Electrocaloric Effect of Sm-Doped 0.5BZT–0.5BCT Lead-Free Ceramics
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Acoustic Wave Resonator Technologies · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. B. Peng, H. Fan, and Q. Zhang, “A Giant electrocaloric effect in nanoscale antiferroelectric and ferroelectric phases coexisting in a relaxor Pb0.8Ba0.2ZrO3 thin film at room temperature,” Adv. Funct. Mater., 23, 2987–2992 (2013).10.1002/adfm.201202525 ↗
2. X. Moya, S. Kar-Narayan, and N.D. Mathur, “Caloric materials near ferroic phase transitions,” Nat. Mater., 13, No. 5, 439–450 (2014).10.1038/nmat3951 ↗
3. Annual Review of Materials Research, Mater. Sci., 41, 229–240 (2011).
4. P. Kobeko and J. Kurtschatov, “Dielektrische Eigenschaften der Seignettesalzkristalle,” Zeitschrift für Physik, 66, 192–205 (1930).10.1007/BF01392900 ↗
5. G.G. Wiseman and J.K. Kuebler, “Electrocaloric effect in ferroelectric rochelle salt,” Phys. Rev., 131, 2023–2027 (1963).10.1103/PhysRev.131.2023 ↗
6. A.S. Mischenko, Q. Zhang, J.F. Scott, R.W. Whatmore, and N.D. Mathur, “Giant electrocaloric effect in thin-film PbZr(0.95)Ti(0.05)O3,” Science, 37, 1270–1271 (2006).10.1126/science.1123811 ↗
7. B. Neese, B.J. Chu, S.G. Lu, Y. Wang, E. Furman, and Q.M. Zhang, “Large electrocaloric effect in ferroelectric polymers near room temperature,” Science, 321, 821–823 (2008).10.1126/science.1159655 ↗
8. D. Saranya, A.R. Chaudhuri, J. Parui, and S.B. Krupanidhi, “Electrocaloric effect of PMN-PT thin films near morphotropic phase boundary,” Bull. Mater. Sci., 32, 259–262 (2009).10.1007/s12034-009-0039-3 ↗
9. X.S. Qian, H.J. Ye, Y.T. Zhang, H. Gu, X. Li, C.A. Randall, and Q.M. Zhang, “Giant electrocaloric response over a broad temperature range in modified BaTiO3 ceramics,” Adv. Funct. Mater., 24. 1336 (2014).10.1002/adfm.201470060 ↗
10. G. Vats, A. Kumar, N. Ortega, C.R. Bowen, and R.S. Katiyar, “Giant pyroelectric energy harvesting and a negative electrocaloric effect in multilayered nanostructures,” Energ. Environ. Sci., 9, 1335–1345 (2016).10.1039/C5EE03641K ↗
11. X. Niu, X.B. Jian, X.Y. Chen, H.X. Li, W. Liang, Y.B. Yao, T. Tao, B. Liang, and S.G. Lu, “Enhanced electrocaloric effect at room temperature in Mn2+ doped lead-free (BaSr)TiO3 ceramics via a direct measurement,” J. Adv. Ceram., 10, 482–492 (2021).10.1007/s40145-020-0450-1 ↗
12. S.J. Lu, G.R. Chen, Y.C. Zhang, Z.M. Zhao, F. Li, Z.L. Lv, Z.M. Ma, D.D. Wang, C.J. Lu, and S.D. Li, “Electrocaloric effect in lead-free 0.5Ba(Zr0.2Ti0.8)O30.5(Ba0.7Ca0.3)TiO3 ceramic measured by direct and indirect methods,” Ceram. Int., 44, No. 17, 21950–21955 (2018).10.1016/j.ceramint.2018.08.308 ↗
13. B. Nair, T. Usui, S. Crossley, S. Kurdi, G.G. Guzmán-Verri, X. Moya, S. Hirose, and N.D. Mathur, “Large electrocaloric effects in oxide multilayer capacitors over a wide temperature range,” Nature, 575 (7783), 468–472 (2019).10.1038/s41586-019-1634-0 ↗
14. P. Kumar and C. Prakash, “Enhanced electrocaloric effect in lead free Ba0.90Sr0.10Ti1–3x/4FexO3 ceramics,” J. Alloy. Compd., 839, 155461 (2020).10.1016/j.jallcom.2020.155461 ↗
15. S. Merselmiz, Z. Hanani, D. Mezzane, A.G. Razumnaya, and Z. Kutnjak, “Thermal-stability of the enhanced piezoelectric, energy storage and electrocaloric properties of a lead-free BCZT ceramic,” Rsc. Adv., 11 (16), 9459–9468 (2021).10.1039/D0RA09707A ↗
16. M. Acosta, N. Khakpash, T. Someya, N. Novak, W. Jo, H. Nagata, G.A. Rossetti Jr, and J. Roedel, “Origin of the large piezoelectric activity in (1−x)Ba(Zr0.2Ti0.8)O3–x(Ba0.7Ca0.3)TiO3,” Ceramics, Phys. Rev. B, 91, No. 10, 104108 (2015).
