journal article·2013-09

The Constitution of Alloys and Phase Diagram of the Ternary Al–Cr–Pt System at 50–100 at.% Pt. I. Solidus Surface and Isothermal Section in the Al–Cr–Pt System at 1350 C in the Range 50–100 at.% Pt

K. E. Kornienko, V. G. Khoruzha, K. A. Meleshevich, M. V. Karpets

Powder Metallurgy and Metal Ceramics· Volume 52· Issue 5-6
Publisher page

Abstract

The results of high-temperature diffraction, metallography, X-ray diffraction, electron microprobe analysis, and differential thermal analysis are used to specify the constitution of the Al–Pt system in the near-equiatomic range. The solidus surface is constructed for the first time on the composition triangle, and the constitution of the isothermal section at 1350°C in the range 50–100 at.% Pt of the Al–Cr–Pt ternary system is specified. The solidus surface consists of six single-phase surfaces corresponding to the ternary τ 1 phase (unknown structure), solid solutions based on platinum, and four binary phases existing in the Al–Pt system; nine ruled surfaces bounding two-phase volumes; and four isothermal planes forming invariant four-phase equilibria with participation of a liquid phase. When temperature decreases from subsolidus to 1350°C, stability of the phase based on the compound (low-temperature modification) increases substantially. This phase takes part in equilibria with other intermediate phases and with the Pt-based solid solution.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Metallurgical and Alloy Processes · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. P. J. Hill, L. A. Cornish, P. Ellis, et al., “The effects of Ti and Cr additions on the phase equilibria and properties of (Pt)/Pt3Al Alloys,” J. Alloys Compd., 322, 166–175 (2001).10.1016/S0925-8388(01)01018-0 ↗
2. R. Suess, Investigation of the Pt–Al–Cr System as Part of the Development of the Pt–Al–Cr–Ru Thermodynamic Database, A Thesis…in Fulfillment of the Requirements for the Degree of Doctor of Philosophy, Johannesburg (2007), p. 384.
3. R. Suess, L. A. Cornish, and M. J. Witcomb, “Investigation of as-cast alloys in the Pt–Al–Cr system,” J. Alloys Compd., 490, 124–144 (2010).10.1016/j.jallcom.2009.10.032 ↗
4. L. A. Cornish, R. Suess, A. Douglas, et al., “The Platinum development initiative: Platinum-based alloys for high temperature and special applications: part I,” Platinum Met. Rev., 53, No. 1, 2–10 (2009).10.1595/147106709X393299 ↗
5. A. Douglas, P. J. Hill, T. Murakumo, et al., “The Platinum development initiative: Platinum-based alloys for high temperature and special applications: part II,” Platinum Met. Rev., 53, No. 2, 69–77 (2009).10.1595/147106709X434040 ↗
6. L. A. Cornish, R. Suess, L. H. Chown, et al., “The Platinum development initiative: Platinum-based alloys for high temperature and special applications: part III,” Platinum Met. Rev., 53, No. 3, 155–163 (2009).10.1595/147106709X464371 ↗
7. P. J. Hill, N. Adams, T. Biggs, et al., “Platinum alloys based on Pt–Pt3Al for ultra-high temperature use,” Mater. Sci. Eng. A, 329–331, 295–304 (2002).10.1016/S0921-5093(01)01577-5 ↗
8. G. H. Potgieter, N. B. Maledi, M. Sephton, et al., “Platinum-based alloys for high temperature and special applications: part IV,” Platinum Met. Rev., 54, No. 2, 112–119 (2010).10.1595/147106710X492378 ↗
9. P. J. Hill, G. B. Fairbank, and L. A. Cornish, “New developments in high-temperature Platinum alloys,” J. Met., 53, No. 10, 19–20 (2001).
10. R. Suess, D. Freund, R. Voelkl, et al., “The creep behavior of Platinum-based γ / γ′ analogues of Nickel-based superalloys at 1300°C,” Mater. Sci. Eng. A, 338, 133–141 (2002).10.1016/S0921-5093(02)00068-0 ↗
11. R. Voelkl, M. Wenderoth, J. Preussner, et al., “Development of a precipitation-strengthened Pt-Base superalloy,” Mater. Sci. Eng. A, 510–511, 328–331 (2009).10.1016/j.msea.2008.12.034 ↗
12. T. B. Massalski (ed.), Binary Alloy Phase Diagrams, 3 Vols., 2nd ed., ASM International, Ohio (1990), p. 3589.
13. JCPDS-ICDD, Powder Diffraction File, Joint Committee on Powder Diffraction Standards, International Center for Diffraction Data, Pennsylvania, USA (2001).
14. P. Villars and L. D. Calvert, Pearson’s Handbook of Crystallographic Data for Intermetallic Phases, in 3 Vols., ASM, Metals Park, Ohio, USA (1985).
15. J. Preussner, S. Prins, R. Voelkl, et al., “Determination of phases in the system Chromium–Platinum (Cr–Pt) and thermodynamic calculations,” Mater. Sci. Eng. A, 510–511, 322–327 (2009).10.1016/j.msea.2008.10.059 ↗
16. R. M. Waterstrat, “The chromium–platinum constitution diagram,” Met. Trans., 4, 1585–1592 (1973).10.1007/BF02668012 ↗
17. D. E. Kim, V. R. Manga, S. N. Prins, and Z.-K. Liu, “First-principles calculations and thermodynamic modeling of the Al–Pt binary system,” Calphad, 35, 20–29 (2011).10.1016/j.calphad.2010.10.008 ↗
18. S. Bhan and H. Kudielka, “Ordered bcc-phases at high temperatures in alloys of transition metals and B-subgroup elements,” Z. Metallkd., 69, No. 5, 333–336 (1978).
19. T. Chattopadhyay and K. Schubert, “Kristallstruktur von Pt3Ga (r) und Einigen Phasen der Mischung Pt–Al,” J. Less-Common Met., 41, 19–32 (1975).10.1016/0022-5088(75)90090-9 ↗
20. A. J. McAlister and D. J. Kahan, “Al–Pt (aluminum–platinum),” Bull. All. Phase Diagrams, 7, No. 1, 47–51 (1986).10.1007/BF02874982 ↗
21. R. Huch and W. Klemm, “Das System Platin–Aluminium,” Z. Anorg. Allg. Chem., 329, 123–135 (1964).10.1002/zaac.19643290116 ↗
22. T. Chattopadhyay and K. Schubert, “Kristallstruktur von Pt2Al.r,” J. Less-Common Met., 45, 79–83 (1976).10.1016/0022-5088(76)90198-3 ↗
23. M. Ellner, “Zusammenhang zwischen Strukturellen und Thermodynamischen Eigenschaften bei Phasen der Cu-Familie in den T10–B3 Systemen,” J. Less-Common Met., 60, P15–P39 (1975).10.1016/0022-5088(78)90187-X ↗
24. Y. Oya, Y. Mishima, and T. Suzuki, “The Pt–Al and Pt–Ga phase diagram with emphasis on the polymorphism of Pt3Al and Pt3Ga,” Z. Metallkd., 78, No. 7, 485–490 (1987).
25. Yu. A. Kocherzhinskii, E. A. Shishkin, and V. I. Vasilenko, “Apparatus for differential thermal analysis with a thermocouple sensor to 2200°C,” in: Phase Diagrams of Metallic Systems [in Russian], Nauka, Moscow (1971), pp. 245–249.