Structural Features and Properties of Alloy 84% WC ― 16% Co, Obtained by Hot Pressing in the Solid and Liquid Phases. Part 2. Influence of the Temperature at which the Specimens are Made on Their Physicomechanical Properties
Source abstract
Abstract
We have studied the changes that occur in the resistivity, the transverse bending strength, and the fracture toughness (cracking resistance) of a hard alloy obtained by hot pressing at about 500 MPa and sintering over a wide range of temperatures (950-1450°C) as well as the how those parameters are affected by solid-phase and liquid-phase annealing. The porosity dependence of the resistivity is shown not to be single-valued. Other factors affect the resistivity, e.g., the degree of particle interaction and the state of the structural components, which vary with the porosity. The resistivity curve for hot-pressed specimens has an inflection in the region of 1200°C. The resistivity increases at a faster rate at lower temperatures. In the temperature range studied the porosity dependence of the transverse bending strength and the fracture toughness is linear: σb = σ0 b(1 − 3.53Θ) and K 1c = K 0 1c (1 − 3.44Θ). Prolonged solid-phase annealing of hot-pressed specimens improves their mechanical properties owing to a decrease in porosity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Powder Metallurgy Techniques and Materials · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. A. V. Laptev, S. S. Ponomarev, and L. F. Ochkas, “Structural features and properties of the alloy 84% WC —16% Co obtained by solid-phase and liquid-phase hot pressing. I. Influence of the temperature at which the specimens are made on their porosity and structure,” Poroshk. Metall., Nos. 11-12, 103-116 (2000).
2. V. V. Skorokhod, “Theory of the physical properties of porous materials and composites and the principles of controlling their microstructure in technological processes,” Poroshk. Metall., Nos. 1-2, 53-71 (1995).10.1007/BF00559852 ↗
3. J. L. Chermant and F. Osterstock, “Fracture toughness and fracture of WC —Co composites,” J. Mat. Sci., 11, No. 12, 1939-1951 (1976).10.1007/BF00708272 ↗
4. V. Ya. Pines and A. F. Sirenko, “Some laws governing the mechanical strength in bodies obtained by sintering powder materials,” Zh. Tekh. Fiz., 26, No. 9, 2076-2085 (1956)
5. J. J. Majagi and G. S. Upadhaya, “Sintering of WC —10% Co hard metal containing superalloy,” J. Refract. Met. Hard. Mat., 8, No.2, 232-235 (1989).
6. I. R. Picken and I. Gurland, “The fracture toughness of WC —Co alloys measured on single-edge notched beam specimens precracked by electron discharge machining,” Mat. Sci. Eng., 33, 135-142 (1978).10.1016/0025-5416(78)90164-7 ↗
7. L. N. Devin and V. V. Romanenko, “On the determination of the fracture toughness of composites based on a hard alloy,” Sverkhtverd. Mater., No. 6, 15-19 (1980).
8. I. Qvick, P.-O. Snell, and T. Lundstrom, “The influence of porosity, carbon content and grain size on some mechanical properties of WC —10% Co alloys,” Scand. J. Met., 14, No. 2, 69-79 (1985).
9. A. Nordgren and A. Melander, “Influence of porosity of strength WC —10% Co cemented carbide,” Powder Met., 31, No. 3, 189-200 (1988).10.1179/pom.1988.31.3.189 ↗
10. U. Engel and H. Hübner, “Strength improvement of cemented carbides by hot isostatic pressing (HIP),” J. Mater. Sci., 13, No. 9, 2003-2012 (1978).10.1007/BF00552908 ↗
11. F. G. Larson, J. Hong, R. Goodson, and M. Voytek, “Hot isostatic pressing of cemented carbides,” J. Refract. Met. Hard Mater., No. 3, 30-34 (1984).
12. A. A. Sotnik, A. D. Vasil'ev, and I. G. Slys', “Influence of porosity on the fracture toughness of brittle powder materials,” in: Electron Microscopy and Strength of Materials [in Russian], Institute for Problems of Materials Science, National Academy of Sciences of Ukraine, Kiev (1989), pp. 34-40.
13. L. A. Simpson, “Effect of microstructure on measurement of fracture energy of Al2O3,” J. Amer. Ceram. Soc., 56, No. 1, 7-11 (1973).10.1111/j.1151-2916.1973.tb12340.x ↗
14. M. Yu. Bal'shin, Scientific Fundamentals of Powder Metallurgy and Fiber Metallurgy [in Russian], Metallurgiya, Moscow (1972).
15. M. G. Loshak, Strength and Durability of Hard Alloys [in Russian], Nauk. Dumka, Kiev (1984).