17. X. Niu, X.D. Jian, W.P. Gong, W. Liang, X.T. Gong, G.Z. Zhang, S.L. Jiang, K. Yu, X.B. Zhao, Y.B. Yao, T. Tao, B. Liang, and S. G Lu, “Field-driven merging of polarizations and enhanced electrocaloric effect in BaTiO3-based lead-free ceramics,” J. Adv. Ceram., 11, No. 11, 1777–1788 (2022).10.1007/s40145-022-0647-6 ↗
18. J. Wang, T. Yang, S. Chen, L. Gang, Q. Zhang, and Y. Xi, “Nonadiabatic direct measurement electrocaloric effect in lead-free Ba,Ca(Zr,Ti)O3 ceramics,” J. Alloy. Compd., 550, 561–563 (2013).10.1016/j.jallcom.2012.10.144 ↗
19. B. Yang, H. Xi, and L. Qiao, “Optimized electrocaloric refrigeration capacity in lead-free (1–x)BaZr0.2Ti0.8O3–xBa0.7Ca0.3TiO3 ceramics,” Appl. Phys. Lett., 102, No. 25, 1270 (2013).
20. M. Sanlialp, V.V. Shvartsman, M. Acosta, B. Dkhil, and D.C. Lupascu, “Strong electrocaloric effect in lead-free 0.65Ba(Zr0.2Ti0.8)O3–0.35(Ba0.7Ca0.3)TiO3 ceramics obtained by direct measurements,” Appl. Phys. Lett., 106, 062901 (2015).10.1063/1.4907774 ↗
21. M. Sanlialp, V.V. Shvartsman, M. Acosta, and D.C. Lupascu, “Electrocaloric effect in Ba(Zr,Ti)O3–(Ba,Ca)TiO3 ceramics measured directly,” J. Am. Ceram. Soc., 99, No. 12, 4022–4030 (2016).10.1111/jace.14456 ↗
22. Y. Zhou, Q. Lin, W. Liu, and D. Wang, “Compositional dependence of electrocaloric effect in lead-free (1–x)Ba(Zr0.2Ti0.8)O3–x(Ba0.7Ca0.3)TiO3 ceramics,” Rsc. Adv., 6, No. 17, 14084–14089 (2016).10.1039/C5RA26692K ↗
23. X.D. Jian, B. Lu, D.D. Li, Y.B. Yao, T. Tao, B. Liang, J.H. Guo, Y.J. Zeng, J.L. Chen, and S.G. Lu, “Direct measurement of large electrocaloric effect in Ba(ZrxTi1–x)O3 ceramics,” ACS Appl. Mater. Inter., 10, No. 5, 4801–4807 (2018).10.1021/acsami.7b15933 ↗
24. W. Kleemann, “Relaxor ferroelectrics: Cluster glass ground state via random fields and random bonds,” Phys. Status. Solidi. B, 251, No. 10, 1993–2002 (2014).10.1002/pssb.201350310 ↗
25. M. Zhang, W.L. Wang, G.T. Xia, L.C. Wang, and K. Wang, “Self-powered electronic skin for remote human-machine synchronization,” ACS Appl. Electron. Mater., 5, No. 1, 498–508 (2023).10.1021/acsaelm.2c01476 ↗
26. F. Li, S. Zhang, T. Yang, Z. Xu, N. Zhang, G. Liu, J. Wang, J. Wang, Z. Cheng, Z.G. Ye, J. Luo, T.R. Shrout, and L.Q. Chen, “The origin of ultrahigh piezoelectricity in relaxor-ferroelectric solid solution crystals,” Nat. Commun., 7, 13807 (2016).10.1038/ncomms13807 ↗
27. H. Takenaka, I. Grinberg, S. Liu, and A.M. Rappe, “Slush-like polar structures in single-crystal relaxors,” Nature, 546, 391–395 (2017).10.1038/nature22068 ↗
28. F. Li, D. Lin, Z.B. Chen, Z.X. Cheng, J.L. Wang, C.C. Li, Z. Xu, Q.W. Huang, X.Z. Liao, L.Q. Chen, T.R. Shrout, and S.J. Zhang, “Ultrahigh piezoelectricity in ferroelectric ceramics by design,” Nat. Mater., 17, No. 4, 349–354 (2018).10.1038/s41563-018-0034-4 ↗
29. F. Li, M.J. Cabral, B. Xu, Z. Cheng, E.C. Dickey, J.M. Lebeau, J. Wang, J. Luo, S. Taylor, W. Hackenberger, L. Bellaiche, Z. Xu, L. Chen, T.R. Shrout, and S. Zhang, “Giant piezoelectricity of Sm-doped Pb(Mg1/3Nb2/3)O3–PbTiO3 single crystals,” Science, 364, 264–268 (2019).10.1126/science.aaw2781 ↗
