journal article·2015-09

Effect of SI Content on Microstructure and Mechanical Properties of the Spray-Formed SiCp/Al–Si Composites

Wei Li, Yunfei Ning, Jian Chen, YouPing Sun, Cong Li

Powder Metallurgy and Metal Ceramics· Volume 54· Issue 5-6
Publisher page

Abstract

The effect of the silicon content on the microstructure and mechanical properties of the SiCp/(1–x)Al–xSi (x = 7, 13, and 20 wt.%) composites, produced by spray deposition, are investigated. The average size of the eutectic Si and primary Si in the composite containing 20% Si (3.44 and 7.85 μm) is higher than that in the composites containing 13% Si (2.51 and 5.85 μm) or 7% Si (1.95 and 0 μm). With increasing in Si content, composites demonstrate an increase in the volume fraction of the primary Si and eutectic Si phases, and a decrease in the average distance between Si and Siphase particle. During tensile tests, the as-sprayed composite with a higher Si content shows an increase in elastic modulus, yield strength, and ultimate tensile strength, but a decrease in elongation. Both SiC particle/matrix debonding and Si decohesion are observed in all three composites, while the primary Si particle cracking is dominant in the composites containing 13 and 20% Si. The fracture reveals an increase in brittleness and in the tendency for the primary Si particles to crack, as the Si content increases.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. R. Kilaas and V. Radmilovic, “Structure determination and structure refinement of Al2CuMg precipitates by quantitative high-resolution electron microscopy,” Ultramicroscopy, 88(1), 63–72 (2001).10.1016/S0304-3991(00)00107-8 ↗
2. H. Nakanishi, K. Kakihara, A. Nakayama, and T. Murayama, “ Effect of reinforcement volume fraction and size distribution on the tribological behavior of Al-composite/brake pad tribo-couple,” Japan Soc. Auto. Eng. Rev., 23, 365–370 (2002).
3. A.R.E. Singer, “The principals of spray-rolling of metals,” Met. Matter., 4, 246–257 (1970).
4. M. R Joyce, C. M Styles, and P.A.S Reed, “Elevated temperature short crack fatigue behaviour in near eutectic Al–Si alloys,” Int. J. Fatigue, 2003, 25, Issues 9–11, 863.10.1016/S0142-1123(03)00157-9 ↗
5. Chen Zhenhua, Teng Jie, Chen Gang, et al., “Effect of the silicon content and thermomechanical treatment on the dry sliding wear behavior of spray-deposited Al–Si/SiCp composites,” Wear, 262, Nos. 3–4, 362–368 (2007).10.1016/j.wear.2006.05.019 ↗
6. A. J. Moffat, S. Barnes, B. G. Mellor, and P. A. S. Reed, “The effect of silicon content on long crack fatigue behaviour of aluminium–silicon piston alloys at elevated temperature,” Int. J. Fatigue, 27, 1564–1570 (2005).10.1016/j.ijfatigue.2005.06.023 ↗
7. M. Lee, W. An, J. H. Kim, et al., “A model study of the artificial linker system using self-assembled calix[4]arene derivative monolayers for protein immobilization,” Mater. Sci. Eng. C, 24, Nos. 1–2, 123–126 (2004).10.1016/j.msec.2003.09.030 ↗
8. N. Chawla, V. V .Ganesh, and B. Wunsch, “Three-dimensional (3D) microstructure visualization and finite element modeling of the mechanical behavior of SiC particle reinforced aluminum composites,” Scripta Mater., 51, No. 2, 161–165 (2004).10.1016/j.scriptamat.2004.03.043 ↗
9. S. Li, L. Sun, S. Fu, and Z. Wang, “An estimation of fracture of SiC particulate affected by aluminum alloy matrix,” Scripta Metall. Mater., 28, No. 7, 869–874 (1993).10.1016/0956-716X(93)90368-3 ↗
10. M. Gupta and M. K. Surappa, “Effect of increase in heterogeneous nucleation sites on the aging behavior of 6061/SiC metal matrix composites,” Mater. Res. Bull., 30, No. 8, 1023–1030 (1995).10.1016/0025-5408(95)00076-3 ↗
11. R. J. Arsenault and M. Taya, “Thermal residual stress in metal matrix composite,” Acta Metall., 35, No. 3, 651–659 (1987).10.1016/0001-6160(87)90188-X ↗
12. N. L. Han, Z. G. Wang, and L. Z. Sun, “Effect of reinforcement size on low cycle fatigue behavior of SiC particle reinforced aluminum matrix composites,” Scripta Metall. Mater., 33, No. 5, 781–787 (1995).10.1016/0956-716X(95)00281-Y ↗