journal article·2017-01

Shock-Wave Sintering of the 70 vol.% Kh13M2–30 vol.% Cr3C2 Carbonized Steel in a Wide Temperature Range

A. I. Tolochin, A. V. Laptev, R. V. Yakovenko, V. A. Maslyuk

Powder Metallurgy and Metal Ceramics· Volume 55· Issue 9-10
Publisher page

Abstract

The compaction of the 70 vol.% Kh13M2–30 vol.% Cr3C2 carbonized steel is carried out by the shock-wave sintering under 1200 MPa in the 950–1200°C temperature range and the free sintering is performed at 1250°C in vacuum (0.13 Pa). The effect of the compacting temperature and annealing at 1150°C on the structure and physical and mechanical properties of the composite is studied. It is shown that an active interaction between carbide phase and steel matrix occurs in the structure of the material during heating. As a result, the amount of carbide component in the composite increases by 10 vol.% and by 30 vol.% during annealing, compared to the starting carbonized steel. High strength and plasticity properties of the composite are obtained at a shockwave sintering temperature of ≥1100°C. The carbonized steel possesses the following properties: bending strength 1165 MPa, compression strength 2665 MPa, compressive plastic strain 8.2%, fracture toughness 20.4 MPa · m1/2, and the Rockwell hardness 78 HRA.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Powder Metallurgy Techniques and Materials · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (7)

Show source-provided references
1. V. G. Kayuk, V. A. Maslyuk, and A. D. Kostenko, “Tribotechnical properties of hard alloys based on chromium carbide,” Powder Metall. Metal. Ceram., 42, No. 5, 257–261 (2003).
2. R. Z. Vlasyuk, A. N. Gripachevskii, and I. D. Radomysel’skii, “Changes in the chemical and phase composition of a Cr3C2 particle in contact with an iron matrix during sintering,” Powder Metall. Metal. Ceram., 23, No. 8, 597–602 (1984).10.1007/BF00796623 ↗
3. R. V. Yakovenko, V. A. Maslyuk, A. A. Mamonova, et al., “Interaction of chromium carbide with a Kh13M2 steel matrix,” Powder Metall. Metal. Ceram., 52, No. 11, 644–650 (2013).
4. R. V. Yakovenko, V. A. Maslyuk, A. N. Gripachevskii, and V. B. Deimontovich ”Dissolution of chromium carbide Cr3C2 in Kh17N2 steel during sintering,” Powder Metall. Metal. Ceram., 50, Nos. 3–4, 75–83 (2011).10.1007/s11106-011-9316-y ↗
5. A. I. Tolochin, “Obtaining metallic matrix composites with ultrafine structure by pulsed hot pressing,” Perspect. Materials, No. 9, 266–272 (2010).
6. A. V. Laptev, A. I. Tolochin, and I. Yu. Okun’, “Effect of temperature and compacting pressure on the properties of WC–25 wt.% Co hard alloy,” Fiz. Tekh. Vys. Davl., 23, No. 1, 68–81 (2013).
7. A. I. Khomenko and E. V. Khomenko, “Microstructural analysis software package,” Powder Metall. Metal. Ceram., 46, No. 1, 100–104 (2007).10.1007/s11106-007-0016-6 ↗