journal article·2019-01Open access

Effects of Nitridation Time and Precursor Particle Size on Yield of β-SiAlON Synthesized from Calcined Kaolinite

Halil Arik, Cengiz Bagci

Powder Metallurgy and Metal Ceramics· Volume 57· Issue 9-10

Abstract

Carbothermal reduction and simultaneous nitriding (CTRN) of natural aluminosilicates is a method used to obtain phases of Si–Al–O–N system. SiAlON phases have important applications, such as high technology ceramics, for wear parts, cutting tools or special purpose refractory materials. In this study carbothermal reduction and nitriding reactions of kaolinite obtained from Balikesir-Duvertepe area of Turkey were studied. The mean particle sizes of kaolinite used for CTRN process were 6.4, 4.67, and 2.29 μm, respectively. The reactions of kaolinite and carbon black mixture carried out at 1400°C for 2, 4, and 8 h. CTRN process was conducted in an atmosphere controlled tube furnace in nitrogen flow of 4 cm3/min. All products were examined by XRD and SEM to determine the transformation, morphology and chemical composition. The results showed that the most of SiAlON transformations occurred at 1400°C for 8 h. It was observed that when decreasing the mean particle size of the starting material the transformation of kaolinite to SiAlON was increased.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Recycling and utilization of industrial and municipal waste in materials production · Glass properties and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. V.N. Antsiferov, V.G. Gilev, V.Ya. Bekker, and I.V. Filimonova, “A study of sialon synthesis from kaolin by carbothermal reduction and simultaneous nitriding,” Refract. Ind. Ceram., 41, Nos. 9–10, 338–344 (2000).10.1023/A:1011372820939 ↗
2. S.A. Suvorov, I.V. Dolgushev, and A.V. Zabolotskii, “Rapid synthesis of finely dispersed sialon powder by carbothermal nitridation of kaolin,” Refract. Ind. Ceram., 43, Nos. 3–4, 113–116 (2002).10.1023/A:1019655128387 ↗
3. K.H. Jack, “Review sialons and related nitrogen ceramics,” J. Mater. Sci., 11, No. 6, 1135–1158 (1976).10.1007/BF02396649 ↗
4. I.J. Davies, T. Minemura, N. Mizutani, M. Aizawa, and K. Itatani, “Sinterability of β-SiAlON powder prepared by carbothermal reduction and simultaneous nitridation of ultrafine powder in the Al2O3–SiO2 system,” J. Mater. Sci., 36, No.1, 165–172 (2001).10.1023/A:1004853423069 ↗
5. Y. Sugahara, K. Kuroda, and C. Kato, “Synthesis of β'-sialon from a montmorillonite-polyacrylonitrile intercalation compound by carbothermal reduction,” J. Amer. Ceram. Soc., 67, No. 11, 247–248 (1984).10.1111/j.1151-2916.1984.tb19499.x ↗
6. H. Mostaghaci, Q. Fan, and F.L. Riley, Y. Bigay, J.-P. Torre, “The development of microstructure in sialon prepared from aluminosilicate minerals,” Brit. Ceram. Trans. J., 85, No. 1, 12–16 (1986).
7. A.D. Mazzoni, and E.F. Aglietti, “Study of carbonitriding reactions of bentonites,” Appl. Clay Sci., 11, Nos. 2–4, 143–154 (1996).10.1016/S0169-1317(96)00024-5 ↗
8. C.J. Spacie, “Preparation sialon ceramics from low cost raw materials”, in: S. Hampshire (ed.), Non-Oxide Technical and Engineering Ceramics, Elsevier Applied Science, London and New York (1986).
9. Z. Hrabe, S. Komarneni and P. Malla, V. Srikanth, and R. Roy, “Pillared montmorillonite clay as a raw material for the synthesis of β'-Sialon,” J. Mater. Sci., 27, No. 17, 4614-4618 (1992).10.1007/BF01165995 ↗
10. H. Yurdakul, R. Ceylantekin, and S. Turan, “A novel approach on the synthesis of β-SiAlON: Eu2+ phosphors from kaolin through carbothermal reduction and nitridation (CRN) route,” Adv. Appl. Ceram., 113, No. 4, 214-222 (2014).10.1179/1743676114Y.0000000141 ↗
