journal article·2014-03

Porous Materials from Titanium Powders: Past, Present, and Future

V. V. Savich

Powder Metallurgy and Metal Ceramics· Volume 52· Issue 11-12
Publisher page

Abstract

Literature overview and our own results are used to identify the most promising areas of research in the field of titanium porous powder materials (PPMs). The search for possible ways of further reduction in PPM cost is a relevant area. It includes not only the use of sponge titanium powder and titanium sponge as the feedstock but also titanium hydride powder and, in the long term, enriched rutile concentrate. The development of new methods to increase PPM mechanical strength, such as microalloying, use of bisized feedstock, etc., has a great resource-saving potential. Advantages of developing new processes to form and consolidate PPMs from titanium powders are described, including: formation of a gradient porous structure by spark plasma, electric-discharge, selective laser, and microwave sintering and microinjection molding; modification of physicochemical and biochemical properties of PPM pore surface to change functional characteristics; creation of composite PPMs containing isotropically distributed target components such as activators, sorbents, reinforcing additives, etc. It is important to develop PPMs with anisotropic structural properties across the thickness and (or) the area of the porous element distributing a flow of gas or liquid.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Bone Tissue Engineering Materials · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. A. A. Il’in, B. A. Kolachev, and I. S. Pol’kin, Titanium Alloys. Composition, Structure and Properties [in Russian], VILS-MATI, Moscow (2009), p. 520.
2. B. A. Kolachev, I. S. Pol’kin, and V. D. Talalaev, Titanium Alloys of Different Countries [in Russian], Vseros. Inst. Legk. Splav., Moscow (2000), p. 316.
3. Application of Titanium in Aviation, Shipbuilding, and Military Industries [in Russian], www.ProTown.ru/information/hide/5615.html .
4. Applications of Titanium, www.titaniuminfogroup.co.uk/about-titanium .
5. H. Fujii, K. Takahashi, and Y. Yamashita, “Application of titanium and its alloys for automobile parts,” Nippon Steel Tech. Rep., No. 88, 70–75 (2003).
6. W. Petty, Total Joint Replacement, W. B. Sauders Inc., Philadelphia (1991), p. 814.
7. V. V. Savich, M. G. Kiselev, and A. I. Voronovich, Modern Materials for Surgical Implants and Instruments [in Russian], 2nd ed., DoctorDesign Ltd, Minsk (2004), p. 104.
8. S. G. Glazunov and K. M. Belotserkovskaya, Powder Metallurgy of Titanium Alloys [in Russian], Metallurgiya, Moscow (1989), p. 136.
9. Glazunov Sergei: 100th Anniversary of Birth [in Russian], Vseros. Inst. Aviat. Mater., Moscow (2008), p. 22.
10. E. P. Babenko and O. M. Shapovalova, Problems of High-Temperature Equipment [in Russian], ISBN 978-617-518-213-0 (2012).
11. Metal Materials and Metallurgy. Granules of Titanium and Nickel Alloys [in Russian], kompozit-mv.ru/index.php/ru/metallicheskie-materialy-i-metallurgicheskie-tekhnologii/35-granyly-iz-titanovykh-i-nikelevykh-splavov.
12. P. A. Vityaz’, V. M. Kaptsevich, and V. K. Sheleg, Porous Powder Materials and Associated Products [in Russian], Vysheishaya Shkola, Minsk (1987), p. 164.
13. V. K. Sorokin, “Studying the compaction of titanium powders during pressing,” in: Powder Metallurgy [in Russian], Inst. Tekh. Inf., Riga (1968), pp. 110–113.
