Diffusion Interaction in Fiber-Reinforced Composites of the Chromium Alloy – Silicon Carbide System
Source abstract
Abstract
Diffusion interaction in the Cr – ZrC and Cr – HfC systems has been studied in the temperature range 1200-1400°C. The impurities contained in chromium or carbides were found to affect the interaction in the systems. Almost no interaction was observed when the systems were held at temperatures up to 1300°C for 100 h. At higher temperatures the carbides were reduced to ZrO2, HfO2, and Cr23C6 because of the presence of a slight amount of oxygen. Thermodynamic calculations indicated no interaction in these systems at temperatures up to 1600°C. A study of the interaction in the systems SiC – ZrC and SiC – HfC showed that a transition zone formed already in the stage of sample preparation by diffusion welding in vacuum (1300°C, vacuum of 10_3 Pa, with a load applied for 20 min). During annealing (1300°C, 50 h) the transition zone stratified, forming a solid solution of silicon in Zr(Hf)C and SiC inclusions in the SiC – Zr(Hf)C solid solution. A transition zone formed on the zirconium carbide side when SiC interacted with Zr(Hf)C. The interaction in SiC – Zr(Hf)C casts doubt on the use of them as a barrier without antidiffusion layers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. J. Wheaton and E. Skal (eds.), Fibrous Composites [Russian translation], Metallurgiya, Moscow (1978).
2. E. J. Lumllyt and L. M. Gillint, “Diffusion at the interface of the silicon carbide fibres in a chromium matrix, ” J. Australian Inst. Metals, 14, No. 4, 266 (1969).
3. V. I. Trefilov, L. R. Vishnyakov, V. V. Gorskii, et al., “Compatibility of W and SiC fibers with low-alloyed chromium, ” in: Composites and Aircraft Engine Production [in Russian], No. 1, TsIAM, Moscow (1978), pp. 114–124.
4. V. I. Trefilov, V. V. Gorskii, V. P. Dorokhovich, et al., “Investigation of the structural and mechanical thermal stability of silicon carbide fibers, ” in: Composites and Aircraft Engine Production [in Russian], No. 1, TsIAM, Moscow (1978), pp. 104–113.
5. G. V. Samsonov and I. M. Vinitskii, Refractory Compounds [in Russian], Metallurgiya, Moscow (1976).
6. A. K. Shurin and G. P. Dmitrieva, ”Phase diagrams of the Cr HfC and Cr ZrC systems, ” Metallofizika, No. 5, 105–109 (1974).
7. O. M. Barabash, V. G. Ivanchenko, and V. N. Svechnikov, “Influence of lanthanum, cerium, zirconium, and vanadium on the solubility of nitrogen in chromium, ” in: Phase Diagrams of Metal Systems. Thermodynamic Calculations and Experimental Methods [in Russian], Nauka, Moscow (1981).
8. V. N. Gridnev, V. G. Ivanchenko, V. V. Pogorelaya, et al., “Phase equilibria in alloys of the Cr Hf N system, ” Poroshk. Metall., No. 8, 76–81 (1988).
9. D. M. Karpinos, T. Ya. Kosolapova, V. G. Samoilenko, et al., “Use of titanium carbide and zirconium carbide coatings as diffusion barriers in composites, ” Zashchitnye Pokrytiya na Metallakh, No. 8, 150–155 (1974).
10. T. Ya. Kosolapova and É. V. Kutysheva, “Interaction of zirconium carbide and silicon carbide powders, ” Poroshk. Metall., No. 11, 61–65 (1969).
11. R. Kiffer and F. Benezowski, Hard Materials [Russian translation], Metallurgiya, Moscow (1968).
12. I. I. Kornilov, V. V. Glazova, and E. M. Kenina, “Phase equilibria in the binary zirconium oxygen system and the new suboxides Zr6O and Zr3O, ” Zhurn. Neorgan. Khim., 12, No. 10, 2812–2817 (1967).
13. I. I. Kornilov, Titanium [in Russian], Nauka, Moscow (1975).
14. V. I. Rakcheeva, L. A. Mashkovich, G. A. Perkova, et al., “Interaction of zirconium and silicon in the presence of excess carbon, ” Poroshk. Metall., No. 5, 57–61 (1972).
15. R. F. Voitovich, Oxidation of Carbides and Nitrides [in Russian], Nauk. Dumka, Kiev (1981).