Effect of Temperature–Rate Strain Conditions on the Power Variables and Structurization During Hot-Forging of the Sintered Cu–2% Ti Billets
Source abstract
Abstract
The effect of temperature–rate strain conditions in the free settlement of Cu–2% Ti billets sintered in the 100–700°C temperature range with a strain rate of 0.01 and 0.001 sec–1 on the power process variables and structurization are studied. It is observed some increase in the stress at ~400°C, while the general trend is the decrease in stress with increasing strain temperature. This is due to the dynamic strain age-hardening, accompanied with the release of the intermediate metastable and coherent β′-phase Cu4Ti. It is demonstrated that the intensity of compaction during free settlement increases with increasing temperature, strain rate, and the starting porosity of the samples. It is observed that with increasing degree of strain of the billet, it occurs a monotonic decrease in the average grain size of copper and crushing of titanium particles, whose intensity increases with increasing rate and temperature of the strain.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. G. E. Mazharova, G. A. Baglyuk, and A. V. Dovydenkova, Manufacturing Products from Color Metal Powders [in Russian], Tekhnika, Kiev (1989), p. 120.
2. A. V. Dovydenkova and I. D. Radomysel’skii, “Production and properties of constructional parts from copper and copper alloy powders. A review,” Powder Metall. Met. Ceram., 21, No. 3, 196–203 (1982).10.1007/BF00791682 ↗
3. V. A. Surkov, “Study of copper-based powder materials for manufacturing producing antifriction products,” Vestnik Mashinostr., No. 5, 76–77 (2010).
4. GOST 26719–85. Copper-based Powder Antifriction Materials. Implemented in 1985.
5. I. Lahiri and S. Bhargava, “Compaction and sintering response of mechanically alloyed Cu–Cr powder,” Powder Technol., 189, No. 3, 433–438 (2009).10.1016/j.powtec.2008.07.003 ↗
6. D. S. Arensburger and S. M. Letunovich, “Properties of sintered dispersion-hardening Cu–Ti–B alloys,” Powder Metall. Met. Ceram., 27, No. 6, 453–455 (1988).10.1007/BF00798852 ↗
7. J.-H. Ahn, I.-H. Song, and Y.-D. Hahn, “Cu-based cermets prepared by mechanical alloying,” Mat. Transactions, 37, No. 4, 733–737 (1996).10.2320/matertrans1989.37.733 ↗
8. S. Nagarjuna, M. Srinivas, and K. Balasubramanian, “On the variation of mechanical properties with solute content in Cu–Ti alloys,” Mat. Sci. Eng. A, 259, 34–42 (1999).10.1016/S0921-5093(98)00882-X ↗
9. S. Nagarjuna and M. Srinivas, “High temperature tensile behaviour of a Cu–1.5 wt.% Ti alloy,” Mat. Transactions, 335, 89–93 (2002).
10. S. Nagarjuna, K. Balasubramanian, and D. S. Sarma, “Effect of Ti additions on the electrical resistivity of copper,” Mat. Transactions, 225, 118–124 (1997).
11. S. Nagarjuna, K. Balasubramanian, and D. S. Sarma, “Effect of prior cold work on mechanical properties, electrical conductivity and microstructure of aged Cu–Ti alloys,” J. Mat. Sci., 34, 2929–2942 (1999).10.1023/A:1004603906359 ↗
12. W. A. Soffa and D. E. Laughlin, “High-strength age hardening copper–titanium alloys: redivivus,” Prog. Mat. Sci., No. 49, 347–366 (2004).10.1016/S0079-6425(03)00029-X ↗
13. S. Suzuki, K. Hirabayashi, H. Shibata, et al., “Electrical and thermal conductivities in quenched and aged high-purity Cu–Ti alloys,” Scripta Mat., 48, 431–435 (2003).10.1016/S1359-6462(02)00441-4 ↗
14. S. Nagarjuna, M. Srinivas, K. Balasubramanian, and D. S. Sarma, “Effect of alloying content on high cycle fatigue behavior of Cu–Ti alloys,” Int. J. Fatigue, 19, No. 1, 51–57 (1997).10.1016/S0142-1123(96)00041-2 ↗
15. E. N. Sosenushkin, Advanced Processes in Die Forging [in Russian], Mashinostroenye, Moscow (2011), p. 480.
16. O. Gaponova and L. Ryabicheva, “Deforming of the copper-titanium powder materials at elevated temperatures,” in: Proc. Int. Conf. Deformation and fracture in structural PM materials (2008, Stará Lesná, High Tatras, Slovak Republic), Stará Lesná (2008), pp. 202–206.
17. S. A. Saltykov, Stereometrical Metallography [in Russian], Metallurgiya, Moscow (1976), p. 270.
18. M. L. Bernshtein, Structure of Deformed Metals [in Russian], Metallurgiya, Moscow (1976), p. 430.
19. S. S. Gorelik, Recrystallization of Metals and Alloys [in Russian], Metallurgiya, Moscow (1978), p. 568.