journal article·2018-07

Effect of Spark Plasma Sintering on the Structure and Compressive Strength of Porous Nickel

Wei Feng, Qingyuan Wang, Qingquan Kong, Chenghua Sun, Xiaodong Zhu

Powder Metallurgy and Metal Ceramics· Volume 57· Issue 3-4
Publisher page

Abstract

The effect of the temperature and time of spark plasma sintering (SPS) of a nickel powder on the structure of obtained samples of porous nickel was studied, and their mechanical strength under compression was evaluated. Based on the results of the experiments, it was found that spark plasma sintering the nickel powder at a temperature of 480°C with a holding time of 4 minutes enables to obtain samples with a porosity of 78.8%, having a structural performance and a compressive strength exceeding 1 MPa.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. C. Y. Zhao, S. A. Tassou, and T. J. Lu, “Analytical considerations of thermal radiation in cellular metal foams with open cells,” Int. J. Heat Mass Transfer, 51, No. 3, 929–940 (2008).10.1016/j.ijheatmasstransfer.2007.10.010 ↗
2. Y. L. Cao, J. Liu, F. Ji, et al., “Electrodeposited Ni–S intermetallic compound film electrodes for hydrogen evolution reaction in alkaline solutions,” Mater. Letters, 64, No. 3, 261–263 (2010).10.1016/j.matlet.2009.10.056 ↗
3. I. Herraiz-Cardona, E. Ortega, L. Vazquez-Gomez, et al., “Double-template fabrication of three-dimensional porous nickel electrodes for hydrogen evolution reaction,” Int. J. Hydrogen Energy, 37, No. 3, 2147–2156 (2012).10.1016/j.ijhydene.2011.09.155 ↗
4. X. H. Xia, J. P. Tu, X. L. Wang, et al., “Hierarchically porous NiO film grown by chemical bath deposition via a colloidal crystal template as an electrochemical pseudo capacitor material,” J. Mater. Chem., 21, No. 3, 671–679 (2011).10.1039/C0JM02784G ↗
5. K. Liang, X. Z. Tang, W. C. Hu, et al., “High-performance three-dimensional nanoporous NiO film as a supercapacitor electrode,” J. Mater. Chem., 22, No. 22 11062–11067 (2012.10.1039/c2jm31526b ↗
6. A. Vu, Y. Q. Qian, A. Stein, et al., “Porous electrode materials for lithium–ion batteries: How to prepare them and what makes them special,” Adv. Energy Mater., 2, No. 2, 1056–1085 (2012.10.1002/aenm.201200320 ↗
7. H. X. Dong, Y. H. He, Y. Jiang, et al., “Effect of Al content on porous Ni–Al alloys,” Mater. Sci. Eng. A, 528, No. 13, 4849–4855(2011.10.1016/j.msea.2011.02.014 ↗
8. A. Bansiddhi and D. C. Dunand, “Shape-memory NiTi foams produced by replication of NaCl spaceholders,” Acta Biomater., 4, No. 6, 1996–2007 (2008).10.1016/j.actbio.2008.06.005 ↗
9. J. Chen and F. Y. Cheng, “Combination of lightweight elements and nanostructured materials for batteries,” Acc. Chem. Res., 42, No. 5, 713–723 (2009).10.1021/ar800229g ↗
10. M. C. Qiu, L. W. Yang, X. Qi, et al., “Fabrication of ordered NiO coated Si nanowire array films as electrodes for a high-performance lithium–ion battery,” ACS Appl. Mater. Interfaces, 2, No. 12, 3614–3618 (2010.10.1021/am100791z ↗
11. H. P. Yuan, J. G. Li, Q. Shen, et al., “In situ synthesis and sintering of ZrB2 porous ceramics by the spark plasma sintering–reactive synthesis (SPS–RS) method,” Int. J. Refrac. Met. Hard Mater., 34, No. 9, 3–7 (2012.10.1016/j.ijrmhm.2012.01.007 ↗
12. J. Yang, G. Duan, and W. Cai, “Controllable fabrication and tunable magnetism of nickel nanostructured ordered porous arrays,” J. Phys. Chem. C, 113, No. 10, 3973–3977 (2009).10.1021/jp808884e ↗
13. C. Kang, H. F. Lu, S. Yuan, et al., “Superhydrophilicity/superhydrophobicity of nickel micro-arrays fabricated by electroless deposition on an etched porous aluminum template,” Chem. Eng. J., 203, No. 1, 1–8 (2012.10.1016/j.cej.2012.06.128 ↗
14. G. Tong, J. Guan, Z. Xiao, et al., “In situ generated H2 bubble-engaged assembly: A one-step approach for shape-controlled growth of Fe nanostructures,” Chem. Mater., 20, No. 10, 3535–3539 (2008.10.1021/cm800269k ↗
15. U. Dahlborg, C. M. Bao, M. Calvo-Dahlborg, et al., “Structure and microstructure of leached Raney-type Al-Ni powders,” J. Mater. Sci., 44, No. 17, 4653–4660 (2009.10.1007/s10853-009-3712-4 ↗
16. F. Devred, A. H. Gieske, N. Adkins, U. Dahlborg, et al., “Influence of phase composition and particle size of atomized Ni-Al alloy samples on the catalytic performance of Raney-type nickel catalysts,” Appl. Catalysis A: General, 356, No. 7, 154–161 (2009.10.1016/j.apcata.2008.12.039 ↗
17. N. Leventis, N. Chandrasekaran, A. G. Sadekar, et al., “One-pot synthesis of interpenetrating inorganic/organic networks of CuO/resorcinol-formaldehyde aerogels: nanostructured energetic materials,” J. Am. Chem. Soc., 131, No. 13, 4576–4577 (2009.10.1021/ja809746t ↗
18. P. Erri and A. Varma, “Diffusional effects in nickel oxide reduction kinetics,” Ind. Eng. Chem. Res., 48, No. 1, 4–6 (2009).10.1021/ie071588m ↗
19. P. Erri, J. Nader, and A. Varma, “Controlling combustion wave propagation for transition metal/alloy/cermet foam synthesis,” Adv. Mater., 20, No. 7 1243–1245 (2008.10.1002/adma.200701365 ↗
20. Q. Z. Wang, C. X. Cui, S. J. Liu, et al, “Open-celled porous Cu prepared by replication of NaCl spaceholders,” Mater. Sci. Eng.: A, 527, Nos. 4–5, 1275–1278 (2010.10.1016/j.msea.2009.10.062 ↗
21. L. Meng, L. Ying, L. Guangda, et al, “Preparation and dynamic deuterium gas loading of highly porous palladium bulks,” Int. J. Hydr. Energy, 18, No. 32, 5033–5038 (2007).
22. M. Sokol, S. Kalabukhov, M. P. Dariel, et al., „High-pressure spark plasma sintering (SPS) of transparent polycrystalline magnesium aluminate spinel (PMAS),” J. Eur. Ceram. Soc., 34, No. 16, 4305–4310 (2014.10.1016/j.jeurceramsoc.2014.07.022 ↗
23. G. Yang, Y. Du, J. S. Hu, J. C. Zhang, et al, “Preparation of porous-metal nickel,” Dev. Appl. Mater.,14, No. 1, 5–8 (1992.
24. Meng Li, “Preparation of porous nickel bulk catalyst by spark plasma sintering process,” Rare Met. Mater. Eng., 39, No. 10, 1858–1862 (2010).10.1016/S1875-5372(10)60126-9 ↗