journal article·2020-09

Composite Antifriction Material Based on Wastes of Aluminum Alloy for Items of Post-Printing Equipment

T. A. Roik, O. A. Gavrysh, Iu. Iu. Vitsiuk

Powder Metallurgy and Metal Ceramics· Volume 59· Issue 5-6
Publisher page

Abstract

The article analyzes the features of the structure formation, as well as physical, mechanical, and antifriction properties of the new composite material based on grinding wastes of aluminum alloy AD35 intended for operation with liquid lubricant in the air at loads of up to 4.0 MPa and sliding speeds of up to 2.0 m/sec. The results showed that the application of the developed technology for recycling grinding wastes of aluminum alloy AD35 allowed obtaining a composite antifriction material of a homogeneous structure without liquation phenomena. By its physical and mechanical properties, new composite material does not concede to foreign cast alloy AlSi1MgMn but significantly exceeds it by tribological characteristics in similar operating conditions. Studies have shown that utilizing the grinding wastes of AD35 alloy for the production of new antifriction materials on their basis is an important technological method for the efficient recycling of such a valuable source of high-alloy raw materials. For the new antifriction composite material obtained from high-alloy grinding wastes of aluminum alloy AD35, the rational operating ranges were determined, namely, a sliding speed was up to 2.0 m/sec and a load was up to 4.0 MPa with a counterface from steel 45 (45−48 HRC) at operating in the air under lubrication conditions with PEF-240 synthetic oil. The new composite antifriction material can be used in contact joints of folding machines, die-cutting machines, envelope making equipment, and other post-printing machines as an alternative to currently used foreign cast analogues. It was shown the prospect of using reclaimed industrial grinding wastes of aluminum alloys as a basis for obtaining antifriction composite materials for a different operating mode under conditions, when the structure and properties can be controlled by technological methods choosing the chemical composition of grinding wastes and applying the rational manufacturing technological parameters.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Material Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. P.O. Kirichok, T.A. Roik, A.P. Gavrish, A.V. Shevchuk, and Yu.Yu Vitsyuk, The latest composite materials of friction parts in printing machines [in Ukrainian], NTUU “Kyiv Polytechnic. Inst.,” Kyiv (2015), p. 428.
2. S.B. Venkata Siva, R.R. Dash, R.I. Ganguly, K.L. Sahoo, S.K. Singh, and G. Srinivasrao, “Development of aluminum metal matrix composite using colliary shale – A waste product from Indian coal mines,” in: Proceedings of the International Conference on Powder Metallurgy and Particulates Materials, Nashville, USA (2012), pp. 873–885.
3. Rupa Dasgupta, Aluminium Alloy-Based Metal Matrix Composites: A Potential Material for Wear Resistant Applications, ISRN Metallurgy, Volume 2012, Article ID 594573, p. 14; https://doi.org/10.5402/2012/594573 .10.5402/2012/594573 ↗
4. S.B. Venkata Siva, G. Rao Sreenivasa, and K.L. Sahoo, “Tribological studies of Al-based composite: developed from a waste material,” in: 3rd International Conference on Mechanical, Automotive and Materials Engineering (ICMAME'2013), Singapore, April 29–30 (2013), p. 10.
5. W.S. Miller, L. Zhuang, J. Bottema, A.J. Wittebrood, P. De Smet, A. Haszler, and A. Vieregge, “Recent development in aluminum alloys for the automotive industry,” Mater. Sci. Eng., 280, Issue 1, 37–49, (2011).10.1016/S0921-5093(99)00653-X ↗
6. T.A. Roik, O.A. Gavrysh, and Yu.Yu. Vitsiuk, “The functional properties acquired by antifriction composites produced from silumin grinding waste,” Powder Metall. Met. Ceram., 57, No. 9–10, 526–532 (2018).
7. Lenka Muchová and Eder Peter, End-of-waste Criteria for Aluminum and Aluminum Alloy Scrap: Technical Proposals, Institute for Prospective Technological Studies, Publications Office of the European Union, Luxembourg (2010), p. 66.
8. Seong-Hyeon Hong, Dong-Won Lee, and Byoung-Kee, “Manufacturing of aluminum flake powder from foil scrap by dry ball milling process,” J. Mater. Processing Technol., 100, 105–10e9 (2000).10.1016/S0924-0136(99)00469-0 ↗
9. T.A. Roik, O.A. Gavrysh, Volodimir Oliynik, and Iuliia Vitsiuk, “Analysis of the properties of antifriction composites based on aluminum alloy’s grinding waste,” Eastern-European J. Enterprise Technol., 4, Issue 12 (94), 16−22 (2018).10.15587/1729-4061.2018.140984 ↗
10. T.A. Roik, O.A. Gavrish, and Yu.Yu. Vitsyuk, Composite Wear-Resistant Material, Patent 122870 Ukraine, IPC C22C 21/02 (2018.01), declared on 08.09.2017; No. u201708942; publ. January 25 (2018), Bull. No. 2, p. 3.
11. J.I. Goldstein, D.E. Newbury, J.R. Michael, N.W.M. Ritchie, J.H.J. Scott, and D.C. Joy, Scanning Electron Microscopy and X-ray Microanalysis, Springer (2018), 550 p.10.1007/978-1-4939-6676-9 ↗
12. R.F. Egerton, Physical Principles of Electron Microscopy: An Introduction to TEM, SEM, and AEM, Springer (2005), p. 202.10.1007/b136495 ↗
13. Powder Metal Technologies and Applications, ASM Handbook, Vol. 7, The Materials International Society, New York, USA (1998), p. 1146.
14. A.P. Smirnyagin, Industrial Non-Ferrous Metals and Alloys [in Russian], Metallurgiya, Moscow (1974), p. 246.
15. A.N. Burkhina, E.M. Bilyanskiy, A.O. Chaikovskiy, O.P. Zabrodskiy, V.A. Bedenko, V.N. Prudius, and I.P. Zabrotsky, Aluminum-based alloy, Patent 8251 Ukraine, IPC C22C 21/04., declared on 02.02.1993, No. 93080786, publ. March 29 (1996), Bull. No. 1, p. 4.