Formation of a Tribofilm in the Surface Layer of Al–Ti–Cr–N–B Magnetron Coating on Boron Nitride During Turning of Hardened Steel
Source abstract
Abstract
The effect of cutting ShKh15 hardened steel on the element and phase composition of the surface layer of the coating deposited on the cBN-based tool is studied. The microstructure and oxidation kinetics of the surface layer of the AlN–Ti(Cr)B 2 magnetron coating are investigated during both formation and turning. The coating is formed by HF magnetron sputtering of an AlN–Ti(Cr)B 2 target. The formation of a two-layer tribofilm with a nanosize outer layer is examined. The phase composition of the tribofilm is determined using layer-by-layer Auger analysis. Its outer nanosize layer is a glass-like phase in the form of limited solid solutions based on Al 2 O 3 oxides and playing a role of solid lubricant. As the cutting speed is increased, the wear rate for the coated tool decreases compared with the uncoated tool.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Boron and Carbon Nanomaterials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. C. Donnet and A. Erdemir, “Historical developments and new trends in tribological and solid lubricant coatings,” Surf. Coat. Technol., 180–181, 76–84 (2007).
2. R. Franz and C. Mitterer, “Vanadium containing self-adaptive low-friction hard coatings for high-temperature applications: a review,” Surf. Coat. Technol., 228, No. 7, 1–13 (2013).10.1016/j.surfcoat.2013.04.034 ↗
3. H. Kato and K. Komai, “Tribofilm formation and mild wear by tribo-sintering of nanometer-sized oxide particles on rubbing steel surfaces,” Wear, 262, Nos. 1–2, 36–41 (2007).10.1016/j.wear.2006.03.046 ↗
4. G. K. Dosbaeva, S. C. Veldhuis, K. Yamamoto, et al., “Oxide scales formation in nano-crystalline TiAlCrSiYN PVD coatings at elevated temperature,” Int. J. Refract. Met. Hard Mater., 28, No. 1, 133–141 (2010).10.1016/j.ijrmhm.2009.09.003 ↗
5. M. P. Bezhenar, Scientific Fundamentals for High-Pressure Sintering of CBN Composites [in Ukrainian], Abstract of PhD Thesis, Kiev (2002), p. 36.
6. N. V. Novikov and S. A. Klimenko (eds.), Superhard Materials: Production and Application [in Russian], Vol. 5, Ins. Sverkhtv. Mater. NAS Ukraine, Inzh. Prom. Tsentr ALKON, (2006), p. 316.
7. M. Yu. Kopeikina, S. A. Klimenko, Yu. A. Melniichuk, and V. M. Beresnev, “Efficiency of cutting tool fitted with CBN-based polycrystalline superhard materials with vacuum-plasma coating,” Superhard Materials, 5, 87–97 (2008).
8. E. Soroka, B. Lyashenko, S. Qiao, and C. Zhang, “Tribological behavior and cutting performance of PVD-TiN coating/substrate system with discontinuous surface architecture,” Rare Met. Mater. Eng., 40, No. 4, 580–584 (2011).10.1016/S1875-5372(11)60028-3 ↗
9. S. N. Grigoriev, “Methods of depositing wear-resistant nano-coatings in tool manufacture,” Metall. Mashinostr., No. 1, 37–43 (2011).
10. Ye. N. Reshetnyak and V. Ye. Strel’nitskii, “Synthesis of reinforcing nanostructured coatings,” Vopr. Atom. Nauki Techn. Ser. Fiz. Rad. Povr. Rad. Merialoved., 92, No. 2, 119–130 (2008).
11. A. Voevodin and J. Zabinski, “Supertough wear-resistant coatings with “chameleon” surface adaptation,” Thin Sol. Film, 370, 223–231 (2000).10.1016/S0040-6090(00)00917-2 ↗
12. F. Barthelma, H. Frank, P. Mahr, and S. Reich, “Oxygen-improved hard coatings for high performance cutting processes,” Procedia CIRP, 1, 208–213 (2012).10.1016/j.procir.2012.04.036 ↗
13. A. D. Panasyuk, I. A. Podchernyaeva, N. S. Boltovest, et al., “Structure and properties of thin ceramic coatings in the system AlN–(TiCr)B2,” Powder Metall. Met. Ceram., 45, Nos. 5–6, 244–250, (2006).10.1007/s11106-006-0071-4 ↗
14. V. M. Beresnev, M. Yu. Kopeikina, and S. A. Klimenko, “Multi-component and multi-layer vacuum-arc coatings for cutting tool,” Vopr. Atom. Nauki Techn. Ser. Vak. Chist. Mater. Sverchprovod., 17, No. 1, 152–158 (2008).
15. I. A. Podchernyaeva, A. I. Dokhota, V. M. Panashenko, et al., “Kinetics and fretting corrosion of spark and laser-spark ZrB2-containing coatings based on VT3-1 alloy,” Probl. Tribol., 63, No. 1, 62–71 (2012).
16. I. A. Podchernyaeva, A. D. Panasyuk, and V. M. Panashenko, “Formation of the secondary structure on ZrB2-containing laser-spark coating based on titanium alloy during wear by loose abrasive,” Dokl. NAS Ukrainy, No. 9, 109–113 (2009).
17. V. O. Lavrenko, A. D. Panasyuk, O. M. Grigoriev, et al., “High-temperature (to 1600°C) oxidation of ZrB2–MoSi2 ceramics in air,” Powder Metall. Met. Ceram., 51, Nos. 1–2, 102–107 (2012).10.1007/s11106-012-9403-8 ↗
18. N. V. Boshitskaya, I. A. Podchernyaeva, V. A. Lavrenko, et al., “Combined functional biocoatings on the VT-6 alloy,” Powder Metall. Met. Ceram., 52, Nos. 9–10, 551–559 (2013).
19. V. O. Lavrenko, V. A. Shvets, B. M. Talash, et al., “Electrochemical oxidation of ZrB2–MoSi2 in a 3% NaCl solution,” Powder Metall. Met. Ceram., 50, Nos. 11–12, 749–753 (2012).10.1007/s11106-012-9385-6 ↗
20. A. S. Berezhnoi, Oxides: Multicomponent Systems, Naukova Dumka, Kiev (1970), p. 542.
21. Ye. K. Solovykh, Scientific and Methodological Fundamentals for Improving the Load Bearing of Functional Coatings by Structural and Technological Methods [in Ukrainian], Abstract of PhD Thesis, Kiev (2013), p. 36.