Relationship between Erosion and Mechanical Characteristics of Fine-Grained Hard Alloy WC – 16% Co Obtained by Solid-Phase and Liquid-Phase Consolidation. Part 2. Mass Transfer (Cathode Mass Gain and Transfer Coefficient)
Source abstract
Abstract
We investigate the erosion characteristics of hard alloys in spark alloying and their relation to the physical and mechanical properties. The WC – 16% Co alloys used were made by traditional vacuum sintering in the temperature range 950-1350°C or by sintering with subsequent high-energy treatment under pressure at the same temperatures. We show that how efficiently protective hard alloy coatings are formed on the substrate depends in more than one way on the porosity and the bending strength, definitely depends on the cracking resistance of the alloys, but is most clearly related to the resistivity which in turn is determined by the quality of the phase and grain boundaries. In addition, a linear relationship exists between the cathode mass gain, the transfer coefficient, and the erosion of the anode material. We demonstrate experimentally that the erosion resistance of hard alloys is a structure-sensitive characteristic to the extent that the structural factors affect the resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Tunneling and Rock Mechanics · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. G. A. Bovkun and A. V. Laptev, “Relation between the erosion and mechanical characteristics of fine-grained WC–16% Co hard alloy obtained by solid-and liquid-phase consolidation. I. Erosion resistance,” Poroshk. Metall., Nos. 3-4, 25–32 (2003).
2. A. D. Verkhoturov and I. M. Mukha, Technology of Electric-Spark Alloying [in Russian], Kiev (1982).
3. Yu. G. Tkachenko, É. P. Ignatenko, G. A. Bovkun, D. Z. Yurchenko, et al., “Influence of the anode structure on the laws of electric-spark hardening with hard alloys,” Elektron. Obr. Mater., No. 4, 21–24 (1981).
4. I. M. Mukha, A. D. Verkhoturov, and S. V. Gnedova, “Alloying electrode materials based on WC–Co hard alloys with boron microadditives,” Elektron. Obr. Mater., No. 4, 24 (1981).
5. A. D. Verkhoturov, I. A. Podchernyaeva, L. F. Pryadko, and F. F. Egorov, Electrode Materials for Electric-Spark Alloying [in Russian], Nauka, Moscow (1988).
6. A. D. Verkhoturov, S. N. Kirilenko, and V. T. Bondar', “Study of the process of electric-spark alloying of steels with WC–Co hard alloys,” Poroshk. Metall., No. 8, 67–71 (1980).
7. S. S. Gorelik, V. P. Elyutin, E. I. Mozzhykhin, et al., “X-ray analysis of recrystallization processes of titanium, zirconium, and molybdenum borides and titanium and tungsten carbides,” Izv. Uchebnykh Zaved., Tsvet. Metall., No. 4, 143–148 (1980).
8. I. N. Chaporova and K. S. Chernyavskii, Structure of Sintered Hard Alloys [in Russian], Metallurgiya, Moscow (1975).
9. G. A. Bovkun, M. S. Kovalchenko, A. V. Laptev, and Yu. G. Tkachenko, “Development of electrode WC-based materials for wear-resistant spark coating,” Advances in Hard Materials Production (November 8-10, 1999, Turin, Italy), Turin (1999), pp. 533–538.
10. Gille G., Szesny B., Dreyer K., et al., “Submicron and ultrafine grained hard metal for microdrills and metal cutting insert,” Proc. 15th Int. Plansee Seminar (May 31-June 4, 2001, Reutte, Tirol), Reutte, Tirol (2001), Vol. 2, pp. 782–816.
11. A. V. Laptev, S. S. Ponomarev, and L. F. Ochkas, “Solid-phase consolidation of fine-grained WC–16% Co hard metal,” J. Adv. Mat., 33, No. 3, 42–51 (2001).