The Infiltration of Lubricants into a Porous Briquette, When Compacting
Source abstract
Abstract
The migration of the boundary layer of lubricant into a porous briquette during compacting is investigated. It is found out that the density of briquettes compacted of a mixture of iron and graphite powders with the addition of animal fat hardly increases with increasing holding under the load, while the ejection pressure increases substantially. It is assumed that the ejection pressure increases due to the infiltration of a lubricant (from the layer between briquette and die wall) into the pores of the briquette. This leads to thinning disrupting the continuity of the lubrication layer and, accordingly, to increasing the external contact friction. The conducted studies allow not only predicting the behavior of viscous lubricants, but also enhancing the possibilities of impregnating the briquettes sintered under high pressure in the die in vacuum.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer Foaming and Composites · Advanced Theoretical and Applied Studies in Material Sciences and Geometry · Advanced Control Systems Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. G. G. Serdyuk and L. I. Svistun, Technology of Powder Metallurgy. Part I. Powders [in Russian], Handbook: in 3 volumes, Kuban, Gos. Tekhnol. Inst., Krasnodar (2005), p. 240.
2. H. Rodrigues, S. Madill, M. Folliard, and T. Liu, Optimizing Compacting Lubricant Selection—a Comparison Study of Various Commercially Available Lubricants, in: Proc. 2008 World Congress on Powder Metallurgy & Particulate Materials (8–12 June 2008, Washington), Washington (2008), pp. 71–79.
3. I. M. Fedorchenko and R. A. Andrievskii, Basics of Powder Metallurgy [in Russian], Izdat. AN UkrSSR, (1961), p. 420.
4. W. Jandeska, Powder Metallurgy Lubrication Study: Lubricant Practice and Tool Coating Effects, in: Center for Powder Metallurgy Technology (August 5, 2011, Quebec), Quebec (2011), pp. 11–15.
5. R. D. O’Brien, Fats and Oils. Formulating and Processing for Applications [Russian translation]. Professiya, Saint-Petersburg (2007), p. 752.
6. E. I. Isachenkov, Contact Friction and Lubricants in Metal Forming Process [in Russian], Mashinoctroyeniye, Moscow (1978), p. 208.
7. V. D. Zozulya, Lubricants for Sintered Self-Lubricated Bearings [in Russian], Nauk. Dumka, Kyiv (1976), p. 192.
8. I. M. Fedorchenko and L. I. Pugina, Composite Sintered Antifriction Materials [in Russian], Nauk. Dumka, Kyiv (1980), p. 404.
9. N. Solimanjad and M. Larsson, Tribological Properties of Lubricants Used in PM Process, in: Proc. Euro PM 2005 (October 4, 2005, Prague), Prague (2005), pp. 123–133.
10. V. N. Kokorin, A. I. Rudskoi, V. I. Filimonov, et al., Theory and Practice of Pressing Iron-Based Heterogeneous Wetted Mechanical Mixtures [in Russian], Gos. Tekh. Inst., Ulyanovsk (2012), p. 236.