journal article·2018-09

Mixing Enthalpies of Liquid Cu–Hf–Ti Alloys Studied by High-Temperature Calorimetry

P. G. Agraval, M. A. Turchanin, A. A. Vodopyanova, L. A. Dreval

Powder Metallurgy and Metal Ceramics· Volume 57· Issue 5-6
Publisher page

Abstract

The partial enthalpies of mixing of titanium and hafnium in liquid Cu–Hf–Ti alloys were investigated at 1873 K along the xCu/xHf = 3 (at xTi = 0–0.25) and xCu/xTi = 3 (at xHf = 0–0.5) sections by a hightemperature isoperibolic calorimeter. The limiting partial enthalpy of mixing of supercooled liquid titanium in liquid Cu–Hf alloy is 2.0 ± 1.5 kJ/mol. The limiting partial enthalpy of mixing of supercooled liquid hafnium in liquid Cu–Ti alloy is –43.0 ± 4.5 kJ/mol. The integral mixing enthalpies of components along the investigated sections are calculated by integrating the Gibbs–Duhem equation. The integral mixing enthalpy is negative in the investigated composition range. The comparison of our experimental results with the calculations according to Miedema’s model shows that this model’s prediction for the ΔmixH function should be treated with caution.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Metallurgical and Alloy Processes · Thermodynamic and Structural Properties of Metals and Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. A. Inoue, W. Zhang, T. Zhang, et al., “High-strength Cu-based bulk glassy alloys in Cu–Zr–Ti and Cu–Hf–Ti ternary systems,” Acta Mater., 49, No. 14, 2645–2652 (2001).10.1016/S1359-6454(01)00181-1 ↗
2. A. Inoue, W. Zhang, T. Zhang, et al., “Cu-based bulk glassy alloys with high tensile strength of over 2000 MPa,” J. Non-Cryst. Solids, 304, Nos. 1–3, 200–209 (2002).10.1016/S0022-3093(02)01025-6 ↗
3. L. Ma, L. Wang, T. Zhang, and A. Inoue, “Bulk glass formation of Ti–Zr–Hf–Cu–M (M = Fe, Co, Ni) alloys,” Mater. Trans., 43, No. 2, 277–280 (2002).10.2320/matertrans.43.277 ↗
4. C. Qin, K. Asami, T. Zhang, et al., “Effects of additional elements on the glass formation and corrosion behavior of bulk glassy Cu–Hf–Ti alloys,” Mater. Trans., 44, No. 5, 1042–1045 (2003).10.2320/matertrans.44.1042 ↗
5. A. Inoue, W. Zhang, and J. Saida, “Synthesis and fundamental properties of Cu-based bulk glassy alloys in binary and multicomponent systems,” Mater. Trans., 45, No. 4, 1153–1162 (2004).10.2320/matertrans.45.1153 ↗
6. I. A. Figueroa, H. A. Davies, and I. Todd, “Formation of Cu–Hf–Ti bulk metallic glasses,” J. Alloys. Compd., 434, 164–166 (2007).10.1016/j.jallcom.2006.08.181 ↗
7. H. Choi-Yim and R. D. Conner, “Amorphous alloys in the Cu–Hf–Ti system,” J. Alloys Compd., 459, Nos. 1–2, 160–162 (2008).10.1016/j.jallcom.2007.04.264 ↗
8. V. Rontó, E. Nagy, M. Svéda, et al., “Structural and thermal properties of Cu–Hf–Ti bulk amorphous alloys,” J. Phys. Condens. Matter, 144, No. 1, 012054 (2009).
9. M. Kasai, J. Saida, M. Matsushita, et al., “Structure and crystallization of rapidly quenched Cu–(Zr or Hf)–Ti alloys containing nanocrystalline particles,” J. Phys. Condens. Matter, 14, No. 50, 13867 (2002).10.1088/0953-8984/14/50/312 ↗
10. J. Saida, H. Kato, and A. Inoue, “Novel nanostructure and deformation behavior in rapidly quenched Cu–(Zr or Hf)–Ti alloys,” Adv. Eng. Mater., 7, Nos. 1–2, 39–43 (2005).10.1002/adem.200400160 ↗
11. L. C. Damonte, A. F. Pasquevich, L. A. Mendoza-Zélis, et al., “Structural and thermal properties of Cu–Hf–Ti ternary metallic glasses,” Phys. B: Condens. Matter, 398, No. 2, 480–483 (2007).10.1016/j.physb.2007.04.086 ↗
12. J. Basu, B. S. Murty, and S. Ranganathan, “Glass forming ability: Miedema approach to (Zr, Ti, Hf)–(Cu, Ni) binary and ternary alloys,” J. Alloys Compd., 465, Nos. 1–2, 163–172 (2008).10.1016/j.jallcom.2007.10.131 ↗
13. L. A. Dreval, P. G. Agraval, and M. A. Turchanin, “Enthalpy of mixing of liquid Cu–Fe–Zr alloys at 1873 K (1600 °C),” Metall. Mater. Trans., 46B, No. 5, 2234–2245 (2015).10.1007/s11663-015-0383-1 ↗
14. M. A. Turchanin and I. V. Nikolaenko, “Enthalpies of solution of vanadium and chromium in liquid copper by high temperature calorimetry,” J. Alloys Compd., 235, No. 1, 128–132 (1996).10.1016/0925-8388(95)02135-3 ↗
15. P. Agraval, L. Dreval, M. Turchanin, et al., “Enthalpy of mixing of liquid Ni–Ti–Zr alloys at 1873 K,” J. Chem. Thermodyn., 106, 309–316 (2017).10.1016/j.jct.2016.11.008 ↗
16. P. Agraval, M. Turchanin, L. Dreval, et al., “Mixing enthalpy of liquid Cu−Hf−Ni alloys at 1873 K,” J. Therm. Anal. Calorim., 128, 1753–1763 (2017).10.1007/s10973-016-6060-z ↗
17. P. G. Agraval, L. A. Dreval, and M. A. Turchanin, “Enthalpy of mixing of liquid Cu–Fe–Hf alloys at 1873 K,” Int. J. Mater. Res., 107, No. 12, 1121–1128 (2016).10.3139/146.111439 ↗
18. A. T. Dinsdale, “SGTE data for pure elements,” CALPHAD, 15, No. 4, 317–425 (1991).10.1016/0364-5916(91)90030-N ↗
19. M. A. Turchanin, “Calorimetric research on the heat of formation of liquid alloys of copper with group IIIA and group IVA metals,” Powder Metall. Met. Ceram., 36, Nos. 5–6, 253–263 (1997).10.1007/BF02676214 ↗
20. M. A. Turchanin, P. G. Agraval, A. N. Fesenko, et al., “Thermodynamics of liquid alloys and metastable phase transformations in the copper–titanium system,” Powder Metall. Met. Ceram., 44, Nos. 5–6, 259–270 (2005).10.1007/s11106-005-0090-6 ↗