journal article·2009-03

Adhesion of a plastic particle to a substrate upon high-speed collision: a theoretical model

B. A. Uryukov, G. V. Tkachenko

Powder Metallurgy and Metal Ceramics· Volume 48· Issue 3-4
Publisher page

Abstract

A plastic particle will adhere to a substrate after collision if the work of adhesion in the contact area exceeds the elastic rebound energy. The plastic deformation of the particle decreases the elastic strain energy and increases the probability of adhesion. A linear hardening plastic material with constant hardening modulus is used as a model. The particle is modeled by a disk with onedimensional stress distribution. Equations are derived to calculate the minimum speed of impact for the particle to stick to the substrate and the degree of “flattening” of the particle after collision. The model includes no empirical coefficients to be determined in spaying experiments. A new method to describe the effect of dynamic interaction on the activation energy for a topochemical reaction is proposed. It is demonstrated that the nature of plastic deformation changes after the contact stress becomes equal to the hardening modulus. In a high-speed impact, almost all of the kinetic energy is transformed into heat even if the plastic particle does not adhere to the substrate. The calculated results are in agreement with experiments on an aluminum powder deposited by cold spraying onto a copper substrate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Adhesion, Friction, and Surface Interactions · Sports Dynamics and Biomechanics · Granular flow and fluidized beds

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. V. V. Kudinov, Plasma-Sprayed Coatings [in Russian], Nauka, Moscow (1977), p. 184.
2. M. Kh. Shorshorov and Yu. A. Kharlamov, The Physics and Chemistry of Gas Detonation Spraying [in Russian], Nauka, Moscow (1978), p. 224.
3. A. P. Alkhimov, V. F. Kosarev, A. N. Papyrin, et al., New Materials and Technologies, Theory and Practice of Material Hardening in Extreme Conditions [in Russian], Nauka Novosibirsk (1992), pp. 146–167.
4. V. F. Kosarev, The Physics of Cold Gas-Dynamic Spraying [in Russian], Author’s Abstract of DSc Thesis, Novosibirsk (2003), p. 29.
5. N. A. Kil’chevskii, Theory of Impact of Solids [in Russian], Naukova Dumka, Kiev (1969), p. 246.
6. L. D. Landau and E. M. Lifshitz, Theory of Elasticity, Pergamon, New York (1986).
7. L. I. Sedov, Continuum Mechanics [in Russian], Vol. 2, Nauka, Moscow (1973), p. 584.
8. P. M. Vaistukh and V. T. Slepukha, “The role of plastic deformation in plasma spraying,” Fiz. Khim. Obrab. Mater., No. 2, 47–52 (1971).
9. V. P. Lyagushkin, A. A. Mikhal’chenko, P. Yu. Pekshev, and V. A. Seifullin, “Influence of the parameters of particles on the properties of turbulent plasma sprayed coatings,” in: Theoretical and Experimental Problems of Interaction between Particles and a Surface [in Russian], Kiev (1988), pp. 75–83.
10. B. M. Yavorskii and A. A. Detlaf, Handbook of Physicist [in Russian], Nauka, Moscow (1979), p. 942.
11. Yu. A. Kharlamov, Scientific and Technological Fundamentals of Gas Detonation Spraying [in Russian], Author’s Abstract of DSc Thesis, Kiev (1994), p. 33.
12. V. R. Regel’, A. I. Slutsker, and E. E. Tomashevskii, Kinetic Nature of Strength of Solids [in Russian], Nauka, Moscow (1974), pp. 130–138.
13. Yu. L. Krasulin, Interaction of Metal with a Semiconductor in Solid Phase [in Russian], Nauka, Moscow (1971), p. 120.
14. Solid-State Physics: Encyclopedia [in Russian], Vol. 1 and 2, Naukova Dumka, Kiev (1996).
15. Handbook of Chemistry and Physics, Part 2, (1955), p. 1980–1985.
16. K. A. Putilov, “A semiempirical picture of metal structure (A note on the application of thermodynamic similarity),” in: Research on Thermodynamics [in Russian], Nauka, Moscow (1973), pp. 66–87.