Characterization of Alumina–Molybdenum Composites Prepared by Gel Casting Method
Source abstract
Abstract
This work concerns the study of ceramic-metal composite materials processed by gel casting method. Due to limited possibilities of fabrication complex-shape elements obtained by classical methods of powder metallurgy (such as isostatic or uniaxial pressing) the colloidal processes are recently willingly applied in manufacturing of ceramic matrix composites. In the present work Al2O3–10 vol.% Mo composites were formed by aqueous gel casting process and sintered in argon atmosphere. Selected physical properties and phase composition have been described. The microstructure of the green and sintered samples was examined with a scanning electron microscope. Molybdenum particles were homogeneously distributed in the ceramic matrix. Moreover, Mo2C was formed during sintering process that had a positive contribution to enhancing the hardness of the composite. The composite after sintering was characterized by a density higher than 95% of theoretical density and high hardness. The performed studies have confirmed the possibility of application of gel casting method to produce Al2O3–Mo composite system.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. J.S. Moya, S. Lopez-Esteban, and C. Pecharroma’n, “The challenge of ceramic/metal microcomposites and nanocomposites,” Prog. Mater. Sci., 52, No. 7, 1017–1090 (2007).10.1016/j.pmatsci.2006.09.003 ↗
2. S. Tanaka, S. Goi, and Z. Kato, “Influence of granule characteristics on fabrication of translucent alumina ceramics with high strength and reliability,” J. Ceram. Soc. Jpn, 124, No. 4, 426–431 (2016).10.2109/jcersj2.15271 ↗
3. H.M. Irshad, B.A. Ahmed, M.A. Ehsan, T.I. Khan, T. Laoui, M.R. Yousaf, A. Ibrahim, and A.S. Hakeem, “Investigation of the structural and mechanical properties of micro-/nano-sized Al2O3 and cBN composites prepared by spark plasma sintering,” Ceram. Inter.,43, No. 14, 10645–10653 (2017).10.1016/j.ceramint.2017.05.325 ↗
4. T. Hottaa, H. Abeb, M. Naitob, M. Takahashic, K. Uematsud, and Z. Kato, “Effect of coarse particles on the strength of alumina made by slip casting,” Powder Technol., 149, Nos. 2–3, 106–111 (2005).10.1016/j.powtec.2004.11.004 ↗
5. P. Bednarek, M. Szafran, Y. Sakka, and T. Mizerski, “Gelcasting of alumina with a new monomer synthesized from glucose,” J. Eur. Ceram. Soc., 30, No. 8, 1795–1801 (2010).10.1016/j.jeurceramsoc.2010.01.036 ↗
6. A. Miazga, K. Konopka, M. Gizowska, and M. Szafran, “Preparation of Al2O3–Ni cermet composites by aqueous gelcasting,” Powder Metall. Met. Ceram., 52, Nos. 9–10, 567–571 (2014).10.1007/s11106-014-9561-y ↗
7. M. Haji, T. Ebadzadeh, M.H. Amin, M. Kazemzad, and T. Talebi, “Gelcasting of Al2O3/Ag nanocomposite using water-soluble solid-salt precursor,” Ceram. Inter., 38, 867–870 (2012).10.1016/j.ceramint.2011.06.062 ↗
8. T. Gibas, Korund i jego zastosowanie w technice, Wydawnictwo Slask, Katowice (1970), p. 434.
9. G. Pezzotti, H. Suenobu, T. Nishida, and O. Sbaizero, “Measurement of microscopic bridging stresses in an Alumina/Molybdenum composite by in situ fluorescence spectroscopy,” J. Am. Ceram. Soc., 82, No. 5, 1257–1262 (1999).10.1111/j.1151-2916.1999.tb01904.x ↗
10. Y. Su, L. Hu, H. Fan, J. Song, and Y. Zhang, “Surface engineering design of alumina/molybdenum fibrous monolithic ceramic to achieve continuous lubrication from room temperature to 800°C,” Tribol. Lett., 65, No. 2, 47–55 (2017).
11. J. Zygmuntowicz, A. Baczyńska, A. Miazga, W. Kaszuwara, and K. Konopka, “Al2O3–Mo functionally graded material obtained via centrifugal slip casting,” Ceram. Mater., 69, No. 2, 73–77 (2017).
12. K. Broniszewski, J. Wozniak, K. Czechowski, L. Jaworska, and A. Olszyna, “Al2O3–Mo cutting tools for machining hardened stainless steel,” Wear, 303, Nos. 1–2, 87–91 (2013).10.1016/j.wear.2013.03.002 ↗
13. O.O. Omatete, M.A. Janney, and S.D. Nunn, “Gelcasting: From laboratory development toward industrial production”, J. Eur. Ceram. Soc., 17, Nos. 2–3, 407–413 (1997).10.1016/S0955-2219(96)00147-1 ↗
14. A. Krell and P. Blank, “The influence of shaping method on the grain size dependence of strength in dense submicrometre alumina,” J. Eur. Ceram. Soc., 16, No. 11, 1189–1200 (1996).10.1016/0955-2219(96)00044-1 ↗
15. J. Yang, J. Yu, and Y. Huang, “Recent developments in gelcasting of ceramics,” J. Eur. Ceram. Soc., 31, No. 14, 2569–2591 (2011).10.1016/j.jeurceramsoc.2010.12.035 ↗
16. A. Idzkowska, P. Wiecinska, and M. Szafran, “Acryloyl derivative of glycerol in fabrication of zirconia ceramics by polymerization in situ,” Ceram. Int., 40, No. 8, 13289–13298 (2014).10.1016/j.ceramint.2014.05.039 ↗
17. C. Tallon, R. Moreno, M.I. Nieto, D. Jach, G. Rokicki, and M. Szafran, “Gelcasting performance of alumina aqueous suspensions with glycerol monoacrylate: a new low-toxicity acrylic monomer,” J. Am. Ceram. Soc., 90, No. 5, 1386–1393 (2007).10.1111/j.1551-2916.2007.01556.x ↗
18. V.A. Bhanu and K. Kishore, “Role of oxygen in polymerization reactions,” Chem. Rev., 91, No. 2, 99–117 (1991).10.1021/cr00002a001 ↗
19. J. Zygmuntowicz, P. Wiecinska, A. Miazga, K. Konopka, M. Szafran, and W. Kaszuwara, “Thermoanalytical studies of the ceramic-metal composites obtained by gel-centrifugal casting,” J. Therm. Anal. Calorim.,133, No. 1, 303–312 (2017).10.1007/s10973-017-6647-z ↗
20. T. Wejrzanowski, R. Pielaszek, A. Opalinska, H. Matysiak, W. Lojkowski, and K.J. Kurzydlowski, “Quantitative methods for nanopowders characterization”, Appl. Surf. Sci., 253, No. 1, 204–208 (2006), https://doi.org/10.1016/j.apsusc.2006.05.089.10.1016/j.apsusc.2006.05.089 ↗
21. Y. Ma, G. Guan, X. Hao, J. Cao, and A. Abudula, “Molybdenum carbide as alternative catalyst for hydrogen production – A review,” Renew. Sust. Energ. Rev., 75, 1101–1129 (2017).10.1016/j.rser.2016.11.092 ↗