Effect of abrasive particle sizes on abrasive wear of ceramic coatings sprayed by plasma process
Source abstract
Abstract
This study examines the effects of abrasive grain size on abrasive wear behaviors on surfaces coated with different types of ceramics. To this end, the surface of AISI 1040 steel is coated with the ceramic materials of 5% SiO2–3% TiO2–92% Cr2O3, 60% Al2O3–40% TiO2, pure Al2O3 and 87% Al2O3–13% TiO2 using the plasma method. Following the coating process, the abrasive wear resistance of each sample is tested by the ring-on-disc method. 80–220 mesh SiC abrasive paper is used as abrasive. The best wear resistance is obtained with the ceramic coating containing 92% Cr2O3, which is followed by pure Al2O3 and 87% Al2O3–13% TiO2, respectively. The lowest wear resistance is observed in 60% Al2O3–40% TiO2 ceramic coating. Wear resistance of the samples increases with increasing hardness value and decreasing abrasive grain size. It is observed that wear mechanisms occurring on the samples’ wear surfaces change with changing abrasive grain size. Wear mechanisms such as microscratching, microcracking, and plastic deformation are observed in the samples.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. O. Sarikaya, “Effect of the substrate temperature on properties of plasma sprayed Al2O3 coatings,” Materials and Design., 26, 53–57 (2005).10.1016/j.matdes.2004.04.005 ↗
2. M. E. Woods and I. Oda, PSZ Ceramic for Adiabatic Engine Components, SAE International Congress, Michigan (1982).10.4271/820429 ↗
3. M. Hocking and V. Vasantasree, “Metallic and ceramic coatings,” in: Production High Temperature and Applications, Longman Scientific and Technical Publishers, London (1989), pp. 24–26.
4. C. Öner, H. Hazar, and M. Nursoy, “Surface properties of CrN coated engine cylinders,” Materials and Design., 30, 914–920 (2009).10.1016/j.matdes.2008.05.018 ↗
5. C. Friedrich, G. Berg, E. Z. Bras, et al., “PVD Cr x N coatings for tribology application on piston rings,” Surf. Coat. Technol., 97, 661–668 (1997).10.1016/S0257-8972(97)00335-6 ↗
6. W. Grzesik, “Wear development on wiper Al2O3–TiC mixed ceramic tools in hard machining of high strength steel,” Wear, 266, 1021–1028 (2009).10.1016/j.wear.2009.02.010 ↗
7. K. Venkateswarlu, V. Rajinikanth, T. Naveen, et al., “Abrasive wear behavior of thermally sprayed diamond reinforced composite coating deposited with both oxy-acetylene and HVOF techniques.” Wear, 266 (2009).10.1016/j.wear.2009.02.001 ↗
8. X. Pang, K. Gao, F. Luo, et al., “Investigation of microstructure and mechanical properties of multi-layer Cr/Cr2O3 coatings,” Thin Solid Films, 517, 1922–1927 (2009).10.1016/j.tsf.2008.10.026 ↗
9. M. Fallqvist, M. Olsson, and S. Ruppi, “Abrasive wear of texture-controlled CVD α-Al2O3 coatings,” Surf. Coat. Technol., 202, 837–843 (2007).10.1016/j.surfcoat.2007.06.063 ↗
10. P. H. Shipway and J. J. Hogg, “Wear of bulk ceramics in micro-scale abrasion – The role of abrasive shape and hardness and its relevance to testing of ceramic coatings,” Wear, 263, 887–895 (2007).10.1016/j.wear.2006.11.028 ↗
11. Fundamentals of Friction and Wear of Materials: Papers Presented at the 1980 ASM Materials Science Seminar (4–5 October 1980, Pittsburgh, Pennsylvania), D. A. Rigney (Ed.), ASM International, Materials Park, OH (1981).
12. T. Zhaohe, D. Chuanxian, and Y. Dongsheng, “A fracture model for wear mechanism in plasma sprayed ceramic coating materials,” Wear., 155, 309 (1992).10.1016/0043-1648(92)90090-U ↗
13. Friction, Lubrication, and Wear Technology: ASM Handbook, Vol. 18, ASM International, Materials Park, OH (2004), pp. 101–117.
14. L. Pawlowsky, The Science and Engineering of Thermal Spray Coatings, John Wiley & Sons, New York (1995).
15. H. K. Kang, “Development of a cathode layer (La0.8Sr0.2MnO3) in a solid Oxide fuel cell using a reactive plasma spray,” Met. Mater. Int., 10, 479 (2004).10.1007/BF03027352 ↗
16. C. Meric, S. Sahin, B. Backir, and N. S. Koksal, “Investigation of the boronizing effect on the abrasive wear behaviour in cast irons,” Materials and Design., 27, 751–757 (2006).10.1016/j.matdes.2005.01.018 ↗
17. O. P. Modi, D. P. Mondal, B. K. Prasad, et al., “Abrasive wear behaviour of a high carbon steel: effects of microstructure and experimental parameters and correlation with mechanical properties,” Mater. Sci. Eng. A., 343, 235–242 (2003).10.1016/S0921-5093(02)00384-2 ↗
18. K. H. Zum Gahr, Microstructure and wear of materials, Elsevier, New York (1987), p. 304.
19. T. Zhaohe, D. Chuanxian, and Y. Dongsheng, Wear, 155, 309 (1992).10.1016/0043-1648(92)90090-U ↗
20. C. Martini, G. Palombarini, G. Poli, and D. Prandstraller, “Sliding and abrasive wear behaviour of boride coatings,” Wear, 256, 608–613 (2004).10.1016/j.wear.2003.10.003 ↗
21. B. Venkataraman and G. Sundararajan, “The high speed sliding wear behaviour of boronied medium carbon steel,” Surf. Coat. Technol., 73, 177--184 (1995).10.1016/0257-8972(94)02379-4 ↗
22. H. Sin, N. Saka, and P. Suh, “Abrasive wear mechanisms and the grit size effect,” Wear, 55,163 (1979).10.1016/0043-1648(79)90188-1 ↗
23. M. H. Korkut and M. S. Gok, “Abrasive wear characteristics of coating area of low carbon steel surface alloyed through tungsten inert gas welding process,” Surface Engineering, 25, No. 7, 517–525 (2009).10.1179/026708408X356821 ↗
24. M. H. Korkut, V. Koc, and M. S. Gök, “Abrasive wear behaviour of sintered composite austenitic stainless steels having γ-Fe and M23C6 phases,” Tribology⎯Materials, Surfaces & Interfaces, 1, No. 3, 124–130 (2007).10.1179/175158408X273621 ↗
25. J. Goddard and H. Wilman, “A theory of friction and wear during the abrasion of metals,” Wear, 5, No. 2, 114–135 (1962).10.1016/0043-1648(62)90235-1 ↗