journal article·2001-03

Sintering of Si3N4 Ceramics with Additives Containing Yttrium and Ytterbium Oxides with Microwave and Traditional Heating

Olga I. Get'man, Valentina V. Panichkina, Valerii V. Skorokhod

Powder Metallurgy and Metal Ceramics· Volume 40· Issue 3-4
Publisher page

Abstract

Compaction processes, phase transformation, and porous structure evolution are compared for materials based on silicon nitride containing yttrium and ytterbium oxides under microwave and traditional heating conditions. Experiments by microwave heating are performed in a special gyrotron device operating at a frequency of 30 GHz in a nitrogen atmosphere at normal pressure with a constant heating rate of 30, 60, and 90 deg/min. Traditional sintering is carried out in a tubular continuous furnace with a tungsten muffle in a nitrogen atmosphere at normal pressure with a heating rate of 60 deg/min. It is established that under microwave heating conditions compaction of the test materials and the start of the α →β phase transformation occur at temperatures 100-150 deg lower than those typical for traditional heating. In material with a reduced amount of oxide additives compaction is accompanied by an increase in the proportion of large pores which is the reason for a slow-down in compaction both with traditional heating and with microwave one. It is suggested that the reason for acceleration of mass transfer with microwave heating is the specific nature of the interaction of the microwave field with the liquid phase formed, promoting development of non-diffusion transfer of solid-phase elements dissolved within it and the mechanical effect on its particles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microwave-Assisted Synthesis and Applications · Advanced ceramic materials synthesis · Material Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. W. H. Sutton, “Microwave processing of ceramics an overview,” in: Microwave Processing of Materials III: Mater. Res. Soc. Symp. Proc., R. L. Beatty, W. H. Sutton, and M. F. Iskander (eds.), Pittsburgh, PA (1992), Vol. 296, pp. 3-20.10.1557/PROC-269-3 ↗
2. J. D. Katz, “Microwave sintering of ceramics,” Ann. Rev. Mater. Sci., Paolo-Alto, CA (1992), Vol. 22, pp. 153-170.10.1146/annurev.ms.22.080192.001101 ↗
3. T. N. Tiegs, J. O. Kiggans, and H. G. Kimrey, “Microwave processing of silicon nitride,” in: Microwave Processing of Materials II: Mater. Res. Soc. Symp. Proc., W. D. Snyder, W. H. Sutton, M. F. Iskander, and D. L. Johnson (eds.), Pittsburgh (1990), Vol. 189, pp. 267-272.10.1557/PROC-189-267 ↗
4. M. Hirota, M. E. Britto, K. Hirao, et al., “Microwave sintering of silicon nitride with rare earth sesquioxode additions,” in: Microwaves: Theory and Application in Materials Processing IV: Ceramic Transactions, D. E. Clark, W. H. Sutton, and D. A. Lewis (eds.), American Ceramic Society, Westerville, OH (1997), Vol. 80, pp. 515-522.
5. T. Ueno, Y. Makino, S. Miyake, et al., 3rd Int. Nano Ceramic Forum and 2nd Int. Symp. on Intermaterials (NCF 3 and IMA'99), Seoul (1999), pp. 146-152.
6. Yu. Bykov, A. Eremeev, V. Flyugin, et al., “The gyrotron system for ceramics sintering,” in: Microwaves: Theory and Application in Materials Processing III: Ceramic Transactions, D. E. Clark, D. F. Folz, S. J. Oda, and R. Silberglitt (eds.), American Ceramic Society, Westerville, OH (1995), Vol. 59, pp. 133-140.
7. C. P. Gazarra and D. R. Messier, “Determination of phase content of Si3N4 by X-ray diffraction analysis,” Ceram. Bull., 56, 777-780 (1977).
8. V. V. Skorokhod, Yu. M. Solonin, and I. V. Uvarova, Chemical, Diffusion and Rheological Processes in Powder Metallurgy [in Russian], Kiev (1990).
9. W. D. Kingery, Introduction to Ceramics, Wiley, New York (1976).
10. V. V. Panichkina, M. M. Sirotyuk, and V. V. Skorokhod, “Liquid-phase sintering of fine tungsten-copper powder mixtures,” Poroshk. Metall., No. 6, 27-31 (1982).
11. T. N. Tiegs, J. O. Kiggans, H. D. Lin, and C. A. Wilkens, “Comparison of properties of sintered and reactionbonded silicon nitride fabricated by microwave and conventional heating,” in: Microwave Processing of Materials IV: Mater. Res. Soc. Symp. Proc., M. F. Iskander, R. J. Louth, and W. H. Sutton (eds.), Pittsburgh (1994), Vol. 347, pp. 501-506.10.2172/110731 ↗
12. Kim Yoon Ch., Koh Sang Ch., Kim Do K, and Kim Chong H, “Effect of microwave heating on the sintering of silicon nitride-doped with Al2O3 and Y2O3,” Microwaves: Theory and Application in Materials Processing III: Ceramic Transactions, D. E. Clark, D. F. Folz, S. J. Oda, and R. Silberglitt (eds.), American Ceramic Society, Westerville, OH (1995), Vol. 59, pp. 415-422.
13. D. R. Clarke and W. W. Ho, “Effect of intergranular phases on the high-frequency dielectric losses of silicon nitride ceramics,” in: Advances in Ceramics, Additives and Interfaces in Electron Ceramics, M. F. Yan and A. N. Hener (eds.), American Ceramic Society, Columbus, OH (1983), Vol. 7, pp. 246-252.
14. Yu. Bykov, A. Eremeev, and V. Kholoptsev, “Comparative study of Si3N4-based ceramics sintering ate frequencies of 30 and 83 GHz,” Microwave Processing of Materials V: Mater. Res. Soc. Symp. Proc., M. F. Iskander, J. O. Kiggans, and J-Ch. Bolomey (eds.), Pittsburgh, PA (1996), Vol. 430, pp. 613-618.10.1557/PROC-430-613 ↗
15. N. A. Toropov, V. P. Barzakovskii, et al., Phase Diagrams for Silicate Systems [in Russian], Nauka (1972).
16. V. V. Skorokhod, I. D. Fridberg, and V. V. Panichkina, “Effect of the level of microstructural regularity of a powder porous body on its compaction during sintering,” Poroshk. Metall., No. 9, 15-21 (1985).
17. V. V. Skorokhod, “Rapid rate sintering of dispersed systems: theory, processing and problems,” Poroshk. Metall., Nos. 7-8, 30-39 (1999).