Thermodynamic Properties of Tungsten Disulfide from First Principles in Quasi-Harmonic Approximation
Source abstract
Abstract
The standard values (T = 298.15 K) of thermodynamic properties of hexagonal tungsten disulfide 2H-WS2 were calculated from first principles using density functional theory and quasi-harmonic approximation with finite displacements in supercells. Local density approximation was chosen as the exchange-correlation functional and the calculation was performed without Van der Waals corrections. The calculated data are in good agreement, except for the enthalpy of formation, with reliable experimental results, eliminating the discrepancies between the experimental results from different sources and increasing the overall reliability of thermodynamic data for tungsten disulfide. Additionally, the data agreement suggests that greater attention should be paid to experimental studies of the phonon spectrum of 2H-WS2, particularly in the Γ → K region of the low-energy dispersion, where the deviations between the calculation and inelastic neutron scattering are significant. The values of the heat capacity, entropy, and enthalpy of tungsten disulfide are recommended for incorporation into thermodynamic databases and practical application, and the parameters used to calculate these quantities are recommended as initial parameters in firstprinciples studies of the 2H-WS2 properties related to the vibrational spectrum. The calculated value of ∆fH°(2H-WS2, 298.15 K) = –275 ± 0.5 kJ ∙ mole–1 is about 10% below the median of the existing literature data and about 15% below the experimental result accepted as the most reliable. To improve the result, the calculation requires additional attention, for example, by the application of Van der Waals corrections or hybrid approximations to the exchange-correlation functional.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: 2D Materials and Applications · Chalcogenide Semiconductor Thin Films · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. M. Samadi, N. Sarikhani, M. Zirak, H. Zhang, H.-L. Zhang, and A. Z. Moshfegh, “Group 6 transition metal dichalcogenide nanomaterials: synthesis, applications and future perspectives,” Nanoscale Horiz., 3, No. 2, 90–204 (2018).10.1039/C7NH00137A ↗
2. A. Eftekhari, “Tungsten dichalcogenides (WS2, WSe2, and WTe2): materials chemistry and applications,” J. Mater. Chem. A, 5, No. 35, 18299–18325 (2017).10.1039/C7TA04268J ↗
3. P.A. O’Hare, W. Hubbard, G. Johnson, and H. Flotow, “Calorimetric measurements of the low-temperature heat capacity, standard molar enthalpy of formation at 298.15 K, and high-temperature molar enthalpy increments relative to 298.15 K of tungsten disulfide (WS2), and the thermodynamic properties to 1500 K,” J. Chem. Thermodyn., 16, No. 1, 45–59 (1984).10.1016/0021-9614(84)90074-0 ↗
4. V. Muratov, L. Kulikov, N. Kenig, and V. Zakharov, “Thermodynamic properties of nanocrystalline and micron 2H-WS2 powder at low temperatures,” Nanostrukt. Materialoved., No. 1, 3–13 (2008).
5. A. Togo and I. Tanaka, “First principles phonon calculations in materials science,” Scr. Mater., 108, 1–5 (2015).10.1016/j.scriptamat.2015.07.021 ↗
6. P. Vinet, J. H. Rose, J. Ferrante, and J. R. Smith, “Universal features of the equation of state of solids,” J. Phys. Condens. Matter, 1, No. 11, 1941–1963 (1989).10.1088/0953-8984/1/11/002 ↗
7. P. Hohenberg and W. Kohn, “Inhomogeneous electron gas,” Phys. Rev., 136, No. 3B, B864–B871 (1964).10.1103/PhysRev.136.B864 ↗
8. P. Giannozzi, O. Andreussi, T. Brumme, O. Bunau, M. Buongiorno Nardelli, M. Calandra, R. Car, C. Cavazzoni, D. Ceresoli, M. Cococcioni, N. Colonna, I. Carnimeo, A. Dal Corso, S. de Gironcoli, P. Delugas, R.A. DiStasio, A. Ferretti, A. Floris, G. Fratesi, G. Fugallo, R. Gebauer, U. Gerstmann, F. Giustino, T. Gorni, J. Jia, M. Kawamura, H.-Y. Ko, A. Kokalj, E. Küçükbenli, M. Lazzeri, M. Marsili, N. Marzari, F. Mauri, N.L. Nguyen, H.-V. Nguyen, A. Otero-de-la-Roza, L. Paulatto, S. Poncé, D. Rocca, R. Sabatini, B. Santra, M. Schlipf, A.P. Seitsonen, A. Smogunov, I. Timrov, T. Thonhauser, P. Umari, N. Vast, X. Wu, and S. Baroni, “Advanced capabilities for materials modelling with Quantum ESPRESSO,” J. Phys. Condens. Matter, 29, No. 46, 465901 (2017).10.1088/1361-648X/aa8f79 ↗
9. J.P. Perdew and A. Zunger, “Self-interaction correction to density-functional approximations for manyelectron systems,” Phys. Rev. B, 23, No. 10, 5048–5079 (1981).10.1103/PhysRevB.23.5048 ↗
10. A. Molina-Sánchez and L. Wirtz, “Phonons in single-layer and few-layer MoS2 and WS2,” Phys. Rev. B, 84, No. 15, 155413 (2011).10.1103/PhysRevB.84.155413 ↗
11. O.O. Vasiliev, “Thermodynamic properties of hexagonal molybdenum disulfide calculated from first principles,” Powder Metall. Met. Ceram., 58, No. 3–4, 230–236 (2019).10.1007/s11106-019-00068-x ↗
12. H.J. Monkhorst and J.D. Pack, “Special points for Brillouin-zone integrations,” Phys. Rev. B, 13, No. 12, 5188–5192 (1976).10.1103/PhysRevB.13.5188 ↗
13. W.J. Schutte, J.L. De Boer, and F. Jellinek, “Crystal structures of tungsten disulfide and diselenide,” J. Solid State Chem., 70, No. 2, 207–209 (1987).10.1016/0022-4596(87)90057-0 ↗
14. R.W.G. Wyckoff, Crystal Structures, 2nd ed., Interscience Publishers/John Wiley & Sons (1963).
15. C. Sourisseau, M. Fouassier, M. Alba, A. Ghorayeb, and O. Gorochov, “Resonance Raman, inelastic neutron scattering and lattice dynamics studies of 2H-WS2,” Mater. Sci. Eng. B, 3, No. 1–2, 119–123 (1989).10.1016/0921-5107(89)90189-X ↗
16. X. Zhang, X. Zhang, A. Wang, and Z. Huang, “Microstructure and properties of HVOF sprayed Ni-based submicron WS2/CaF2 self-lubricating composite coating,” Trans. Nonferrous Met. Soc. China, 19, No. 1, 85–92 (2009).10.1016/S1003-6326(08)60233-2 ↗