journal article·2014-07

Powder Iron–Glass Material: Mechanism of Wear in Vacuum

A. M. Petrova

Powder Metallurgy and Metal Ceramics· Volume 53· Issue 3-4
Publisher page

Abstract

The wear mechanism of powder iron–glass material is analyzed. The behavior of PS5GSh–PS5GSh and of PS5GSh–hardened steel 45 during friction in vacuum is studied. It is established that the glass inclusions and “white layer” formed on the friction surface influence the wear-resistance of the iron-glass material. It is noted that increased hardness leads the glass inclusions to form a near-surface framework, resisting the plastic deformation on the surface and inside the material. It is shown that the white inclusions have low friction adhesion and thus prevent seizure with steel. The “white layer” adheres strongly to the material. It acts as a solid lubricant and, along with the glass inclusions, increases the wear resistance. Extreme gross wear is accompanied by active growth and failure of the “white layer” as scales on dislocation slip planes located at an angle to the friction surface. The wear mechanism of the powder iron–glass materials under simultaneous contact of steel and glass is studied.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Material Properties and Applications · Polymer Science and Applications · Materials Engineering and Processing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (8)

Show source-provided references
1. I. D. Radomysel’skii, “Structure and properties of constructional sintered materials,” Powder Metal. Met. Ceram., 13, No. 4, 286–292 (1974).10.1007/BF00796802 ↗
2. I. D. Radomysel’skii, G. G. Serdyuk, and N. I. Shcherban’, Constructional Powder Materials [in Russian], Technika, Kiev (1985), p. 134.
3. V. N. Klimenko, A. M. Petrova, U. A. Popchenko, et al., “Studying the wear resistance of PS5GSh in dry friction,” in: Structural Powder Materials [in Russian], Porosh. Konstr. Mater., Kiev (1992), pp. 78–84.
4. A. M. Petrova, “Comparative study of the wear resistance of an iron–glass material in dry and thin-film lubricated friction conditions,” in: Advanced Problems in Material Physics [in Russian], Inst. Probl. Materialoved. NAN Ukrainy, Kiev (2009), pp. 50–55.
5. B. I. Kostetskii, M. E. Natanson, and L. I. Bershadskii, Mechanical and Chemical Processes in Thin-Film Lubricated Friction [in Russian], Nauka, Moscow (1972), pp. 101–104.
6. I. M. Lyubarskii, Improving the Wear Resistance of Heavy-Loaded Gear Wheels [in Russian], Mashinostroenie, Moscow (1965), p. 230.
7. P. Z. Vlasyuk, E. S. Lugovskaya, and I. D. Radomysel’skii, “Impregnation of glass particles with metal in the sintering of metal-glass materials,” Powder Metal. Met. Ceram., 10, No. 5, 380–384 (1971).10.1007/BF00793855 ↗
8. P. Z. Vlasyuk and I. D. Radomysel’skii, “Effect of sintering temperature on the phase composition of metal-glass materials,” Powder Metal. Met. Ceram., 11, No. 5, 372–377 (1972).10.1007/BF00797740 ↗