journal article·2013-09

Effects of Heating Rate and Sintering Temperature on Micro Forming of 316L Stainless Steel Powder Under Multifield Coupling

Ankang Du, Yi Yang, Yi Qin, Gang Yang

Powder Metallurgy and Metal Ceramics· Volume 52· Issue 5-6
Publisher page

Abstract

316L stainless steel powders with an average particle size of 20 μm were sintered at different heating rates under multi-field action in a Gleeble-1500D thermal simulation instrument. It was shown that both heating rate and sintering temperature directly affected the densification of sintering products, and the electric field not only provided the Joule heat for densification of preform, but also accelerated the diffusion of atoms, which leads to intensified sintering. Multi-field action includes the stress field, temperature field and electric field, and these fields work reciprocally rather than independently. The relative density of the sintered compact can be of the order of 88.9% at relatively low temperature (500°C) within relatively short sintering time (6 min).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Injection Molding Process and Properties · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. M. P. Harmer and R. J. Brook, “Fast firing-microstructure benefits,” J. Brit. Ceram. Soc., 80, 147–148 (1981).
2. G. D. Cremer, Sintering Together Powders Metals such as Bronze, Brass, or Aluminum, US Patent No. 2 355 954, August (1944).
3. F. V. Lenel, “Resistance sintering under pressure,” JOM, 7, 158–167 (1955).10.1007/BF03377473 ↗
4. J. R. Groza and A. Zavaliangos, “Sintering activation by external electrical field,” Mater. Sci. Eng. A, 287, 171–177 (2000).10.1016/S0921-5093(00)00771-1 ↗
5. M. Zadra, F. Casari, L. Girardini, and A. Molinari, “Spark plasma sintering of pure aluminum powder: mechanical properties and fracture analysis,” Powder Metall., 50, 40–45 (2007).10.1179/174329007X186417 ↗
6. F. A. Deorsola and D. Vallauri, “Densification of ultrafine WC–12Co cermets by pressure assisted fast electric sintering,” Int. J. Refract. Met. Hard Mater., 28, 254–259 (2010).10.1016/j.ijrmhm.2009.10.007 ↗
7. Wayne Chen, Gleeble System and Application, 1st ed., Gleeble System School (1998).
8. Z. A. Munir, “The effect of external electric fields on the nature and properties of materials synthesized by self-propagating combustion,” Mater. Sci. Eng. A, 287, 125–137 (2000).10.1016/S0921-5093(00)00765-6 ↗
9. H. B. Huntington, in: A. S. Nowick and J. J. Burton (eds.), Diffusion in Solids, Academic Press, New York (1975), p. 303.10.1016/B978-0-12-522660-8.50011-8 ↗
10. Keqin Feng, Ji Xiong, Lan Sun, et al., “The process of combustion synthesis of WC-Co composites under the action of an electric field,” J. Alloys Compd., 504, 277–283 (2010).10.1016/j.jallcom.2010.05.112 ↗
11. B. L. Gu and X. K. Wang, Solid State Physics, 1st ed., Tsinghua University Press, Beijing (1989).
12. H. Jabbar, A. Couret, L. Durand, and J.-P. Monchoux, “Identification of microstructural mechanisms during densification of a TiAl alloy by spark plasma sintering,” J. Alloys Compd., 509, 9826–9835 (2011).10.1016/j.jallcom.2011.08.008 ↗
13. R. Holm, Electric Contacts: Theory and Applications, 4th ed., Springer, New York (1967).10.1007/978-3-662-06688-1 ↗
14. A. K. Eksi and A. H. Yuzbasioglu, “Effect of sintering and pressing parameters on the densification of cold isostatically pressed Al and Fe powders,” Mater. Des., 28, 1364–1368 (2007).10.1016/j.matdes.2006.01.018 ↗
15. K. E. Stitzer, M. D. Smith, and H.-C. zur Loye, “Crystal growth, structure determination and magnetic properties of Ba4Ir3O10 and Ba4 (Co0.4 Ir0.6) Ir3O10,” J. Alloys Compd., 338, 104–111 (2002).10.1016/S0925-8388(02)00222-0 ↗
16. R. M. German, “Supersolidus liquid-phase sintering of prealloyed powders,” Metall. Mater. Trans. A, 28, 553–1567 (1997).10.1007/s11663-997-0028-0 ↗
17. Geng Chen Guo, Liquid Sintering Metallurgical Powder Material, 1st ed., Chemical Industry Press, Beijing (2003).
18. R. Bollina and R. M. German, “Heating rate effects on microstructural properties of liquid phase sintered tungsten heavy alloys,” Int. J. Refract. Met. Hard Mater., 22, 117–127 (2004).10.1016/j.ijrmhm.2004.01.006 ↗
19. G. S. Upadhyaya, “Materials science of cemented carbides—an overview,” Mater. Des., 22, 483–489 (2001).10.1016/S0261-3069(01)00007-3 ↗
20. S. Mrowee, Defects and Diffusion in Solids, 1st ed., Elsevier, Amsterdam (1980).
21. D. A. Porter and K. E. Easterling, Phase Transformations in Metals and Alloys, McGraw-Hill (1980).
22. R. M. German, Sintering Theory and Practice, Wiley, New York (1996).
23. K. M. Shorowordi, T. Laoui, A. S. M. A. Haseeb, et al., “Microstructure and interface characteristics of B4C, SiC and Al2O3 reinforced Al matrix composites,” J. Mater. Process. Technol., 142, 738–743 (2003).10.1016/S0924-0136(03)00815-X ↗
24. E. Saiz, A. P. Tomsia, and K. Suganuma, “Wetting and strength issues at Al/α-alumina interfaces, J. Eur. Ceram. Soc., 23, 2787–2796 (2003).10.1016/S0955-2219(03)00290-5 ↗
25. Dat V. Quach and Hugo Avila-Paredes, “Pressure effects and grain growth kinetics in the consolidation of nanostructured fully stabilized zirconia by pulsed electric current sintering,” Acta Mater., 58, 5022–5030 (2010).10.1016/j.actamat.2010.05.038 ↗
26. J. Liu, A. Lal, and R. M. German, “Densification and shape retention in supersolidus liquid phase sintering,” Acta Mater., 47, 4615–4626 (1999).10.1016/S1359-6454(99)00320-1 ↗
27. O. A. Troitskii, “Effect of the electron state of a metal on its mechanical properties and the phenomenon of electroplasticity,” Phys. Met. Metall., 9, 38–46 (1977).