Rupasov, V.A. Andreyev, and P.V. Sevast’yanov, “Development and application of dispersion–hardened binder based on Cu–Ni–Fe–Sn alloy for cutting tools from superhard materials,” J. Superhard Materials, No. 2, 75–88 (2012).10.3103/S1063457612040090 ↗