Boriding of Chromium Steels
Source abstract
Abstract
Two boride layers, having different kinds of microstructure, are formed on the surface of industrial chromium steel (13 and 25% Cr) samples during their boriding at 850–950°C and reaction times 3600–43200 sec (1–12 h). In the case of 13% Cr steel, the outer layer bordering boron consists of the FeB phase, whereas the inner adjacent to the solid substrate consists of the Fe2B phase. Each layer is a homogeneous phase. It is a microstructure of the first kind. With 25% Cr steel, each of the boride layers is two-phase. The outer layer comprises the FeB and CrB phases, while the inner the Fe2B and Cr2B phases. It is a microstructure of the second kind. Both boride layers on both steels are characterized by a profound texture. The strongest reflections are {002} and {020} for the FeB phase and {002} for the Fe2B phase. The growth rate of boride layers obeys a parabolic relation. Boride coatings with the microstructure of the second kind exhibit a much higher dry abrasive wear resistance than those with the microstructure of the first kind. The ratio of wear resistance of the outer boride layer on 13% Cr steel to that of the steel base is around 10. For 25% Cr steel, this ratio exceeds 250.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Metal Alloys Wear and Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. L. G. Voroshin and L. S. Lyakhovich, Steel Boriding [in Russian], Metallurgiya, Moscow (1978).
2. K. Holmberg and A. Matthews, Coatings Tribology, Elsevier, Amsterdam (2009).
3. M. Carbucicchio and G. Sambogna, “Influence of chromium on boride coatings produced on iron alloys,” Thin Solid Films, 126, Nos. 3–4, 299–305 (1985).10.1016/0040-6090(85)90324-4 ↗
4. C. M. Brakman, A. W. J. Gommers, and E. I. Mittemeijer, “Boriding of Fe and Fe–C, Fe–Cr, and Fe–Ni alloys. Boride-layer growth kinetics,” J. Mater. Res., 4, No. 6, 1354–1370 (1989).10.1557/JMR.1989.1354 ↗
5. M. Kulka and P. Pertek, “Microstructure and properties of borided 41Cr4 steel after laser surface modification with remelting,” Appl. Surf. Sci., 214, 278–288 (2003).10.1016/S0169-4332(03)00500-2 ↗
6. C. Martini, G. Palombarini, and M. Carbucicchio, “Mechanism of thermochemical growth of iron borides on iron,” J. Mater. Sci., 39, No. 3, 933–937 (2004).10.1023/B:JMSC.0000012924.74578.87 ↗
7. X. Tian, Y. Lu, S. J. Sun, et al., “Effect of boronizing on mechanical properties, wear and corrosion of N80 steel,” Mater. Sci. Technol., 24, No. 3, 314–319(6) (2008).10.1179/174328408X278448 ↗
8. C. K. N. Oliveira, L. C. Casteletti, A. Lombardi Neto, et al., “Production and characterization of boride layers on AISI D2 tool steel,” Vacuum, 84, No. 6, 792–796 (2010).10.1016/j.vacuum.2009.10.038 ↗
9. J. Jiang, Y. Wang, Q. Zhong, et al., “Preparation of Fe2B boride coating on low-carbon steel surfaces and its evaluation of hardness and corrosion resistance,” Surf. Coat. Technol., 206, No. 2–3, 473–478 (2011).10.1016/j.surfcoat.2011.07.053 ↗
10. V. I. Dybkov, Solid State Reaction Kinetics, IPMS Publications, Kyiv (2013): http://www.dybkov.kiev.ua .
11. J. Brandstötter and W. Lengauer, “Multiphase reaction diffusion in transition metal–boron systems,” J. Alloys Compd., 262–263, 390–396 (1997).10.1016/S0925-8388(97)00342-3 ↗
12. V. I. Dybkov, “Growth of boride layers on the 13% Cr steel surface in a mixture of amorphous boron and KBF4,” J. Mater. Sci., 42, No. 16, 6614–6627 (2007).10.1007/s10853-007-1512-2 ↗
13. V. I. Dybkov, V. R. Sidorko, V. G. Khoruzha, et al., “Interaction of 25% chromium steel with boron powder,” Powder Metall. Met. Ceram., 50, No. 7–8, 564–571 (2011).10.1007/s11106-011-9360-7 ↗