journal article·2009-05

Diffusion processes and structurization in microwave sintering of BaTiO3–SrTiO3 and Al2O3–Cr2O3 powder systems with complete miscibility

O. I. Get’man, V. V. Panichkina, P. Ya. Radchenko, V. V. Skorokhod, M. G. Andreeva, A. G. Eremeev, V. V. Kholoptsev

Powder Metallurgy and Metal Ceramics· Volume 48· Issue 5-6
Publisher page

Abstract

The paper examines the compaction and structurization of equimolar BaTiO 3 -SrTiO 3 and Al 2 O 3 -Cr 2 O 3 powder mixtures with complete miscibility and monophase Al 2 O 3 and Cr 2 O 3 powders under microwave heating (24 and 30 GHz) (MWH) and conventional heating (CH). A gyrotron system is used for MWH and electric furnaces for CH. The samples are prepared by sintering of ultrafine powder mixtures at 1000-1300°C (MWH) and 1700°C (CH). Mercury porometry is used to determine the mean pore size and specific surface area of the samples. The Barus-Bechgold method is employed to find the maximum pore contraction. A quantitative microscopic analysis of the samples is carried out. The content of solid solution is determined using x-ray analysis. The volume and local shrinkage is calculated. Relationships between the local and volume shrinkage, pore structure parameters, and amounts of solid solutions for different heating conditions are shown. The results reveal different diffusion processes in sintering of powder systems with complete miscibility of components under MWH and CH.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microwave-Assisted Synthesis and Applications · Microwave Dielectric Ceramics Synthesis · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. K. I. Rybakov and V. E. Semenov, “Mass transport in ionic crystals induced by the ponderomotive action of a high-frequency electric field,” Phys. Rev. B, 52, 3030 (1995).10.1103/PhysRevB.52.3030 ↗
2. M. A. Janney et al., “Enhanced diffusion in sapphire during microwave heating,” J. Mater. Sci., 32, 1347–1355 (1997).10.1023/A:1018568909719 ↗
3. K. I. Rybakov, V. E. Semenov, J. H. Booske, et al., “Dynamics of microwave induced currents in ionic crystals,” Phys. Rev. B, 55, 3559–3567 (1997).10.1103/PhysRevB.55.3559 ↗
4. M. D. Romero, J. M. Gomez, G. Ovejero, and A. Rodríguez, “Synthesis of LSX zeolite by microwave heating,” Mat. Research Bul., 39, 389–400 (2004).10.1016/j.materresbull.2003.10.018 ↗
5. M. Cirakoglu, W. A. Prisbrey, et al., “Microwave synthesis of calcium tungstate,” in: Proc. 2nd World Cong. Microwave and Radio Frequency Processing, Westerville (1999), 173–180.
6. T. Kimura, H. Takizawa, K. Uheda, et al., “Microwave synthesis of yttrium iron garnet powder,” J. Am. Ceram. Soc., 81, No. 11, 2961–2964 (1998).10.1111/j.1151-2916.1998.tb02720.x ↗
7. K. Uematsua, K. Toda, and M. Sato, “Preparation of YVO4: Eu3+ phosphor using microwave heating method,” J. All. Comp., 408, No. 12, 860–863 (2006).10.1016/j.jallcom.2005.01.081 ↗
8. E. Pert, Yu. Carmel, A. Birnboim, et al., “Temperature measurements during MW processing: The significance of thermocouple effects,” J. Am. Ceram. Soc., 84, 1981–1986 (2001).10.1111/j.1151-2916.2001.tb00946.x ↗
9. K.-H. Felgner, T. Muller, H. T. Langhammer, and H.-P. Abicht, “On the formation of BaTiO3 from BaCO3 and TiO2 by microwave and conventional heating,” Mat. Lett., 58, 1943–1947 (2004).10.1016/j.matlet.2003.11.037 ↗
10. H. Liu, L. Guo, L. Zou, et al., “Theoretical and experimental study on solid chemical reaction between BaCO3 and TiO2 in microwave field,” Mat. Sci. Eng., B 113, 161–165 (2004).10.1016/j.mseb.2004.07.082 ↗
11. O. I. Getman, V. V. Panichkina, V. V. Holoptsev, et al., “Diffusion Processes in Ba–Sr–Titanate system under microwave heating,” Key Eng. Mat., 206–213, 389 (2002).
12. Yu. Bykov, A. Eremeev, M. Glyavin, et al., “24–84 GHz gyrotron systems for technological microwave applications,” IEEE Transactions on Plasma Sci., 32, No. 1, 67–72 (2004).10.1109/TPS.2004.823904 ↗
13. V. V. Skorokhod and Yu. M. Solonin, “Relationship between integral and local densification in the sintering of porous solids,” Powder Metall. Met. Ceram., No. 12, 985–989 (1983).
14. S. Gopalan and A. V. Virkar, “Interdiffusion and Kirkendall effect in doped barium titanate–strontium titanate diffusion couples,” J. Am. Ceram. Soc., 78, 993–998 (1995).10.1111/j.1151-2916.1995.tb08427.x ↗
15. R. K. Roeder and E. B. Slamovich, “Stoichiometry control and phase selection in hydrothermal derived BaxSr1–xTiO3 powders,” J. Am. Ceram. Soc., 82, 1665–1675 (1999).10.1111/j.1151-2916.1999.tb01984.x ↗
16. L. R. Rossi and W. G. Lawrence, “Elastic properties of oxide solid solutions: The system Al2O3–Cr2O3,” J. Am. Ceram. Soc., 53, No. 11, 604–608 (1970).10.1111/j.1151-2916.1970.tb15982.x ↗