journal article·2009-11

Copper tungstate produced from tungsten-containing waste as addition to antifriction material

A. G. Kostornov, V. V. Pasichnyi, O. I. Fushchich, V. T. Varchenko, V. S. Korchemnaya

Powder Metallurgy and Metal Ceramics· Volume 48· Issue 11-12
Publisher page

Abstract

The paper examines the use of tungsten-containing waste to develop a copper-based microheterogeneous antifriction material. The effect of copper tungstate CuWO 4 on the tribotechnical properties of antifriction material Cu-Sn-CuWO 4 -MoS 2 is analyzed at a pressure between 1.25 and 17.5 MPa and sliding speeds of 0.5 and 1.0 m/sec with liquid lubrication. It is established that the composite antifriction material Cu-Sn-CuWO 4 -MoS 2 can perform up to 17.5 MPa at a sliding speed of 0.5 m/sec and up to 12.5 MPa at 1 m/sec. The antifriction composite Cu-9 Sn-7.5 CuWO 4 -5 MoS 2 has the optimal friction coefficient (0.135-0.01) and wear (6.0-3.1 μm/km) between 1.25-12.5 MPa under the above conditions and can perform up to 150°C. When Cu-Sn-CuWO 4 -MoS 2 is sintered in hydrogen, CuWO 4 decomposes and reduces to pure metal, and tungsten particles reinforce the matrix. The antifriction material Cu-Sn-CuWO 4 -MoS 2 is microheterogeneous. The load-bearing component (matrix) represents an α-solid solution of tin in copper. Fine tungsten particles that are uniformly distributed in the matrix reinforce it and improve the bearing capacity of the material. Inclusions of molybdenum disulphide contribute to the formation of secondary structures on the friction surface and decrease the friction coefficient.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Material Properties and Applications · Extraction and Separation Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. V. V. Pasichnyi, V. S. Korchemnaya, S. A. Ostapenko, and M. S. Pasichnaya, “On the production of nanoand microsized WO3 powders in thermal treatment of tungsten-containing waste in a solar furnace,” in: Nanosystems, Nanomaterials, Nanotechnologies [in Russian] (Collected Scientific Papers), Issue 4, Inst. Metallofiz. NAN Ukrainy (2006), pp. 871–876.
2. V. V. Pasichnyi, V. S. Korchemnaya, S. A. Ostapenko, and M. S. Pasichnaya, “Technique for the thermal treatment of tungsten-containing industrial waste using focused solar energy,” in: Proc. 15th Int. Sci.-Tekh. Conf. Ecological and Industrial Safety. Water and Air Protection. Waste Disposal [in Russian], UkrVODGEO, Kharkov (2007), Vol. 2, p. 278.
3. V. V. Pasichnyi, “Examination of the physical and technical properties of materials and coatings using concentrated solar energy,” Powder Metall. Met. Ceram., 34, No. 7–8, 475–483 (1996).10.1007/BF00559442 ↗
4. A. N. Zelikman and L. S. Nikitina, Tungsten [in Russian], Metallurgiya, Moscow (1978), p. 272.
5. A. N. Zelikman, Molybdenum [in Russian], Metallurgiya, Moscow (1970), p. 440.
6. I. M. Fedorchenko and L. I. Pugina, Sintered Composite Antifriction Materials [in Russian], Naukova Dumka, Kiev (1980), p. 404.
7. E. E. Bisson, R. L. Johnson, and M. A. Swikert, Friction, “Wear and surface damage of metals as affected by solid surface films: A review of N.A.C.A. research,” in: Proc. Conf. Lubrication and Wear, The Institute of Mechanical Engineers, London (1957).
8. P. J. MacDonald, Sintered Rubbing Contact Material and Method for Producing Same, Patent 3205556 USA, Published 14 September (1965).
9. V. V. Skorokhod, V. V. Panichkina, Yu. M. Solonin, and I. V. Uvarova, Particulate Powders of Refractory Metals [in Russian], Naukova Dumka, Kiev (1978), p. 172.
10. I. V. Kragel’skii and V. V. Alisina (eds.), Friction, Wear, and Lubrication [in Russian], Mashinostroenie, Moscow (1978), Vol. 1, p. 400.