Ultrafine high-cobalt VK40 hard alloy. I. Structure and properties
Source abstract
Abstract
Ultrafine WC-41 wt.% Co powders (VK40) are densified under 1000–1200 MPa at 950–1250 °C and in 0.13 Pa vacuum. It is examined how the pressing temperature and annealing at 1190 °C influence the density, structure, physical and mechanical properties of VK40 alloy. It is shown that high-pressure sintering produces dense samples with ultrafine structure (LWC = 0.35–0.45 µm) and low degree of contact for carbide particles (contiguity CWC = 0.08–0.1) in solid phase. The highest mechanical properties are exhibited by samples densified at 1150–1250 °C or by samples annealed after preliminary pressing at 1050–1150 °C. The alloy has the following properties: transverse rupture strength (TRS) of 3200–3400 MPa, fracture toughness of 25–33 MPa · m1/2, Vickers hardness of 7.5–7.7 GPa under 300 N, compressive strength of 2600–2800 MPa, compressive offset yield stress σ0.2 = 2200–2400 MPa, compressive plastic strain of 6.5–7.0%, and fracture energy of 180–200 MJ/m3. These mechanical properties of ultrafine VK40 alloy differ from those of standard impact-resistant coarse-grained hard metals in higher TRS, fracture toughness, and yield stress.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Orthopaedic implants and arthroplasty · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. M. F. Bazhenov, S. G. Baichman, and D. G. Karpachev, Hard Alloys: Handbook [in Russian], Metallurgiya, Moscow (1978), p. 184.
2. V. S. Samoilov, É. F. Éikhmans, V. A. Fal’kovskii, et al., Metal-Working Hard-Alloys Tools: Handbook [in Russian], Mashinostroenie (1988), p. 368.
3. V. A. Fal’kovskii, Hard Alloys for Pressing [in Russian], NIIMash, Moscow (1978), p. 44.
4. V. S. Ryzhevanov, A. N. Blinkov, A. V. Abramov, et al., “Assessment of the service durability of sintered hard WC-Co alloys under cyclic impacts,” in: Research into Creation and Application of Hard Alloys (Collected Scientific Papers) [in Russian], VNIITS, Metallurgiya, Moscow (1987), pp. 114–118.
5. V. A. Ivensen, Z. A. Gol’dberg, O. N. Éiduk, and V. A. Fal’kovskii, “The breaking strength of a hard alloy under impact loads,” Powder Metall. Met. Ceram., 4, No. 12, 1015–1017 (1965).10.1007/BF00775450 ↗
6. G. G. Travushkin, N. F. Koval’skaya, and V. A. Fal’kovskii, “Research into breaking of hard WC-Co alloys intended for impact loads,” in: Hard Alloys (Collected Scientific Papers) [in Russian], VNIITS, No. 20, 75–79 (1979).
7. I. N. Chaporova and K. S. Chernyavskii, Structure of Hard Sintered Alloys [in Russian], Metallurgiya, Moscow (1975), p. 248.
8. M. M. Babich, Carbon-Content Inhomogeneity of Hard Alloys and Its Elimination [in Russian], Naukova Dumka, Kiev (1975), p. 174.
9. A. V. Laptev, A. I. Tolochin, and L. F. Ochkas, “Hard alloy WC-24%Ni obtained in the solid phase from ultrafine WC, NiO, and C powders. Part 1. Density and structure of specimens,” Powder Metall. Met. Ceram., 43, No. 11–12, 614–623 (2003).10.1023/B:PMMC.0000022202.03079.39 ↗
10. A. I. Tolochin and A. V. Laptev, “Structure and properties of WC-36Co composite produced from ultrafine mixtures of WC + Co and WC + Co3O4 powders,” Sverkhtverd. Mater., No. 6, 37–46 (2006).
11. V. I. Tret’akov, Fundamentals of Materials Science and Production Technology of Hard Sintered Alloys [in Russian], Metallurgiya, Moscow (1976), p. 528.
12. E. A. Pamfilov, V. S. Ryzhevanov, T. A. Livshits, et al., “Performance of hard alloys in cutting and punching of turbonit and glass fiber plastic with hard-alloy punches using high-speed press,” Kuzn. Shtamp. Proizv., No. 1, 22–24 (1985).
13. G. G. Travushkin, K. S. Chernyavskii, V. A. Fal’kovskii, and N. F. Koval’skaya, “Experimental study of structural nucleation in samples of hard WC-20% Co alloys under uniaxial compression,” Probl. Prochn., No. 7, 95–97 (1977).
14. V. A. Fal’kovskii, M. V. Kuralina, G. G. Travushkin, and Yu. E. Tyablikov, “Contact fatigue in low-cycle loading of hard WC-Co alloys intended for metal working process,” Probl. Prochn., No. 8, 39–42 (1985).