journal article·2007-09

Al-Fe-Ce alloys based on water-atomized powders for high-temperature applications

O. D. Neikov, Yu. V. Mil’man, A. I. Sirko, A. V. Samelyuk, A. V. Krainikov, N. A. Efimov

Powder Metallurgy and Metal Ceramics· Volume 46· Issue 9-10
Publisher page

Abstract

The microstructure and mechanical properties of Al-Fe-Ce alloys based on water-atomized powders between 20 and 300 °C are examined in comparison with the properties of similar alloys produced by other rapid crystallization techniques. Changes in atomization parameters vary both the cooling rate (from 104 to 106 K/sec) and powder size distribution (from 5 to 100 µm). The excellent compactability of water-atomized powders facilitates powder consolidation, which is based on hot extrusion and cold pressing of degassed powders. The mechanical properties are examined by tensile tests. The ultimate tensile strength is 500 to 550 MPa at 20 °C and 270 to 300 MPa at 300 °C at adequate plasticity. The properties achieved are comparable with those of similar alloys known from the literature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Aluminum Alloys Composites Properties · Metallurgy and Material Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. A. Unal, D. D. Leon, T. B. Gurganus, and G. J. Hildeman, “Production of aluminum and aluminum-alloy powder,” in: Powder Metal Technology and Applications: ASM Handbook, Vol. 7, ASM International Publishers (1998), pp. 148–159.
2. O. D. Neikov, G. I. Vasilieva, A. V. Sameljuk, and A. V. Krajnikov, “Water atomized aluminum alloy powders,” Mater. Sci. Eng. A, 383, 7–13 (2004).10.1016/j.msea.2004.02.030 ↗
3. O. D. Neikov, Yu. V. Milman, D. B. Miracle, et al., “Properties of rapidly solidified powder aluminum alloys for elevated temperatures produced by water atomization,” in: V. Arnhold, C.-L. Chu, W. Jandeska Jr., and H. Sanderow (ed.), Advances in Powder Metallurgy and Particulate Materials, Vol. 7, Metal Powder Industries Federation, Princeton, New Jersey (2002), pp. 14–27.
4. O. D. Neikov, “Non-ferrous powder production technologies,” in: International Powder Metallurgy Directory & Yearbook, Vol. 1, MPR Publishing Services Ltd, Shrewsbury, UK (2004–2005), pp. 21–29.
5. O. D. Neikov, “Water atomized powder technologies for advanced aluminum alloy production,” in: Proc. 2000 Powder Metallurgy World Cong., K. Kosuge and H. Nagai (ed.), Japan Society of Powder and Powder Metallurgy and Japan Powder Metallurgy Association, Kyoto (2000), pp. 464–467.
6. O. D. Neikov, A. V. Krajnikov, A. V. Sameljuk, et al., “An experimental study of water atomization of aluminum powders,” in: Proc. 2002 World Congr. of Metal Powder Ind. Fed., Vol. 3, Princeton, NJ (2002), pp. 74–85.
7. B. I. Bondarev and Yu. V. Shmakov, Process for Producing Rapidly Solidified Aluminum Alloys [in Russian], Vseross. Inst. Legk. Splavov, Moscow (1997).
8. V. I. Dobatkin, V. I. Elagin, and V. M. Fedorov, Rapidly Solidified Aluminum Alloys [in Russian], Vseross. Inst. Legk. Splavov, Moscow (1995).
9. G. I. Éskin, “Nondendritic crystallization of light alloys,” Tekhnol. Legk. Splavov, No. 2, 17–25 (2000).
10. A. F. Belov and V. S. Zolotarevskii, “Microstructure and phase composition of Al-Ce-Fe-Ni-Zr cast alloys,” Ros. Khim. Zh., 45, No. 5–6, 15–22 (2001).
11. T. Kaji, T. Tokuoka, and T. Nishioka, “High toughness and heat-resistant RS PM aluminum alloy using new alloy design technique,” in: 2004 Powder Metallurgy World Congr., Vol. 1, European Powder Metallurgy Association, Bellstone Shrewsbury, UK (2004), pp. 431–436.
12. J. R Davies (ed.), ASM Specialty Handbook: Aluminum and Aluminum Alloys, ASM International, Matals Park (1993), pp. 275–289.
13. J. C. Foley, W. H. Jr. Hunt, D. J. Barnard, and F. C. Laabs, “Simple powder metallurgy processing of Al-8Fe-4Ce alloys,” in: V. Arnhold, C.-L. Chu, W. Jr. Jandeska, and H. Sanderow (ed.), Advances in Powder Metallurgy and Particulate Materials, Vol. 1, Metal Powder Industries Federation, Princeton, New Jersey (2002), pp. 103–114.
14. G. J. Hildeman and R. E. Jr. Sanders, “Aluminum powder alloy product for light temperature application,” Patent 4,379,719, USA (1982).
15. M. Kubota, M. Suganate, and J. Kaneko, “P/M materials of rapidly solidified Al-Ce-X ternary alloys,” J. Jap. Inst. Light Metals, 43, 509–515 (1993).10.2464/jilm.43.509 ↗
16. D. Y. Lee and D. E. Zupon, “High temperature performance of dispersion strengthened P/M aluminum alloys,” in: Dispersion Strengthened Aluminium Alloys, Y.-W. Kim (ed.), TMS, Warrendale, PA (1988), pp. 265–281.