journal article·2015-11

High-Temperatures Oxidation of AlN–TiCrB2 Composites. I. Kinetics and Mechanism of Air Oxidation Up to 1600°C

V. A. Lavrenko, V. P. Konoval, A. D. Panasyuk, A. P. Umanskii

Powder Metallurgy and Metal Ceramics· Volume 54· Issue 7-8
Publisher page

Abstract

Thermal gravimetry and differential thermal analysis are employed to study the oxidation resistance of AlN–TiCrB2 materials in air up to 1600°C. The kinetic curves for the materials are parabolic, indicating that oxidation leads to the formation of dense oxide layers preventing oxygen diffusion deep into the samples. With increasing TiCrB2 content of the composite, its oxidation resistance decreases since B2O3 appears in and evaporates from the oxide film, resulting in its partial failure. The oxidation rate constants and activation energies are calculated for different temperature ranges with the Arrhenius equation based on collisions of oxygen molecules on the samples. The data obtained indicate that the oxidation mechanism is dependent on the material composition and temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Thermal properties of materials · Energetic Materials and Combustion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. V. A. Lavrenko and Yu. G. Gogotsi, Corrosion of Structural Ceramics [in Russian], Metallurgiya, Moscow (1989), p. 199.
2. G. V. Samsonov, Nitrides [in Russian], Naukova Dumka, Kiev (1969), p. 379.
3. P. Boch, J. C. Glandus, J. Jarrige, and J. P. Lecompte, “Sintering, oxidation and mechanical properties of hot pressed aluminum nitride,” Ceram. Int., 8, No. 1, 34–40 (1982).10.1016/0272-8842(82)90013-X ↗
4. R. F. Voitovich, Oxidation of Carbides and Nitrides [in Russian], Naukova Dumka, Kiev (1981), p. 192.
5. V. A. Lavrenko and A. F. Alexeev, “Oxidation of sintered aluminum nitride,” Ceram. Int., 9, 80–82 (1983).10.1016/0272-8842(83)90036-6 ↗
6. A. D. Katnani and K. I. Papathomas, “Kinetics and initial stages of oxidation of aluminum nitride: thermogravimetric analysis and X-ray photo-electron spectroscopy study,” J. Vac. Sci. Technol., A5, 1335–1340 (1985).
7. D. Suryanarayana, “Oxidation kinetics of aluminum nitride,” J. Am. Ceram. Soc., 78, 2753–2762 (1995).10.1111/j.1151-2916.1995.tb08051.x ↗
8. Yu. G. Tkachenko, D. Z. Yurchenko, T. V. Dubovik, et al., “High-temperature friction and oxidation of an aluminum nitride base ceramic,” Powder Metall. Met. Ceram., 24, No. 4, 337–339 (1985).10.1007/BF00805236 ↗
9. V. A. Lavrenko, M. Desmaison-Brut, A. D. Panasyuk, and J. Desmaison, “Features of corrosion resistance of AlN–SiC ceramics in air up to 1600 °C,” J. Eur. Ceram. Soc., 18, 2339–2343 (1998).10.1016/S0955-2219(98)00240-4 ↗
10. V. A. Lavrenko, D. J. Baxter, A. D. Panasyuk, and M. Desmaison-Brut, “High-temperature corrosion of AlN-based composite ceramic in air and in combustion products of commercial fuel. Part 1. Corrosion of ceramic composites in the AlN–SiC system in air and in combustion products of kerosene and diesel fuel,” Powder Metall. Met. Ceram., 43, No. 3–4, 179–186 (2004).10.1023/B:PMMC.0000035707.58363.f5 ↗
11. V. A. Lavrenko, D. J. Baxter, A. D. Panasyuk, et al., “High-temperature corrosion of AlN-based composite ceramic in air and in combustion products of commercial fuel. Part 2. Corrosion of ceramic composites in the AlN–SiC–TiB2 system in air and in combustion products of kerosene and diesel fuel,” Powder Metall. Met. Ceram., 43, No. 5–6, 295–304 (2004).10.1023/B:PMMC.0000042466.23104.b9 ↗
12. S. V. Schneider, M. Desmaison-Brut, Y. G. Gogotsi, and J. Desmaison, “Oxidation behavior of a hot isostatically pressed TiB2–AlN composite,” Key Eng. Mater., 113, 49–58 (1996).10.4028/www.scientific.net/KEM.113.49 ↗
13. G. V. Samsonov, L. Ya. Markovskii, A. F. Zhigach, and M. G. Valyashko, Boron and Its Compounds and Alloys [in Russian], Izd. AN USSR, Kiev (1960), p. 590.
14. M. S. Koval’chenko, L. F. Ochkas, and D. Z. Yurchenko, “Wear-resistant hard metals based on the binary titanium–chromium diboride,” Powder Metall. Met. Ceram., 21, No. 11, 876–879 (1982).10.1007/BF00805479 ↗
15. Lijuan Zhou, Yongting Zheng, Shanyi Du, and Hongbo Li, “Oxidation behavior of AlN–SiC–TiB2 ceramics synthesized by SHS–HIP,” J. Alloys Compd., 478, 173–176 (2009).10.1016/j.jallcom.2008.11.090 ↗
16. Hou Xinmei and Chou Kuo-Chih, “Corrosion resistance of AlN–SiC–TiB2 composite in air,” Compos. Sci. Technol., 69, 2527–2531 (2009).10.1016/j.compscitech.2009.07.004 ↗
17. E. M. Sokolovskaya, G. D. Vovchenko, and L. S. Guzei, General Chemistry [in Russian], Izd. Mosk. Univ., Moscow (1980), p. 726.
18. N. M. Emanuel and D. G. Knorre, Chemical Kinetics, Wiley, New York (1973).