journal article·2019-03

Effect of Sensitization on Electroless Nickel Plating of MoS2 Nanoparticles

P. Eashwar Siddharth, P. Aravind, K. Dhanapal, N. Arunkumar, A. Stephen

Powder Metallurgy and Metal Ceramics· Volume 57· Issue 11-12
Publisher page

Abstract

In this work, the surface of MoS2 particles has been coated with Ni using the electroless plating method as it is relatively efficient and cost effective. Two samples were synthesised, one of them was sensitized using Sn (ultrasonically dispersed for 30 min in a 24-hour aged bath comprising 0.1 M SnCl2 and 0.1 M HCl) and the other was not sensitized. The effect of the sensitization process on nickel coating over MoS2 particle surface was studied. XRD pattern of as-deposited surface of the sensitized and non-sensitized samples shows the absence of Ni phase while the annealed samples confirm the presence of Ni in fcc structural phase along with MoS2 phase. The surface morphology of all samples is observed using FESEM and it is observed that the treatment with Sn forms a uniform coating over MoS2 particles whereas the non-sensitized sample shows an irregular coating of Ni over MoS2 particles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Advanced materials and composites · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. N. Chawla, and Y.L. Shen, “Mechanical behavior of particle reinforced metal matrix composites,” Adv. Eng. Mater., 3, No. 6, 357–370 (2001).10.1002/1527-2648(200106)3:6<357::AID-ADEM357>3.0.CO;2-I ↗
2. S. Suresha and B.K. Sridhara, “Effect of addition of graphite particulates on the wear behaviour in aluminium–silicon carbide–graphite composites,” Mater. Design, 31, No. 4, 1804–1812 (2010).10.1016/j.matdes.2009.11.015 ↗
3. N.G.S. Kumar, V.M. Ravindranath, and G.S.S. Shankar, “Mechanical and wear behaviour of aluminium metal matrix hybrid composites,” Procedia Mater. Sci., 5, 908–917 (2014).10.1016/j.mspro.2014.07.378 ↗
4. F.J. Clauss, Solid Lubricants and Self-Lubricating Solids, Academic Press, New York (1972), p. 274.
5. I. Estrada-Guel, C. Carreño-Gallardo, J.L. Cardoso-Cortés, E. Rocha-Rangel, J.M. Herrera-Ramírez, and R. Martínez-Sánchez, “Effect of metallic addition on mechanical properties in an aluminum–graphite composite synthesized by means of mechanical milling,” J. Alloy. Compd., 495, No. 2, 403–407 (2010).10.1016/j.jallcom.2009.10.256 ↗
6. H. Chen, and A.T. Alpas, “Wear of aluminium matrix composites reinforced with nickel-coated carbon fibres,” Wear, 192, Nos. 1–2, 186–198 (1996).10.1016/0043-1648(95)06795-7 ↗
7. M. Palaniappa, G.V. Babu, and K. Balasubramanian, “Electroless nickel–phosphorus plating on graphite powder,” Mater. Sci. Eng.: A, 471, Nos. 1–2, 165–168 (2007).10.1016/j.msea.2007.03.004 ↗
8. X. Xu, Z.D. Cui, S.L. Zhu, Y.Q. Liang, and X.J. Yang, “Preparation of nickel-coated graphite by electroless plating under mechanical or ultrasonic agitation,” Surf. Coatings Tech., 240, 425–431 (2014).10.1016/j.surfcoat.2013.12.070 ↗
9. S. Zhang, K. Han, and L. Cheng, "The effect of SiC particles added in electroless Ni–P plating solution on the properties of composite coatings,” Surf. Coatings Tech., 202, No. 12, 2807–2812 (2008).10.1016/j.surfcoat.2007.10.015 ↗
10. K. Rajkumar and S. Aravindan, “Tribological studies on microwave sintered copper–carbon nanotube composites,” Wear, 270, No. 9, 613–621 (2011).10.1016/j.wear.2011.01.017 ↗
11. J.T. Jiang, L. Zhen, C.Y. Xu, and X.L. Wu, "Microstructure and magnetic properties of SiC/Co composite particles prepared by electroless plating", Surf. Coatings Tech., 201, No. 6, 3139–3146 (2006).10.1016/j.surfcoat.2006.06.036 ↗
12. S.L. Zhu, L. Tang, Z.D. Cui, Q. Wei, and X.J. Yang, ”Preparation of copper-coated β-SiC nanoparticles by electroless plating,” Surf. Coatings Tech., 205, Nos. 8–9, 2985–2988 (2011).10.1016/j.surfcoat.2010.11.010 ↗
13. L. Luo, Y. Wu, J. Li, and Y. Zheng, “Preparation of nickel-coated tungsten carbide powders by room temperature ultrasonic-assisted electroless plating,” Surf. Coatings Tech., 206, No. 6, 1091-1095 (2011).10.1016/j.surfcoat.2011.07.078 ↗
14. D.G. Flom, A.J. Haltner, and C.A. Gaulin, “Friction and cleavage of lamellar solids in ultrahigh vacuum,” ASLE Trans., 8, No. 2, 133–145 (1965).10.1080/05698196508972087 ↗
15. K. Dhanapal, T.A. Revathy, M.A. Raj, V. Narayanan, and A. Stephen, “Magnetic anisotropy studies on pulsed electrodeposited Ni/Ag/Ni trilayer,” Appl. Surf. Sci., 313, 698–703 (2014).10.1016/j.apsusc.2014.06.058 ↗