journal article·2008-07

Mechanical-indentation analysis of the microstructure and properties of plasma-sprayed ZrO2-based coatings

V. Yu. Oliker, A. A. Pritulyak, V. F. Gorban’, V. L. Sirovatka

Powder Metallurgy and Metal Ceramics· Volume 47· Issue 7-8
Publisher page

Abstract

The relationship between the mechanical properties of plasma-sprayed thermal-barrier coatings and the properties of feedstock powders is studied. These powders have the same chemical composition and are obtained by hydroxide coprecipitation followed by air-drying and by a cryochemical method. Information on TBC failure mechanisms is used to pose and solve the problem of increasing the plasticity and, consequently, the stress relaxation coefficient of the ceramic coating. The finer structure of the cryochemical powder sprayed coating also improves its crack-resistance. The minor reduction in the hardness of the cryopowder-sprayed coating should not deteriorate the performance of the thermal-barrier coating.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. A. G. Evans, D. R. Mumm, J. W. Hutchinson, et al., “Mechanisms controlling the durability of thermal barrier coatings,” Progr. Mat. Sci., No. 46, 505–533 (2001).
2. D. Stover and C. Funke, “Directions of the development of thermal barrier coatings in energy applications,” J. Mat. Proc. Techn., No. 92–93, 195–202 (1999).10.1016/S0924-0136(99)00244-7 ↗
3. J. Wigren and L. Pejryd, “Thermal barrier coatings: why, how, where and where to,” in: Proc. Int. Thermal Spray Conf. (May 25–29, 1998, Nice, France), Nice (1998), pp. 1531–1542.
4. A. Kulkarni, A. Vaidya, A. Goland, et al., “Processing effects on porosity-property correlations in plasma sprayed yttria-stabilized zirconia coatings,” Mat. Sci. Eng. A, 359, No. 1–2, 100–111 (2003).10.1016/S0921-5093(03)00342-3 ↗
5. R. Vaßen, G. Kerkhoff, and D. Stover, “Development of a micromechanical life prediction model for plasma sprayed thermal barrier coatings,” Mat. Sci. Eng. A, 303, 100–109 (2001).10.1016/S0921-5093(00)01853-0 ↗
6. V. E. Oliker, V. L. Sirovatka, T. Ya. Gridasova, and E. F. Grechishkin, “Scientific and technological principles of the engineering of multi-purpose detonation Ti-Al powder coatings,” in: 4th Int. Conf. on Materials and Coatings in Extreme Conditions: Research, Application, Environmentally Friendly Production and Recycling Technologies (September 18–22, 2006, Yalta, Crimea, Ukraine), Inst. Probl. Materialoved. NAN Ukrainy (2006), p. 323.
7. M. Ahrens, S. Lampenschert, R. Vaben, and D. Stover, “Sintering and creep processes in plasma-sprayed thermal barrier coatings,” J. Thermal Spray Techn., 13, No. 3, 432–442 (2004).10.1361/10599630420434 ↗
8. J. A. Thompson and T. W. Clyne, “The effect of heat treatment of the stiffness of zirconia top coats in plasma-sprayed TBCs,” Acta Mater., No. 49, 1565–1575 (2001).
9. J. P. Singh, B. G. Nair, D. P. Renusch, et al., “Damage evolution and stress analysis in zirconia thermal barrier coatings during cyclic and isothermal oxidation,” J. Am. Ceram. Soc., 84, No. 10, 2385–2393 (2001).10.1111/j.1151-2916.2001.tb01019.x ↗
10. A. A. Pritulyak, T. Ya. Gridasova, O. F. Alekseev, et al., “Studying the influence of production techniques on the properties of ZrO2 powders for plasma-sprayed coatings,” Metaloznav. Obrob. Metal., No. 3, 69–71 (2004).
11. Yu. V. Mil'man, “Noval techniques for micromechanical tests of materials by local loading with a rigid indenter,” in: Contemporary Materials Science in the 21 century [in Ukrainian], Naukova Dumka, Kyiv (1998), pp. 637–656.