Modeling the Strain Hardening of Porous and Powder Materials During Pressing
Source abstract
Abstract
Strain hardening during pressing of powder compacts is commonly described by evaluating the average strain rate intensity. Such data allow predicting the evolution of the average yield stress of powder particles considering the strain hardening of compact material. The accuracy of this approach is assessed by comparing the values of compacting pressure determined by evaluating the average yield stress and by numerically modeling the deformation of representative cells of a porous material. Determining strain hardening from the average strain rate intensity gives a qualitatively correct description of the variation in the compacting pressure. Quantitative differences are observed only at the beginning and at the end of the pressing process, when the strain rate distribution over powder particles becomes sharply nonuniform. Evaluation of the strain hardening of a porous sample is hardly effective without detailed data on the macroscopic yield behavior of powder during pressing. This shortcoming can be avoided by evaluating strain hardening using direct multiscale modeling, which does not require macroscopic constitutive equations in analytical form. The effect of strain hardening on the residual tensile stresses in a synchronizer ring is considered as an example. It is shown that high tensile stresses are responsible for cracks in the blank.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. M. S. Kovalchenko, “Strain hardening of a powder body in pressing,” Powder Metall. Met. Ceram., 48, No. 3/4, 133–144 (2009).10.1007/s11106-009-9118-7 ↗
2. I. F. Martynova, V. V. Skorokhod, and S. M. Solonin, “Plastic deformation in the pressing of powders of ductile metals,” Powder Metall. Met. Ceram., 13, No. 3, 205–209 (1974).10.1007/BF00790636 ↗
3. I. F. Martynova, “Physical features of plastic strains in porous bodies,” in: Rheological Models and Deformation Processes for Porous Powder and Composite Materials [in Russian], Naukova Dumka, Kiev (1985), pp. 98–105.
4. I. F. Martynova and M. B. Shtern, “An equation for the plasticity of a porous solid allowing for true strains of the matrix material,” Powder Metall. Met. Ceram., 17, No. 1, 17–21 (1978).10.1007/BF00795131 ↗
5. M. Yu. Bal’shin, Scientific Foundations of Powder and Fiber Metallurgy [in Russian], Metallurgiya, Moscow (1972).
6. V. V. Skorokhod, “Mean square stresses and deformation rates in a deformed viscous porous substance,” Powder Metall. Met. Ceram., 4, No. 12, 984–988 (1965).10.1007/BF00775442 ↗
7. M. B. Shtern, “Plane deformation characteristics of compressible materials,” Powder Metall. Met. Ceram., 21, No. 3, 169–1750 (1982).10.1007/BF00791675 ↗
8. M. B. Shtern, “Development of the theory of pressing and plastic deformation of powder materials,” Powder Metall. Met. Ceram., 31, No. 9, 735–745 (1992).10.1007/BF00794808 ↗
9. I. F. Martinova and M. B. Shtern, “On the nonlinear creep model for porous bodies,” Sci. Sinter., 26, No. 3, 299–306 (1994).
10. M. B. Shtern, “Revisiting the theory of plasticity of porous bodies and compacted powders,” in: Rheological Models and Deformation Processes for Porous, Powder, and Composite Materials [in Russian], Naukova Dumka, Kiev (1985), pp. 12–23.
11. O. V. Mikhailov, Control of the Consolidation of Powders and the Deformation of Porous Half-Finished Products by Computer Modeling Methods based on the Theory of Plasticity of Porous Bodies [in Russian], ScD Thesis, Kiev (2011).
12. M. B. Shtern and V. D. Dudunov, “Determination of the ultimate plastic capacity for powder materials based on the plastic flow model for porous solids. I. Criterion for exhaustion of the ultimate plastic capacity,” Powder Metall. Met. Ceram., 38, No. 11–12, 560–568 (1999).10.1007/BF02676187 ↗
13. P. S. Follansbee and U. F. Kocks, “A constitutive description of the deformation of copper based on the use of the mechanical threshold stress as an internal state variable,” Acta Met., 36, 81–93 (1988).10.1016/0001-6160(88)90030-2 ↗
14. S. C. Lee, S. Y. Ha, K. T. Kim, et al., “Finite element analysis for deformation behavior of an aluminum alloy composite containing SiC particles and porosities during ECAP,” Mat. Sci. Eng., A 371, 306–312 (2004).10.1016/j.msea.2003.12.029 ↗
15. A. L. Maksimenko, “Direct multiscale modeling of cold pressing of metal powders,” Powder Metall. Met. Ceram., 48, No. 3–4, 145–151 (2009).10.1007/s11106-009-9119-6 ↗
16. L. Federzoni, “Die compaction modeling,” PM Training Courses, 2, 281–297 (2006).
17. D. D. Ivlev and G. I. Bykovtsev, Theory of Strain-Hardening Plastic Body [in Russian], Nauka, Moscow (1971).
18. N. A. Fleck and J. W. Hutchinson, “Strain gradient plasticity,” Adv. Appl. Mech., 33, 295–361 (1997).10.1016/S0065-2156(08)70388-0 ↗