14. G. F. Tikhonov and V. K. Sorokin, “Preparation of porous titanium by rolling powder,” Powder Metall. Met. Ceram., 8, No. 2, 167–169 (1969).10.1007/BF00774830 ↗
15. V. K. Sorokin, “Compatibility of stainless steel and titanium powders,” Powder Metall. Met. Ceram., 13, No. 11, 944–946 (1974).10.1007/BF00803202 ↗
16. D. S. Arensburger, V. S. Pugin, and I. M. Fedorchenko, “Properties of electrolytic and reduced titanium powders and sinterability of porous compacts from such powders,” Powder Metall. Met. Ceram., 7, No. 5, 362–367 (1968).10.1007/BF00774529 ↗
17. D. S. Arensburger, V. S. Pugin, and A. A. Gatushkin, “Sintered titanium filters,” Powder Metall. Met. Ceram., 8, No. 10, 849–854 (1969).10.1007/BF00778349 ↗
18. D. S. Arensburger, “Sinterability of titanium powder,” Powder Metall. Met. Ceram., 9, No. 2, 113–116 (1970).10.1007/BF00802143 ↗
19. D. S. Arensburger, V. S. Pugin, and I. M. Fedorchenko, “Manufacture and properties of porous titanium–molybdenum alloy materials,” Powder Metall. Met. Ceram., 9, No. 12, 986–989 (1970).10.1007/BF00805068 ↗
20. V. V. Shcherbina, L. I. Zhivov, V. A. Pavlov, et al., “Production technology and properties of large-sized titanium filters,” Powder Metall. Met. Ceram., 12, No. 6, 470–473 (1973).10.1007/BF00797084 ↗
21. V. A. Pavlov, V. V. Shcherbina, V. P. Tokarev, and V. M. Litvin, “Processes suitable for the manufacture of parts from titanium powders,” Powder Metall. Met. Ceram., 13, No. 5, 380–383 (1974).10.1007/BF00796428 ↗
22. V. A. Pavlov and V. G. Zhurchenko, “Mechanical and hydraulic characteristics of P/M titanium filters,” Powder Metall. Met. Ceram., 21, No. 7, 541–545 (1982).10.1007/BF00802571 ↗
23. V. S. Ustinov, Yu. G. Olesov, L. N. Antipin, and V. A. Drozdenko, Powder Metallurgy of Titanium [in Russian], Metallurgiya, Moscow (1973), p. 248.
24. A. G. Kostornov, L. G. Galstyan, S. A. Mnatsakanyan, and S. M. Agayan, “The hydraulic characteristics of titanium-based porous powder materials,” Powder Metall. Met. Ceram., 25, No. 8, 654–657 (1986).10.1007/BF00796734 ↗
25. A. G. Kostornov, L. G. Galstyan, S. A. Mnatsakanyan, and S. M. Agayan, “The physicomechanical properties of porous titanium base powder materials,” Powder Metall. Met. Ceram., 25, No. 11, 909–911 (1986).10.1007/BF00795323 ↗
26. V. G. Khromov, “Effect of aluminum and tin on the sintering of porous titanium,” Powder Metall. Met. Ceram., 18, No. 1, 16–19 (1979).10.1007/BF00791884 ↗
27. H.-P. Buchkremer, “Manufacturing and characterization of low density titanium parts,” in: Proc. 1998 Powder Metallurgy World Congress & Exhibition (October 18–22, 1998), Granada, Spain (1998), Vol. 5, 189–194.
28. M. Bram, H.-P. Buchkremer, A. Laptev, and D. Stoever, “Scaling-up of powder metallurgical production of highly porous metals to industrial quantities,” in: Cellular Metals and Metal Foaming Technology, MIT-Verlag (2001), pp. 215–220.
29. S. M. Solonin, N. P. Sleptsova, and L. I. Chernyshev, “Determination of pore size of filter materials from nonspherical powders,” Powder Metall. Met. Ceram., 10, No. 1, 30–34 (1971).10.1007/BF00798043 ↗
30. V. V. Skorokhod, S. M. Solonin, and L. I. Chernyshev, “Mechanism of the sintering of high-porosity materials in the presence of a volatile pore-forming agent,” Powder Metall. Met. Ceram., 13, No. 11, 889–893 (1974).10.1007/BF00803191 ↗
31. V. S. Pugin, M. Sh. Goldberg, V. A. Kutnyak, et al., “Application of titanium powders for gas atomization,” in: Powder Metallurgy [in Russian], Izd. Perm. Univ., Perm (1977), pp. 96–100.
32. L. E. Lunin, V. E. Sheremet, A. G. Kostornov, and N. V. Sleptsova, “Structure of a porous material from a metal powder milled and mixed together with a pore-forming agent,” Powder Metall. Met. Ceram., 22, No. 4, 255–257 (1983).10.1007/BF00795595 ↗
33. A. G. Kostornov, L. E. Lunin, N. E. Fedorova, et al., “Densification behavior of mixtures of metal powders with a pore-forming agent,” Powder Metall. Met. Ceram., 22, No. 6, 428–431 (1983).10.1007/BF00793215 ↗
34. A. Ya. Fastovskaya, N. P. Sleptsova, P. A. Korzhenko, et al., “Sintered titanium filters for the purification of injection solutions,” Powder Metall. Met. Ceram., 10, No. 9, 748–750 (1971).10.1007/BF00791854 ↗
35. L. I. Chernyshev, “Analysis of the hydraulic properties of permeable materials with bimodal porosity,” Powder Metall. Met. Ceram., 44, No. 3–4, 129–136 (2005).10.1007/s11106-005-0070-x ↗
36. S. G. Glazunov and K. K. Yasinskii, “New process of producing spherical granules from titanium and its alloys,” in: Powder Metallurgy [in Russian], Izd. Perm. Univ., Perm (1977), pp. 57–58.
