journal article·2021-03

Effect of Reinforcement with Micro- and Ultradispersed Diamond Powders on the Properties of Diamond Tubular Drills During the Processing of Some Non-Metallic Materials

V.P. Umansky, V.P. Krasovsky, O.A. Bashchenko

Powder Metallurgy and Metal Ceramics· Volume 59· Issue 11-12
Publisher page

Abstract

The study presents the results of comparative laboratory tests of diamond tubular drills when drilling window glass, granite, and abrasive stones based on silicon carbide SiC. The tests were carried out in cold running water. Tin bronze containing micro- and ultradispersed diamond powders of ASM 40/28, ASM 10/7 (MDP), ASM 1/0 (UDDP) grades, and molybdenum powder were used as a matrix of the tool. Furthermore, the dependence of the hardness of specially prepared matrix samples on their composition was examined. With an increase in the ASM 1/0 concentration up to 5 wt.% in the reinforcement, the hardness of the matrix samples increased by one-third and reached a maximum of ~96.5 HRB. A further increase in the ASM 1/0 concentration led to a slight decrease in the hardness of the samples. The use of larger diamond powders required a higher concentration, providing high values of hardness. By adding ASM 10/7 in an amount of 10 wt.% and ASM 40/28 in the amount of 40–60 wt.% we managed to increase the hardness of the matrix to the same maximum. The introduction of a reinforcement in a bonding matrix of diamond tubular drills in amount ensuring its maximum hardness has significantly increased the efficiency of their operation. Thus, the wear of drills after glass processing decreased by 2–6 times, and the drilling speed increased by 3–4 times. Drill wear after granite processing has decreased by 50–84 times, and the drilling speed has increased 2.7–6 times, correspondingly. Finally, after processing of an abrasive stone based on silicon carbide SiC, the wear of diamond tubular drills decreased by 1.4– 2.9 times, and the drilling speed increased by 1.5–2.5 times. The effect of additives in the reinforcement of the tool depended on the choice of the diamond powder grade and their concentration. The best option was the introduction of ASM 1/0 (UDDP) powder in an amount of 5– 9 wt.%. The introduction of ASM 10/7, and especially ASM 40/28 (MDP), into the reinforcement required, firstly, their higher concentration (10–40 wt.%), and secondly, was not effective enough since the wear indicators of diamond tools were higher, and the drilling speed was lower.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Tunneling and Rock Mechanics · Advanced materials and composites · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. V.N. Bakul, Basics of Design and Manufacturing Technology of Abrasive and Diamond Tools [in Russian], Mashinostroenie, Moscow (1975), p. 297.
2. Yu.V. Naidich, G.A. Kolesnichenko, I.A. Lavrinenko, and Ya.F. Motsak, Soldering and Metal Plating of Superhard Tool Materials [in Russian], Naukova Dumka, Kyiv (1977), p. 186.
3. D. Evans, M. Nicholas, and P. Scott, “The wetting and bonding of diamonds by copper titanium alloys,” Ind. Diamond Rev., 9, 306–309 (1977).
4. A.A. Bugaev, V.N. Livshits, and V.V. Ivanov, Synthetic Diamonds in Geological Prospecting Drilling [in Russian], Naukova Dumka, Kyiv (1978), p. 232.
5. N.V. Novikov (ed.), Synthetic Superhard Materials, Vol. 2, Composite Tool Superhard Materials [in Russian], Naukova Dumka, Kyiv (1986), p. 264.
6. Yu.V Naidich, V.P. Umanskii, and I.A. Lavrinenko, Strength of the Diamond–Metal Interface and Brazing of Diamonds, Cambridge International Science Publishing (2007), 160 p.
7. V.P. Umansky, “Improvement of diamond tubular drills performance characteristics by metallization of diamonds with chromium,” Adgez. Raspl. Paika Mater., Issue 40, 98–102 (2007).