30. F.J. Zheng, X. Tian, Z. Fang, J.F. Lin, Y. Lu, W. Gao, R. Xin, D.S. Fu, Y. Qi, Z.Z. Ma, W.N. Ye, Y.L. Qin, X.X. Wang, and Y.C. Zhang, “Sm-doped PIN-PMN-PT transparent ceramics with high Curie temperature, good piezoelectricity, and excellent electro-optical properties,” ACS Appl. Mater. Inter.,” 15, No. 5, 7053–7062 (2023).10.1021/acsami.2c19865 ↗
31. G. Chen, Y. Zhang, X.M. Chu, G. Zhao, F. Li, J. Zhai, Q. Ren, B. Li, and S. Li, “Large electrocaloric effect in La-doped 0.88Pb(Mg1/3Nb2/3)O3–0.12PbTiO3 relaxor ferroelectric ceramics,” J. Alloy. Compd., 727, 785–791 (2017).10.1016/j.jallcom.2017.08.204 ↗
32. S. Guo, B. Luo, H. Xing, J. Wang, H.M. Zeeshan, K. Jin, and C. Chen, “Ferroelectric, dielectric, and impedance properties of Sm-modified Ba(Zr0.2Ti0.8)O3–x(Ba0.7Ca0.3)TiO3 ceramics,” Ceram. Int., 46, No. 6, 7198–7203 (2020).10.1016/j.ceramint.2019.11.214 ↗
33. A.R. Jayakrishnan, K.V. Alex, A. Thomas, J.P.B. Silva, K. Kamakshi, N. Dabra, K.C. Sekhar, J.A. Moreira, and M.J.M. Gomes, “Composition-dependent xBa(Zr0.2Ti0.8)O3–(1–x)(Ba0.7Ca0.3)TiO3 bulk ceramics for high energy storage applications,” Ceram. Int., 45, No. 5, 5808–5818 (2018).10.1016/j.ceramint.2018.11.250 ↗
34. C. Li, B. Xu, D. Lin, S. Zhang, F. Li, L. Bellaiche, and T.R. Shrout, “Atomic-scale origin of ultrahigh piezoelectricity in samarium-doped PMN–PT ceramics,” Phys. Rev. B, 101, 140102 (2020).10.1103/PhysRevB.101.140102 ↗
35. M. Rao and R. Pandit, “Magnetic and thermal hysteresis in the O(N)-symmetric (Φ2)3 model,” Phys. Rev. B, 43, No. 4, 3373–3386 (1991).10.1103/PhysRevB.43.3373 ↗
36. Lang B. Sidney, “Cryogenic refrigeration utilizing the electrocaloric effect in pyroelectric lithium sulfate monohydrate,” Ferroelectrics,” 11, No. 1, 519–523 (1976).10.1080/00150197608237787 ↗
37. D. Fu, H. Taniguchi, M. Itoh, S.Y. Koshihara, N. Yamamoto, and S. Mori, “Relaxor Pb(Mg1/3Nb2/3)O3: A ferroelectric with multiple inhomogeneities,” Phys. Rev. Lett., 103, 207601 (2009).10.1103/PhysRevLett.103.207601 ↗
38. M. Quintero, L. Ghivelder, F. Gomez-Marlasca, and F. Parisi, “Decoupling electrocaloric effect from Joule heating in a solid state cooling device,” Appl. Phys. Lett., 99, 232908 (2011).10.1063/1.3665949 ↗
39. M. Quintero, P. Gaztanaga, and I. Irurzun, “Intrinsic leakage and adsorption currents associated with the electrocaloric effect in multilayer capacitors,” Appl. Phys. Lett., 107, No. 15, 229–240 (2015).10.1063/1.4933048 ↗
40. Y. Qin, J. Yang, P. Xiong, W. Huang, J. Song, L. Yin, P. Tong, X. Zhu, and Y. Sun, “The effects of quenching on electrical properties, and leakage behaviors of 0.67BiFeO3–0.33BaTiO3 solid solutions,” J. Mater. Sci. Mater. Electron., 29, No. 9, 7311–7317 (2018).10.1007/s10854-018-8720-1 ↗
41. S.J. Lu, J.H. Li, M.Q. Cheng, Q.C. Li, F. Li, Z.L. Lv, Y.C. Zhang, C.J. Lu, and S.D. Li, “Joule heating – A significant factor in the electrocaloric effect,” Ceram. Int., 45, No. 14, 16992–16998 (2019).10.1016/j.ceramint.2019.05.248 ↗