37. P. A. Vityaz’, V. M. Katsevich, V. K. Sheleg, et al., “The properties of porous materials of titanium powders,” Powder Metall. Met. Ceram., 26, No. 2, 154–156 (1987).10.1007/BF00794136 ↗
38. P. A. Vityaz’, V. M. Kaptsevich, A. G. Kostornov, et al., Structure and Properties of Porous Powder Materials [in Russian], Metallurgiya, Moscow (1993), p. 240.
39. P. A. Vityaz’ (ed.), L. P. Pilinevich, V. V. Mazyuk, et al., Porous Powder Materials with Anisotropic Structure: Production Methods [in Russian], Tonpik, Minsk (2005), p. 236.
40. M. P. Anashenko, S. A. Bedenko, L. P. Pilinevich, et al., “Application of porous disks from sintered titanium powder for water ozonation,” Voda, No. 6, 6–7 (1998).
41. M. P. Anaschenko, S. A. Bedenko, L. P. Pilinevich, et al., “Porous ozone disperser from sintered powder of technically pure titanium,” in: Proc. 1998 Powder Metallurgy World Congress & Exhibition (October 18–22, 1998), Granada, Spain (1998), Vol. 5, pp. 253–258.
42. V. N. Antsiferov, V. D. Khramtsov, O. M. Pitirimov, and A. G. Shchurik, “Properties of high-porosity metals,” Powder Metall. Met. Ceram., 19, No. 12, 822–826 (1980).10.1007/BF00790995 ↗
43. V. N. Antsiferov and V. D. Khramtsov, “Production and properties of high-porous permeable cellular materials and alloys,” Perspekt. Mater., No. 5, 56–60 (2000).
44. V. V. Savich, “Porous materials from spongy titanium powder—technology, properties, and application,” in: Proc. Int. Sci. Conf. S. T. Kishkin’s Scientific Ideas and Modern Materials Science [in Russian] (April 25–26, 2006), Vseros. Inst. Aviat. Mater., Moscow (2006), pp. 323–329.
45. V. V. Savich, A. I. Bobrovskaya, A. M. Taraikovich, and S. A. Bedenko, “Micro- and nanostructured surface of spongy titanium powder particles and its effect on properties of associated porous materials,” in: Proc. Inst. Sci. Conf. Nanotechnologies of Functional Materials [in Russian] (June 27–29, 2012), Izd. Politekh. Inst., Saint Petersburg (2012), pp. 523–529.
46. O. V. Roman, Y. Y. Boiko, V. G. Gorobtsov, and V. I. Schelegov, “Hydrodynamic compaction of filters from titanium powders,” in: Proc. 5th Int. Conf. Titanium, Science and Technology (September 10–14, 1984), Munich, Germany (1984), Vol. 1, pp. 333–337.
47. O. P. Reut, L. S. Boginskii, and E. E. Petyushik, Dry Isostatic Pressing of Compactable Materials [in Russian], Debor, Minsk (1998), p. 258.
48. V. V. Savich, L. P. Pilinevich, and M. V. Tumilovich, “Comparison of porous materials properties made from sponge titanium powders produced by different methods,” in: Proc. 2004 Powder Metallurgy World Congress & Exhibition (October 17–21, 2004), Vienna, Austria (2004), Vol. 4, pp. 152–157.
49. K. E. Belyavin, V. V. Mazyuk, D. V. Min’ko, and V. K. Sheleg, Theory and Practice of Field-Assisted Sintering of Porous Powder Materials [in Russian], Remiko, Minsk (1997), p. 180.
50. V. V. Savich, “Porous and composite materials based on titanium powders: production and basic properties,” in: Powder Metallurgy (Collected Scientific Papers) [in Russian], Issue 31, 214–238 (2008).