8. A.F. Chertovich, A.P. Pankevich, and I.V. Balashova, “Composition of metallic bonds for processin of hard materials (Patent review),” Almazy Sverkhtverd. Mater., 3, 12–14 (1981).
9. N.I. Kornilov, V.S. Travkin, L.K. Beresten, and D.I. Kogan, Rock Destruction Tool for Geological Prospecting Wells, Handbook, Nedra, Moscow (1979), 359 p.
10. V.P Pereyaslov, L.P. Primak, and M.N. Voloshin, “Diamond tools with a titanium bonding matrix,” Superh. Mater., 2, 27–29 (1987).
11. Tetsuo Nakai, Akio Hara, and Danki Sumitomo, “Diamond cutting tools,” Japan Patent 60–260589, publ. June 2 (1987).
12. H. Steidle, “Machining bores in aluminium alloys,” Ind. Diamond Rev., 47, No. 523, 247–248 (1987).
13. E.E Ashkinazi, A.A. Shulzhenko, and V.G. Gargin, “Diamond polycrystalline composite material with dispersion-strengthened nickel-based additive,” Superhard Mater., No. 5, 95–98 (2013).10.3103/S1063457613050092 ↗
14. L.L. Ostrovsky and V.A. Murovsky, “Metallic bonding for abrasive tools production,” USSR Patent 452489, publ. December 25 (1996), Bulletin No. 4.
15. G.G. Kariuk, A.A. Adamovsky, and A.A. Aranovich, “Abrasive mass,” Ukrainian Patent 12217, publ. December 25 (1996), Bulletin No. 4.
16. A.A. Zaitsev, D.A. Sidorenko, and E.A. Levashov, “Diamond tool for cutting highly reinforced concrete with dispersion-strengthened metal bonded nanoparticles,” Superhard Mater., No. 6, 78–89 (2010).
17. N.V. Novikov, G.P. Bogatyreva, and R.K. Bogdanov, “Influence of nanodispersed diamond additives on physical and mechanical properties of metal matrix of drilling tools,” Superhard Mater., No. 4, 70–77 (2011).
18. M.N. Safonova, A.A. Fedotov, and A.S. Syromyatnikova, “Research of influence of additives of micro- and ultradispersed powders of natural diamond on properties and structure of bronze-based composites,” Rock Cutting and Metal-Processing Tools–Technique and Technology of its Production,” 16, p. 460-466 (2013).
19. A.I. Grabchenko, I.M. Pyzhov, and V.A. Fedorovich, “Abrasive wheel material,” Ukrainian Useful Model 69459, publ. April 25 (2012).
20. E.A. Levashov, V.V. Kurbatkin, and V.A. Andreev, “Bonding matrix for the manufacture of diamond tools,” Russian Patent 2286241, publ. October 27 (2006), Bulletin No. 5.
21. Yu.V. Naidich, A.A. Bugaev, V.A. Evdokimov, A.A. Adamovsky, V.P. Umansky, M.S. Zyukin, T.B. Konovalenko, Yu. A. Bakardzhiev, E.N. Shnitnikov, and A.I. Rafalsky, “Method of manufacturing the diamond–hard-alloy macrocomposite material,” Ukrainian Patent 85947, publ. March 10 (2009), Bulletin No. 5.
22. I.P. Grushevsky, V.A. Baiunchikov, and V.S. Kabanov, “Method of diamond drilling tool production,” USSR Patent 782958, publ. November 30 (1980), Bulletin No. 44.
23. Y.V. Naidich, P. Volk, and I.A. Lavrinenko, “Impregnation of metallized diamond powders with metallic melt,” Powder Metallurgy, No. 9, 22–25 (1981).
24. V.P. Umanskii, “The impregnation technique of micro- and ultrafine diamond powders in the manufacture of tools,” Ukrainian Patent 120657, publ. January 10 (2020), Bulletin No. 1.
25. Yu.V. Naidich, V.P. Umansky, N.P. Brodnikovsky, A.S. Kulakov, and Ye.A. Rokitskaya, “The influence of the reinforcement from ultradispersed ASM 1/0 diamond powders and molybdenum in the bonding matrix of tubular drills on their performance in processing of some nonmetallic materials,” Adgez. Raspl. Paika Mater., Issue 50, 94–104 (2017).
26. V.P. Umansky, N.P. Brodnikovskiy, O.A. Bashchenko, and Ye.A. Rokitskaya, “The effect of matrix and processed material properties on the performance of diamond drills,” Powder Metall. Met. Ceram., 59, No. 7–8, 477–482 (2020).10.1007/s11106-020-00181-2 ↗