journal article·2018-11

Zirconia–Titanium Interface in Ceramic Based Composite

P. Lada, A. Miazga, P. Bazarnik, K. Konopka, M. Szafran

Powder Metallurgy and Metal Ceramics· Volume 57· Issue 7-8
Publisher page

Abstract

One of the important aspects in the preparation of composite materials is the possibility of reaction between used components. In the case of composite of ZrO2–Ti system, it could be the reaction between zirconia and titanium particles during sintering process. In this work ZrO2/Ti interface at 3Y-ZrO2–10 vol.% Ti composites was analyzed. The composites were prepared by slip casting method. Sintering process was carried out at 1450°C in the inert atmosphere of argon. The sinters were prepared for SEM and STEM microscope observations by polishing and ion milling. The chemical analysis was conducted by EDS. The bonding between Ti particle and ZrO2 matrix was continuous. XRD analysis, microscopic observations and chemical analysis showed the limited diffusion between components. The creation of new phases at ZrO2/Ti interface was not revealed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. A.S. Al-Radha, D. Dymock, C. Younes, and D. O’Sullivan, “Surface properties of titanium and zirconia dental implant materials and their effect on bacterial adhesion,” Journal of dentistry, 40, No. 2, 146–153 (2012).10.1016/j.jdent.2011.12.006 ↗
2. P. Miranzo, and M.I. Osendi, “Thermal conductivity of a ZrO2–Ni functionally graded coatings,” Scr. Mater., 58, No. 11, 973–976 (2008).10.1016/j.scriptamat.2008.01.027 ↗
3. T. Wager, R. Kirchheim, and M. Ruhle, “Chemical reaction at metal/ceramic interfaces during diffusion bonding,” Acta Metall. Mater., 43, No. 3, 1053–1063 (1995).10.1016/0956-7151(94)00297-U ↗
4. M.C. Munoz, J.I. Beltran, S. Gallego, and J.I. Cerdá, “Adhesion at metal–ZrO2 interfaces,” Surf. Sci. Reports, 61, No. 6, 303–344 (2006).10.1016/j.surfrep.2006.03.002 ↗
5. T. Fujii, K. Tohgo, H. Araki, K. Wakazono, M. Ishikura, and Y. Shimamuraand, “Effect of material composition on mechanical properties of ceramic-metal composite materials,” Key Eng. Mater., 462–463, 100–105 (2011).10.4028/www.scientific.net/KEM.462-463.100 ↗
6. B.C. Weber, H.J. Garrett, F.A. Mauer, and M.A. Schwartz, “Observations on the stabilization of zirconia,” J. Am. Ceram. Soc., 39, No. 6, 197–206 (1956).10.1111/j.1151-2916.1956.tb15645.x ↗
7. R. Ruh, “Reaction of zirconia and titanium at elevated temperatures,” J. Am. Ceram. Soc., 46, No. 7, 301–307 (1963).10.1111/j.1151-2916.1963.tb11735.x ↗
8. R. Ruh, N.M. Tallan, and H.A. Lipsitt, “Effect of metal additions on the microstructure of zirconia,” J. Am. Ceram. Soc., 47, No. 12, 632–635 (1964).10.1111/j.1151-2916.1964.tb13123.x ↗
9. K.L. Lin, and C.C. Lin, “Ti2ZrO phases formed in the titanium and zirconia interface after reaction at 1550°C,” J. Am. Ceram. Soc., 88, No. 5, 1268-1272 (2005).10.1111/j.1551-2916.2005.00218.x ↗
10. K.L. Lin, and C.C. Lin, “Zirconia-related phases in the zirconia/titanium diffusion couple after annealing at 1100–1550°C”, J. Am. Ceram. Soc., 88, No. 10, 2928–2934 (2005).
11. K.L. Lin, and C.C. Lin, “Effected of annealing temperature on microstructural development at the interface between zirconia and titanium,” J. Am. Ceram. Soc., 90, No. 3, 893–899 (2007).10.1111/j.1551-2916.2006.01352.x ↗
12. K.L. Lin, and C.C. Lin, “Transmission electron microscope investigation of the interface between titanium and zirconia,” J. Am. Ceram. Soc., 82, No. 11, 3179–3185 (1999).10.1111/j.1151-2916.1999.tb02221.x ↗
13. A.P. Tomsia, H. Ishibashi, E. Saiz, and J.S. Moya, “Powder processing of Mullite/Mo functionally graded materials,” J. Eur. Ceram. Soc., 18, No. 9, 1365–1371 (1998).10.1016/S0955-2219(98)00066-1 ↗
14. J.F. Bartolome, M. Diaz, J. Requena, J.S. Moya, and A.P. Tomsia, “Mullite/Molybdenum ceramic-metal composites”, Acta Mater., 47, No. 14, 3891-3899 (1999).10.1016/S1359-6454(99)00220-7 ↗
15. D. Doni Jayaseelan, D. Amutha Rani, T. Nishikawa, H. Awaji, and T. Ohjia, “Sintering and microstructure of mullite-Mo composites,” J. Eur. Ceram. Soc., 22, 1113–1117 (2002).10.1016/S0955-2219(01)00421-6 ↗
16. J.F. Bartolome, M. Diaz, J.S. Moya, E. Saiz, and A.P. Tomsia, “Mullite/Mo interfaces formed by intrusion bonding”, J. Eur. Ceram. Soc., 24, 785–790 (2004).10.1016/S0955-2219(03)00339-X ↗
17. L.D. Teng, F.M. Wang, and W.C. Li, “Thermodynamics and microstructure of Ti–ZrO2 metal–ceramic functionally graded materials,” Mater. Sci. Eng. A, 293, Nos. 1–2, 130–136 (2000).10.1016/S0921-5093(00)01045-5 ↗
18. T. Lidonga, and L. Wenchaob, “Residual stress analysis of Ti–ZrO2 thermal barrier graded materials,” Mater. Design, 23, 627–632 (2002).10.1016/S0261-3069(02)00049-3 ↗
19. P. Lada, P. Falkowski, A. Miazga, K. Konopka and M. Szafran, “Fabrication of ZrO2–Ti composites by slip casting method,” Arch. Metall. Mater., 61, No. 2B, 1095–1100 (2016).10.1515/amm-2016-0184 ↗
20. M. Chmielewski, S. Nosewicz, D. Jakubowska, M. Lewandowska, and P. Bazarnik, “The influence of sintering time on the microstructural properties of chromium-rhenium matrix composites,” Int. J.Refractory Metals and Hard Materials, 59, 78–86 (2016).10.1016/j.ijrmhm.2016.05.017 ↗
21. J.A. Munoz-Tabares, J. Reyes-Gasga, E. Jiménez-Piqué, and M. Anglada, “Microstructural changes in ground 3Y-TZP and their effect on mechanical properties,” Acta Mater., 59 No. 17, 6670–6683 (2011).10.1016/j.actamat.2011.07.024 ↗
22. P. Lada, A. Miazga, P. Bazarnik and K. Konopka, “Microstructure Characterization of Composite from ZrO2–Ti System,” Arch. Metall. Mater., 62, No. 4, 2045–2049 (2017).10.1515/amm-2017-0303 ↗