Effect of carbon and aluminum contents on the structurization of Al–Ti–C powder master alloy during reaction synthesis
Source abstract
Abstract
The paper presents results of electron microprobe, X-ray diffraction, and differential thermal analyses of master alloys produced by reaction synthesis of Al–Ti–C powder mixtures of various compositions. It is shown that heating of all stating mixtures leads to in situ precipitation of titanium carbide particles and complex titanium–aluminum carbides. Spherical titanium carbide particles are the predominant strengthening phase in samples with high carbon content (10–13%) and disordered elongated acicular grains of complex titanium–aluminum carbides in samples with minimum carbon content (6%) and relatively high aluminum content (40%). It is established that 45 wt.% Al–11 wt.% C–44 wt.% Ti master alloy with practically equal aluminum and titanium contents is characterized by the finest strengthening phase particles after thermal synthesis.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. G. A. Baglyuk and Yu. A. Shishkina, “New composite precipitation-strengthened materials based on aluminum alloys,” Tekhnol. Syst., No. 4, 36–43 (2011).
2. X. C. Tong and A. K. Gosh, “Fabrication of in situ TiC reinforced aluminum matrix composites,” J. Mater. Sci., 36, 4059–4069 (2001).10.1023/A:1017946927566 ↗
3. A. R. Luts, Self-Propagating High-Temperature Synthesis of Modifying Master Alloys and Composite Alloys in Aluminum Melts with Use of Fusing Agents [in Russian], Author’s Abstract of PhD Thesis: 01.04.17, Samara (2006), p. 25.
4. C. Selcuk and A. R. Kennedy, “Al–TiC composite made by the addition of master alloys pellets synthesised from reacted elemental powders,” Mater. Lett., 60, 3364–3366 (2006).10.1016/j.matlet.2006.03.021 ↗
5. X. Zhang, L. Liao, and M. Naiheng, “New in situ synthesis method of magnesium matrix composites reinforced with TiC particulates,” Mater. Res., 9, No. 4, 357–360 (2006).10.1590/S1516-14392006000400003 ↗
6. Hai-Min Ding and Xianga-Fa Liu, “Influence of Si on stability of TiC in Al melts,” Trans. Nonferrous Met. Soc., 2, No. 4, 1465–1472 (2011).10.1016/S1003-6326(11)60882-0 ↗
7. V. Kevorkijan and S. D. Škapin, “Fabrication and characterization of TiAl/Ti3Al-based intermetallic composites (IMCs) reinforced with ceramic particles,” Mater. Sci. Eng., 40, 75–83 (2009).
8. V. N. Antsiferov, V. S. Ustinov, and Yu. G. Olesov, Sintered Titanium Alloys [in Russian], Metallurgiya, Moscow (1984), p. 168.
9. V. I. Ivchenko and T. Ya. Kosolapova, “Abrasive properties of the ternary compounds in the systems Ti–Al–C and Ti–Al–N,” Powder Metall. Met. Ceram., 15, No. 8, 626–628 (1976).10.1007/BF01159451 ↗
10. N. Z. Lyakhov, T. L. Talako, and T. F. Grigor’eva, Effect of Mechanical Activation on Phase and Structure Formation during Self-Propagating High-Temperature Synthesis [in Russian], Parallel, Novosibirsk (2008), p. 168.
11. Y. Zou, Z. Sun, S. Tada, and H. Hashimoto, “Synthesis reactions for Ti3AlC2 through pulse discharge sintering Ti/Al4C3/TiC powder mixture,” Scripta Mater., 55, 767–770 (2006).10.1016/j.scriptamat.2006.07.018 ↗
12. G. N. Romanov, P. P. Tarasov, P. K. D’yachkovskii, and A. P. Savitskii, “Dilatometric analysis of liquidphase sintering of the Al–Ti system,” Izv. Tomsk. Politekh. Univ., No. 1, 114–119 (2006).
13. J. Viala, P. Fortier, and J. Bouix, “Chemical compatibility between aluminum base matrices and light refractory carbide reinforcements,” J. Mater. Sci., 7, 74–83 (1998).
14. Zhenbin Ge, Kexin Chen, and Junming Guo, “Combustion synthesis of ternary carbide Ti3AlC2 in Ti–Al–C system,” J. Europ. Ceram. Soc., 23, 567–574 (2003).10.1016/S0955-2219(02)00098-5 ↗
15. P. Wang, B.-C. Mei, and X.-L. Hong, “Synthesis of Ti2AlC by hot pressing and its mechanical and electrical properties,” Trans. Nonferrous Met. Soc., 17, 1001–1004 (2007).10.1016/S1003-6326(07)60215-5 ↗
16. J. Zhu, L. Ye, and F. Wang, “Fabrication of Ti3AlC2/Al2O3 nanocomposite by a novel method,” Sci. Sint., 43, 289–294 (2011).10.2298/SOS1103289Z ↗
17. Y. Khoptiar and I. Gotman, “Ti2AlC ternary carbide synthesized by thermal explosion,” Mater. Lett., 57, 72–76 (2002).10.1016/S0167-577X(02)00701-2 ↗
18. X. H. Wang and Y. C. Zhou, “Layered machinable and electrically conductive Ti2AlC and Ti3AlC2 ceramics: a review,” J. Mater. Sci. Technol., 26, No. 5, 385–416 (2010).10.1016/S1005-0302(10)60064-3 ↗
19. M. Stolin, D. Vrel, S. N. Galyshev, and A. Hendaoui, “Hot forging of MAX compounds SHS-produced in the Ti–Al–C system,” Int. J. Self-Propag. High-Temp. Synth., 18, 194–199 (2009).10.3103/S1061386209030108 ↗