The Influence of Synthesis Temperature on the Phase Composition and Structure of Ternary Compounds Produced from TiH2–Si–C Powder Mixtures
Source abstract
Abstract
The paper examines the formation of phases and structure in ternary compounds produced by thermal synthesis from the TiH2–Si–C powder mixture. The alloys were thermally synthesized in vacuum at 1150, 1300, and 1400°C. According to X-ray diffraction and structural analysis, titanium carbide is the major phase in the alloy synthesized at 1150°C. The alloy also contains a Ti5Si3 silicide phase and an insignificant amount of free carbon. When synthesis temperature increases to 1300°C, the titanium carbide content decreases and a Ti5Si4 silicide phase and ternary Ti3SiC2 compound show up in the alloy. When synthesis temperature increases further to 1400°C, the alloy mainly consists of laminar ternary Ti3SiC2 grains and an insignificant amount of titanium carbide and Ti5Si4 intermetallide. An increase in the synthesis temperature from 1150 to 1400°C leads to a significant growth of grains representing the main alloy components.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: MXene and MAX Phase Materials · Intermetallics and Advanced Alloy Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. M.W. Barsoum, MAX Phases: Properties of Machinable Ternary Carbides and Nitrides, Wiley VCH (2013), p. 436.
2. M. Radovic and M.W. Barsoum, “MAX phases: Bridging the gap between metals and ceramics,” Am. Ceram. Soc. Bull., 92, No. 3, 20–27 (2013).
3. M.W. Barsoum, D. Brodkin, and T. El-Raghy, “Layered machinable ceramics for high-temperature application,” Scr. Mater., 36, No. 5, 535–541 (1997).10.1016/S1359-6462(96)00418-6 ↗
4. C. Racault, F. Langlais, and R. Naslain, “Solid-state synthesis and characterization of the ternary phase Ti3SiC2,” J. Mater. Sci., 29, No. 13, 3384–3392 (1994).10.1007/BF00352037 ↗
5. F. Sato, J.F. Li, and R. Watanabe, “Reaction synthesis of Ti2SiC2 from mixture of elemental powders,” Mater. Trans. Jpn. Inst. Met., 41, No. 5, 605–609 (2000).
6. Z.F. Zhang, Z.M. Sun, H. Hashimoto, and T. Abe, “Application of pulse discharge sintering technique to the rapid synthesis of Ti3SiC2 from Ti/Si/C powders,” J. Eur. Ceram. Soc., 22, No. 16, 2957–2961 (2002).10.1016/S0955-2219(02)00044-4 ↗
7. S. Yang, Zh. M. Sun, and H. Hashimoto, “Reaction in Ti3SiC2 powder synthesis from a Ti–Si–TiC powder mixture,” J. Alloys Compd., 368, 312–317 (2004).10.1016/j.jallcom.2003.07.018 ↗
8. Z.F. Zhang, Zh.M. Sun, H. Hashimoto, and T. Abe, “Fabrication and microstructure characterization of Ti3SiC2 synthesized from Ti/Si/2TiC powders using the pulse discharge sintering (PDS) technique,” J. Am. Ceram. Soc., 86, No. 3, 431–436 (2003).10.1111/j.1151-2916.2003.tb03317.x ↗
9. Z.F. Zhang, Zh.M. Sun, H. Hashimoto, and T. Abe, “Effects of sintering temperature and Si content on the purity of Ti3SiC2 synthesized from Ti/Si/TiC powders,” J. Alloys Compd., 352, 283–289 (2003).10.1016/S0925-8388(02)01171-4 ↗
10. D.P. Riley, E.H. Kisi, E. Wu, and A. McCallum, “Self-propagating high-temperature synthesis of Ti3SiC2 from 3Ti+SiC+C reactants,” J. Mater. Sci. Lett., 22, No. 15, 1101–1104 (2003).10.1023/A:1024995126534 ↗
11. Z.F. Zhang, Z.M. Sun, H. Hashimoto, and T. Abe, “A new synthesis reaction of Ti3SiC2 through pulse discharge sintering Ti/SiC/TiC powder,” Scr. Mater., 45, 1461–1467 (2001).10.1016/S1359-6462(01)01184-8 ↗
12. O.M. Ivasishin, A.N. Demidik, and D.G. Savvakin, “Use of titanium hydride for the synthesis of titanium aluminides from powder materials,” Powder Metall. Met. Ceram., 38, No. 9–10, 482–487 (1999).10.1007/BF02676065 ↗
13. G.A. Bagliuk, O.V. Suprun, and A.A. Mamonova, “Effect of synthesis temperature on the phase composition and structure of ternary compounds produced from TiH2–Al–C powder mixtures,” Fiz. Khim. Tverd. Tela, 18, No. 4, 438–443 (2017).
14. G.A. Bagliuk, O.V. Suprun, and A.A. Mamonova, “Structurization of multicomponent compounds from TiH2–Fe–Si–Mn–C–(B4C) powder mixtures in thermal synthesis,” Nauk. Notatki, No. 58, 27–35 (2017).
15. L. Lutterotti, “Introduction to diffraction and the Rietveld method,” URL: http://www.ing.unitn.it/~luttero/laboratoriomateriali/RietveldRefinements.pdf , p. 56.
16. S. Yang, Zh.M. Sun, H. Hashimoto, and T. Abe, “Synthesis of single-phase Ti3SiC2 powder,” J. Eur. Ceram. Soc., 23, 3147–3152 (2003).10.1016/S0955-2219(03)00096-7 ↗
17. H.B. Zhang, Y.C. Zhou, Y.W. Bao, M.S. Li, and J.Y. Wang, “Intermediate phases in synthesis of Ti3SiC2 and Ti3Si(Al)C2 solid solutions from elemental powders,” J. Eur. Ceram. Soc., 26, 2373–2380 (2006).10.1016/j.jeurceramsoc.2005.04.010 ↗