journal article·2013-03

Prospects of Improving the Tribotechnical Characteristics of Titanium Composites

A. G. Kostornov, O. I. Fushchich, T. M. Chevychelova, V. T. Varchenko, A. D. Kostenko

Powder Metallurgy and Metal Ceramics· Volume 51· Issue 11-12
Publisher page

Abstract

Titanium-based composites containing MoS2, MoSe2, CaF2, and BN solid lubricants are synthesized. Their tribological characteristics are investigated without lubrication at different sliding velocities (0.5, 1, 2, 4, 6, and 15 m/sec) and low pressures (0.27, 0.54, 0.8, 1.1, 1.35, 1.47, and 2.7 MPa) in air. In view of the high friction coefficient and large wear, the composite materials cannot be proposed as antifriction ones for operation at small sliding velocities and low pressures. The titanium-based composites are promising as antifriction materials at an increased sliding velocity (15 m/sec) and low pressures when their friction coefficients range from 0.3 to 0.36 and wear ranges from 1.91 to 68.3 mg/km. In dry friction at a high sliding velocity in air, the temperature of their working surface increases resulting from the formation of titanium oxides and then a dense secondary lubricating microheterogeneous film. The composition and structure of the secondary films differ from those of the starting materials and determine their antifriction properties and friction performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Tribology and Wear Analysis · Metal and Thin Film Mechanics · Surface Treatment and Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (8)

Show source-provided references
1. G. I. Kapyrin, Titanium Alloys in Mechanical Engineering [in Russian], Mashinostroenie, Leningrad (1977), p. 248.
2. I. S. Katyug and V. I. Svitsikov, “Some friction and wear tests of titanium and its alloys,” Sudostroenie, No. 8, 46–48 (1958).
3. I. D. Radomysel’skii, S. V. Titarenko, A. M. Petrova, and V. V. Polotai, “Friction and wear of sintered titanium materials,” Powder Metall. Met. Ceram., 16, No. 6, 464–469 (1977).10.1007/BF00790802 ↗
4. I. M. Fedorchenko and L. I. Pugina, Sintered Composite Antifriction Materials [in Russian], Naukova Dumka, Kiev (1980), p. 440.
5. V. N. Miroshnikov and Yu. F. Shevchuk, “Choice of solid lubricants,” Powder Metall. Met. Ceram., 10, No. 11, 911–915 (1971).10.1007/BF00794007 ↗
6. A. G. Kostornov, O. I. Fushchich, V. F. Gorban’, et al., “Dependence of antifriction properties of self-lubricating copper-based composite on the elastoplastic characteristics of tribosynthesis region,” Powder Metall. Met. Ceram., 47, No. 11–12, 674–679 (2008).10.1007/s11106-009-9077-z ↗
7. Antifriction Powder Materials. Method of Determining Tribotechnical Properties. GOST 26614–85 [in Russian], Gosstandart, Moscow (1985), p. 9.
8. G. V. Samsonov, Nitrides [in Russian], Naukova Dumka, Kiev (1969), p. 380.