11. O.N. Grigor’ev, V.B. Vinokurov, A.D. Panasyuk, N.D. Bega, and V.V. Garbuz, “Synthesis of sialon from kaolin and its phase formation,” Powder Metall. Met. Ceram., 42, Nos. 7–8, 383–387 (2003).10.1023/B:PMMC.0000004158.19602.aa ↗
12. V.B. Vinokurov, O.N. Grigor’ev, N.D. Bega, and L.I. Klimenko, “Effects of mixture components on sialon composition homogeneity on synthesis from kaolins,” Powder Metall. Met. Ceram., 43, Nos. 3–4, 211–217 (2004).10.1023/B:PMMC.0000035713.25465.fb ↗
13. I. Higgins and A. Hendry, “Production of β'-sialon by carbothermal reduction of kaolinite,” Br. Ceram. Trans. J., 85, 161–166 (1986).
14. E. Kokmeijer, C. Scholte, F. Blomer, and R. Metselaar, “The influence of process parameters and starting composition on the carbothermal production of sialon,” J. Mater. Sci., 25, No. 2, 1261-1267 (1990).10.1007/BF00585434 ↗
15. A.D. Mazzoni, and E.F. Aglietti, “Mechanism of the carbonitriding reactions of SiO2-Al2O3 minerals in the Si-Al-O-N system,” Appl. Clay Sci., 12, No. 6, 447-461 (1998).10.1016/S0169-1317(98)00004-0 ↗
16. L.H. Xu, F. Lian, H. Zhang, Y.B. Bi, K. Cheng, and Y.B. Qian, “Optimal design and preparation of beta-SiAlON multiphase materials from natural clay,” Mater. Design, 27, No. 7, 595-600 (2006).10.1016/j.matdes.2004.12.017 ↗
17. C.Y. Chen, G.S. Lan, W.H. Tuan, “Microstructural evolution of mullite during the sintering of kaolin powder compacts,” Ceram. Int., 26, 715-720 (2000).10.1016/S0272-8842(00)00009-2 ↗
18. M.A. Sainz, F.J. Serrano, J.M. Amigo, J. Bastida, and A. Caballero, “XRD microstructural analysis of mullites obtained from kaolinite- alumina mixtures,” J. Eur. Ceram. Soc., 20, No. 4, 403–421 (2000).10.1016/S0955-2219(99)00183-1 ↗
19. J.G. Lee, and I.B. Cutler, “Sinterable sialon powder by reaction of clay with carbon and nitrogen,” Amer. Ceram. Soc. Bull., 58, 869–871 (1979).
20. X.J. Liu, X.W. Sun, J.J. Zhang, X.P. Pu, Q.M. Ge, and L.P. Huang “Fabrication of β-sialon powder from kaolin,” Mater. Res. Bull., 38, No. 15, 1939–1948 (2003).10.1016/j.materresbull.2003.09.018 ↗
21. M. Vlasova, V.B. Vinokurov, O.N. Grigor’ev, A.D. Panasyuk, N.D. Bega, M. Kakazey, J.G. Gonzalez-Rodriguez, G. Dominguez-Patino, and M. Dominguez-Patino, “Features of SiAlON synthesis from kaolin,” Mater. Sci. Eng. A, 366, 325–331 (2004).10.1016/j.msea.2003.08.030 ↗
22. P.K. Panda, L. Mariappan, and T.S. Kannan, “The effect of various reaction parameters on carbothermal reduction of kaolinite,” Ceram. Int., 25, No. 5, 467–473 (1999).10.1016/S0272-8842(98)00060-1 ↗
23. A.W. Weimer, J.R. Cassiday and D.W. Susnitzky, C.K. Black, and D.R. Beamaim “Carbothermal nitridation synthesis of α-Si3N4 powder from pyrolysed rice hulls,” J. Mater. Sci., 31, No. 22, 6005–6013 (1996).10.1007/BF01152152 ↗
24. P.K. Panda, L. Mariappan, T.S. Kannan, “Carbothermal reduction of kaolinite under nitrogen atmosphere,” Ceram. Int. 26, 455-461 (2000).10.1016/S0272-8842(99)00068-1 ↗
25. Z. Tatli, A. Demir, R. Yilmaz, F. Caliskan, A.O. Kurt, “Effects of processing parameters on the production of β-SiAlON powder from kaolinite,” J. Eur. Ceram. Soc., 27, No. 2, 743–747 (2007).10.1016/j.jeurceramsoc.2006.04.062 ↗
26. J.Y. Park, and C.H. Kim, “The α- to β-Si3N4 transformation in the presence of liquid silicon,” J. Mater. Sci., 23, No. 9, 3049-3054 (1988).10.1007/BF00551272 ↗
27. V.K. Sarin, “On the α-to-β phase transformation in silicon nitride,” Mater. Sci. Eng. A, 105-106, 151–159 (1971).10.1016/0025-5416(88)90491-0 ↗
28. K.J.D. Mackenzie, R.H. Meinhold, and G.V. White, Carbothermal formation of β′-sialon from kaolinite and halloysite studied by 29Si and 27Al solid state MAS NMR, J. Mater. Sci., 29, No. 10, 2611–2619 (1994).10.1007/BF00356808 ↗
29. F. Caliskan, “Improvement in sinterability of β-SiAlON produced from kaolin,” J. Alloy Compd., 602, 140–149 (2014).10.1016/j.jallcom.2014.03.016 ↗