51. K. S. Weil, E. A. Nyberg, and K. L. Simmons, “Use of a naphthalene-based binder in injection molding net-shape titanium components of controlled porosity,” Mater. Trans., 46, No. 7, 1525–1531 (2005).10.2320/matertrans.46.1525 ↗
52. Se-Won Yook, Byung-Ho Yoon, Hyoun-Ee Kim, et al., “Porous titanium (Ti) scaffolds by freezing TiH2-camphene slurries,” Mater. Lett., 62, 4506–4508 (2008).10.1016/j.matlet.2008.08.010 ↗
53. B. Neirinck, O. Van der Biest, and J. Vieugels, “Slip casting of titanium and titanium hydride stabilized emulsions for the production of porous bulk titanium,” in: Proc. EuroPM 2009 Powder Metallurgy Congress & Exhibition (October 12–14, 2009), Copenhagen (2009), Vol. 2, pp. 305–310.
54. N. K. Tolochko, A. S. Artushkevich, V. V. Savich, et al., “Dental implants fabricated by selective laser processing of titanium powders,” in: Science for Materials in the Frontier Centuries: Advantages and Challenges (November 4–8, 2002), Kyiv (2002), pp. 343–344.
55. N. K. Tolochko, T. Laoui, L. Froyen, et al., “Dental root implants produced by the combined selective laser sintering/melting of titanium powders,” Proc. Inst. Mech. Eng., Part L: J. Mat. Des. Appl., 216, No. 4, 267–270 (2002).10.1243/0954407021529101 ↗
56. K. E. Belyavin, D. V. Min’ko, Yu. A. Chivel’, and V. K. Pavlenko, “Unit for powder laser stereolithography and its applications,” in: Powder Metallurgy (Collected Scientific Papers) [in Russian], Issue 30, 35–43 (2007).
57. M. Bram, L. Zhao, H.-P. Buchkremer, and D. Stöver, “Graded hybrid membranes for microfiltration,” Mater. Forum, 29, 295–300 (2005).
58. A. P. Cysne Barbosa, M. Bram, H. P. Buchkremer, and D. Stöver, “Two-component-MIM parts with a functional gradient in porosity,” in: Proc. Int. Conf. Powder Metallurgy & Particulate Mat, ed. MPFI (May 18–21, 2011), San Francisco, California (2011), Vol. 4, pp. 157–171.
59. SIKA-R…AS Metal Membranes, www.gkn-filters.de/products_en/sika-r-as/index.html , p. 16.
60. Zi Li and D. Stoecker, Metallic Membranes: Business Briefing, CPI Technology (2003), pp. 1–3.
61. A. H. Persson, K. Brodersen, A. K. Srivastava, et al., “Fabrication and characterization of porous metal structures produced by tape casting,” in: Proc. EuroPM 2009 Powder Metallurgy Congress & Exhibition (October 12–14, 2009), Copenhagen (2009), Vol. 2, pp. 311–316.
62. A. Laptev, O. Vyal, M. Bram, et al., “Green strength of powder compacts provided for production of highly porous titanium parts,” Powder Metall., 48, No. 4, 358–364 (2005).10.1179/174329005X73838 ↗
63. V. V. Savich, L. P. Pilinevich, M. V. Tumilovich, and A. M. Taraikovich, “Strength improvement of porous materials out of sponge titanium powders,” in: Proc. PM 2010 Powder Metallurgy World Congress & Exhibition (October 10–14, 2010), Florence (2010), Vol. 4, pp. 181–186.
64. V. V. Savich, L. P. Pilinevich, and A. M. Taraikovich, “Improving the strength of porous materials from spongy titanium powder,” in: Proc. Int. Sci. Conf. New Materials and Technologies: Powder Metallurgy, Composite Materials, Protective Coatings, and Welding [in Russian] (September 29–30, 2010), Inst. Poroshk. Metall., Minsk (2010), pp. 98–100.
65. V. V. Savich, L. P. Pilinevich, V. V. Doktarau, and A. M. Taraykovich, “Parameters of sintered porous structures made from a mixture of sponge titan and aluminum powders,” in: Proc. EuroPM 2011 Powder Metallurgy Congress & Exhibition (October 10–13, 2011), Barcelona (2011), Vol. 2, pp. 361–367.
66. V. Savich, A. Taraykovich, and S. Bedenko, “Properties of porous aerators of sponge titanium powder with reinforcing additives,” in: Proc. EuroPM2012 Powder Metallurgy Congress & Exhibition (September 16–19, 2012), Basel (2012), Vol. 1, pp. 59–64.
67. M. Köhl, M. Bram, H. P. Buchkremer, and D. Stöver, “Damping properties of porous Ti-alloys made by metal injection molding,” in: Proc. 17th Plansee Seminar: Int. Conf. High Performance PM Materials (May 25–29, 2009), Reutte, Austria (2009), Vol. 3, pp. 1–12.