Structuring on sintering in the presence of liquid phase in Cr-Cu-iron group metal systems. I. Cr-Cu system
Source abstract
Abstract
Structuring has been examined for Cr-Cu composites under conditions of impregnation and subsequent liquid-phase sintering at 1200°C in a vacuum of (2–4) · 10−3 Pa with reduced and electrolytic chromium powders. The size distribution for the particles of the refractory component in the microstructure containing the reduced chromium on liquid-phase sintering for 60 min corresponds to a logarithmic normal distribution; the distribution parameters are sensitive to the volume fraction of refractory particles. The calculated values for the dihedral angle are close to one of the modes of the distribution for the dihedral angles in the microstructure for specimens made of electrolytic chromium (115°). At 1200°C, the equilibrium Crs-Cul system obeys the condition \(\frac{{\sigma sl }}{{\sigma ss }} \geqslant 0.5\). This indicates the probability of formation or preservation of framework structure elements during the liquid-phase sintering, which are observed by experiment in specimens containing reduced chromium.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · Iron and Steelmaking Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Paul G. Slade, “Advances in material development for high power vacuum interrupter contacts,” Components, Packaging, and Manufacturing Technology, Part A, 17, No. 1, 96–106 (1994).10.1109/95.296374 ↗
2. G. G. Gnesin (ed.), Sintered Materials for Electrical Engineering and Electronics: A Handbook [in Russian], Metallurgiya, Moscow (1981).
3. V. N. Eremenko (ed.), Physical Chemistry of Inorganic Materials: Handbook in 3_Volumes, Vol. 3 [in Russian], Nauk. Dumka, Kiev (1988).
4. J. K. Beddow, Particle Characterization in Technology: Applications and Microanalysis, Vol. 1, Boca Raton, Florida (2000).
5. K. S. Chernyavskii, Stereology in Metallography [in Russian], Metallurgiya, Moscow (1977).
6. V. I. Nizhenko and L. I. Floka, Surface Tension of Liquid Metals and Alloys: A Handbook [in Russian], Metallurgiya, Moscow (1981).
7. D. M. Skorov, A. I. Dashkovskii, V. I. Maskalets, et al., Surface Energies of Metal Phases [in Russian], Atomizdat, Moscow (1973).
8. S. N. Zadumkin and A. A. Karashaev, “Relationship between surface energies of metals in the solid and liquid states,” in: Surface Phenomena in Liquids and in Solid Phases Arising from Them [in Russian], Kabardino-Balkar. Kn. Izd., Nal’chik (1960).
9. N. D. Lesnik, R. V. Minakova, and E. V. Khomenko, “The chromium-copper system: Adhesion characteristics, alloying, and transition-zone structure in composite materials,” Poroshk. Metall., Nos. 7–8, 137–147 (2001).
10. L. L. Kunin, Surface Phenomena in Metals [in Russian], Metallurgizdat, Moscow (1955).
11. S. A. Saltykov, Stereometric Metallography [in Russian], Metallurgiya, Moscow (1970).