Structure and Properties of Ceramics Based on Monetite and Nanodispersed Silica
Source abstract
Abstract
Calcium–phosphate ceramics based on monetite and nanosized silica are produced by sintering at 500°C. It is established that phase changes and solid-phase reactions occur during sintering to form ceramics that contain β-calcium pyrophosphate (Ca2P2O7), calcium silicate (wollastonite, CaSiO3), and insignificant amount of β-tricalcium phosphate (Ca3(PO4)2). It is shown that the addition of silica inhibits re-crystallization of calcium pyrophosphate into tricalcium phosphate, if compared with ceramics prepared from monetite with no silica added. It is established that increasing the silica content in the starting composition leads to a decrease in the minimum pore size from 0.83 to 0.21 μm. Highly pure nanosized silica (content of SiO2 > 99%) prepared by heat-treating of silicon carbide waste in a solar furnace is used in our research. The porosity of ceramics produced reaches 43.5–46.8% and the compressive strength is 16–24 MPa.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Recycling and utilization of industrial and municipal waste in materials production · Pigment Synthesis and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. T. V. Safronova and V. I. Putlyaev, “Medical non-organic materials of science in Russia: calcium phosphate materials,” Nanosis.: Fiz. Khim, Matem., 4, No. 1, 24–47 (2013).
2. L. Cheng, F. Ye, R. Yang, et al., “Osteoinduction of hydroxyapatite/β-tricalcium phosphate bio-ceramics in mice with a fractured fibula,” Acta Biomater., 6, No. 4, 1569–1574 (2010).10.1016/j.actbio.2009.10.050 ↗
3. S. Padilla, J. Roman, S. Sanchez-Salcedo, and M. Vallet-Regi, “Hydroxyapatite/SiO2–CaO–P2O5 glass materials: In vitro bioactivity and biocompatibility,” Acta Biomater., 2, No. 3, 331–342 (2006).10.1016/j.actbio.2006.01.006 ↗
4. A. G. Veresov, V. I. Putlyaev, and Yu. L. Tretyakov, “Achievements in calcium phosphate bio-materials,” Ros. Khim. Zh., 44, No. 6, 32–46 (2000).
5. O. E. Sych, Y. D. Pinchuk, L. A. Ivanchenko, and O. R. Parkhomey, Calcium Phosphate Composite Bio- Material [in Ukrainian], Ukrainian Patent 43042 Ukraine, MPK A61K 33/42, A61R 19/00. Applicant and Owner: Frantsevich Institute for Problems of Materials Science, NAS of Ukraine. No. 02943/2009; Appl. 30.03.2009; Publ. 27.07.2009; Bull. No. 14, p. 3.
6. F. Tamimi, J. Torres, D. Bassett, et al., “Resorption of monetite granules in alveolar bone defects in human patients,” Biomaterials, 31, No. 10, 2762–2769 (2010).10.1016/j.biomaterials.2009.12.039 ↗
7. V. M. Vagabov, I. S. Kulaev, and T. V. Kulakovskaya, “High molecular weight inorganic polyphosphates: Biochemistry, Cell biology, Biotechnology,” Nauch. Mir, Moscow (2005), p. 216.
8. J. S. Sun, Y. H. Tsuang, C. J. Liao, et al., “The effect of sintered β-dicalcium pyrophosphate particle size on newborn wistar rat osteoblasts,” Artif. Organs, 23, No. 4, 331–338 (1999).10.1046/j.1525-1594.1999.06235.x ↗
9. K. H. Karlsson, “Bioactivity of glass and its relation to galss structure,” Glass. Phys. Chem., 24, No. 3, 280–284 (1998).
10. X. W. Li, H. Y. Yasuda, and Y. Umakoshi, “Bioactive ceramic composites sintered from hydroxyapatite and silica at 1200°C: preparation, microstructures and in vitro bone-like layer growth,” J. Mater. Sci.: Mater. Med., 17, 573–581 (2006).10.1007/s10856-006-8942-2 ↗
11. C. Q. Ning, J. Mehta, and A. El-Ghannam, “Effects of silica on the bioactivity of calcium phosphate composites in vitro,” J. Mater. Sci.: Mater. Med., 16, 355– 360 (2005).10.1007/s10856-005-0635-8 ↗
12. S. Xu, K. Lin, Z. Wang, et al., “Reconstruction of calvarial defect of rabbits using porous calcium silicate bioactive ceramics,” Biomaterials, 29, No. 17, 2588–2596 (2008).10.1016/j.biomaterials.2008.03.013 ↗
13. T. Saito, M. Takemoto, S. Fujibayashi, et al., “Quantitative comparison of osteoconduction between porous apatite and wollastonite-containing glass-ceramics with 5 different pore sizes,” Bioceram. Dev. App., 1, 1–3 (2011).10.4303/bda/D110152 ↗
14. H. H. Beheri, K. R. Mohamed, and G. T. El-Bassyouni, “Microstructure and mechanical properties of reinforced hydroxyapatite/calcium silicate nano-composite materials,” Mater. Design, 44, 461–468 (2013).10.1016/j.matdes.2012.08.020 ↗
15. V. V. Shumkova, V. M. Pogrebenkov, V. A. Karlov et al., “Hydroxylapatite–wollastonite bio-ceramics,” Stek. Keram., No. 10, 18–21 (2000).
16. H. Li and J. Chang, “Fabrication and characterization of bioactive wollastonite/PHBV composite scaffolds,” Biomaterials, 25, No. 24, 5473–5480 (2004).10.1016/j.biomaterials.2003.12.052 ↗
17. K. Xiao, K. W. Dalgarno, D. J. Wood, et al., “Indirect selective laser sintering of apatite-wollostonite glassceramic,” Proc. Inst. Mech. Eng. H., 222, 1107–1114 (2008).10.1243/09544119JEIM411 ↗
18. X. Liu, C. Ding, and P. K. Chu, “Mechanism of apatite formation on wollastonite coatings in simulated body fluids,” Biomaterials, 25, No. 10, 1755–1761 (2004).10.1016/j.biomaterials.2003.08.024 ↗
19. M. A. Encinas-Romero, J. Peralta-Haley, J. L. Valenzuela-García1, et al., “Synthesis and structural characterization of hydroxyapatite-wollastonite biocomposites, produced by an alternative sol-gel route,” J. Biomater. Nanobiotech., 4, 327–333 (2013).
20. S. A. Saadaldin and A. S. Rizkalla, “Synthesis and characterization of wollastonite glass–ceramics for dental implant applications,” Dent. Materi., 30, No. 3, 364–371 (2014).10.1016/j.dental.2013.12.007 ↗
21. V. V. Pasichnyi, S. O. Ostapenko, and M. I. Danilenko, “Study of thermal recycling of silicon carbide waste in a solar furnace,” in: Modern Problems of Physical Materials Science (by Frantsevich Institute for Problems of Materials Science, NAS of Ukraine), Fiz. Khim. Osn. Tekhnol. Porosh. Mater., No. 21, 164– 170 (2012).
22. T. Kanazawa (ed.), Inorganic Phosphate Materials, Elsevier, Tokyo (1989).
23. T. V. Safronova, V. I. Putlyaev, A. V. Kuznetsova et al., “Properties of calcium phosphate powder synthesized from calcium acetate and sodium hydrogen,” Stek. Keram., No. 4, 30–34 (2011).