journal article·2016-09

Process Approaches for Producing Complex Composite Inoculants by Rolling of Powder Mixtures. I. Inoculant Powder Mixtures. Composition, Structure, and Properties

K. A. Gogaev, S. M. Voloshchenko, Yu. N. Podrezov, A. K. Radchenko, L. A. Radchenko

Powder Metallurgy and Metal Ceramics· Volume 55· Issue 5-6
Publisher page

Abstract

This series of papers are devoted to the development of process approaches for producing complex composite inoculants to manufacture agricultural machines from spheroidal graphite cast iron. Complex composite inoculants as strips and their fragments can be produced by rolling of powder mixtures. The first paper justifies the choice of inoculants and characterizes the starting powders they consist of. Weight and volume correlations between the brittle and ductile components for different compositions of inoculants are calculated. It is established that all powder compositions belong to critical systems that have approximately 50 vol.% of both brittle and ductile components. Such systems require special process approaches to make high-quality products. Process characteristics of the powders that influence the quality of the rolling strips are determined. These are apparent density of the starting powders and their mixtures, friction index (Hausner ratio), and shear angle and its tangent.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Systems and Engineering · Material Properties and Applications · Engineering Technology and Methodologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. K. I. Vashchenko and L. Sofroni, Magnesium Cast Iron [in Russian], Mashgiz, Moscow–Kyiv (1960), p. 485.
2. V. I. Litovko, Improving the Quality of Ductile Iron Castings [in Russian], Naukova Dumka, Kyiv (1987), p. 202.
3. É. V. Zakharchenko, Yu. N. Levchenko, V. G. Gorenko, and P. A. Varenik, Spheroidal and Vermicular Graphite Iron Castings [in Russian], Naukova Dumka, Kyiv (1986), p. 248.
4. É. A. Taran, “Cast iron treatment with iron–magnesium pellets,” Litein. Proizv., No. 7, 30 (1972).
5. A. D. Sherman, In-Mold Inoculation of Ductile Iron with Pellets. Production Technology and Management [in Russian], Dep. UkrNIINTI 30.9.87, No. 1081 UK-D83, Kyiv (1983), p. 98.
6. A. F. Hieber and T. Watmough, “An in-ladle treatment process for producing ductile iron with elemental magnesium,” Mod. Casting, 71, No. 2, 48–49 (1981).
7. K. J. Best and K. J. Reiferscheid, “Stream inoculation technology for introduction of additions,” Giesserei Praxtis, No. 3, 29–36 (1982).
8. G. I. Aksenov, A. N. Nikolaev, and Yu. N. Semenov, “Rolling of powders into strips,” in: Issues of Powder Metallurgy and Metal Strength [in Russian], Izd. AN USSR, Issue 2, Kyiv (1955), pp. 119–140.
9. G. A. Vinogradov, Yu. N. Semenov, O. A. Katrus, and V. P. Katashinskii, Rolling of Metal Powders [in Russian], Metallurgiya, Moscow (1969), p. 384.
10. G. A. Vinogradov, “Method of calculating the density and thickness of porous rolled strips,” Powder Metall. Met. Ceram., 2, No. 5, 356–360 (1963).10.1007/BF01194669 ↗
11. O. A. Katrus, “Calculation of processing parameters of powder strip rolling from the apparent density of powders,” Powder Metall. Met. Ceram., 20, No. 2, 89–94 (1981).10.1007/BF00791443 ↗
12. K. A. Gogaev and A. K. Radchenko, Formation of Powder Systems [in Russian], Knowledge, Donetsk (2011), p. 477.
13. K. A. Gogaev, V. S. Voropaev, G. Ya. Kalutskii, et al., “Production of titanium powder sheets by asymmetric rolling,” Powder Metall. Met. Ceram., 51, Nos. 9–10, 509–517 (2012).
14. K. A. Gogaev, V. S. Voropaev, Yu. N. Podrezov, et al., “Asymmetric rolling for strengthening of compact and porous titanium,” in: Proc. Conf. High-Pressure Physics and Technology 2006 (September 21–24, 2006, Sudak) [in Russian], Kyiv (2006), p. 72.
15. G. Hubenov, W. Stamenov, and D. Dimitrow, “Influence of the composition of complex inoculants for spheroidal graphite cast iron on its effectiveness,” in: 48th Int. Foundry Congress, Prepr. No. 19, Varna (1981), pp. 184–192.
16. N. N. Aleksandrov (ed.), Ductile Cast Iron for Castings [in Russian], Mashinostroenie, Moscow (1982), p. 222.
17. K. I. Vashchenko and A. P. Rudoi, “Cast iron surface tension,” Litein. Proizv., No. 6, 24–27 (1962).
18. Yu. V. Moiseev and G. P. Borisov, “Effect of rare earth elements on the surface tension of cast iron and wetting of graphite with molten cast iron,” in: Physical Chemistry of Surface Phenomena at High Temperatures [in Russian], Naukova Dumka, Kyiv (1974), pp. 160–162.
19. D. Paul, E. Ross, and E. Shiloh, “Effect of free and bound magnesium on the formation of globular graphite” in: Int. Foundry Congress (October 7–10, 1959, Madrid), Mashgiz, Moscow (1961), pp. 183–199.
20. L. I. Kozhinskii, “On magnesium master alloys for the production of ductile iron,” Litein. Proizv., No. 4, 9 (1977).
21. V. V. Dubrov, R. A. Denisevich, and Yu. A. Dudnik, “Calcium as an inoculant for producing spheroidal graphite cast iron,” in: Production, Properties, and Application of Spheroidal Graphite Cast Iron [in Russian], Inst. Probl. Lit. AN USSR, Kyiv (1971), pp. 9–115.
22. Yu. N. Podrezov, D. G. Verbylo, and Ya. I. Evich, “Role of shear strains in the consolidation of powder materials,” Fiz. Tekh. Vys. Davl., No. 1, 46–54 (2014).