journal article·2007-09

Structure and properties of WC-Co alloys in solid-phase sintering. I. Geometrical evolution

A. V. Laptev

Powder Metallurgy and Metal Ceramics· Volume 46· Issue 9-10
Publisher page

Abstract

The paper examines the geometrical evolution and particulate interaction in WC-Co alloys produced by solid-phase sintering. It is shown that solid-phase sintering actively modifies the geometric structure: carbide particles grow, become facetted and grow together, and the cobalt phase is redistributed. The WC particles grow irregularly over different temperature ranges. The low rate of growth is characteristic of temperature ranges between 1050 and 1200°C. When alloys are sintered at 1200°C and higher temperatures, the growth of tungsten carbide particles intensifies substantially (by four times). Hence, the temperature 1200°C separates two structurization areas in solid-phase sintering. At this temperature, there is a bend on the specific resistivity curve, which is evidence of higher-quality grain and phase boundaries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Powder Metallurgy Techniques and Materials · Injection Molding Process and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. A. V. Laptev, “Densification of WC-Co alloys in solid-phase sintering (review),” Powder Metall. Met. Ceram., 46, No. 7–8, 317–324 (2007).10.1007/s11106-007-0051-3 ↗
2. I. N. Chaporova and K. S. Chernyavskii, Structure of Hard Sintered Alloys [in Russian], Metallurgy, Moscow (1975), p. 248.
3. I. N. Chaporova, T. B. Gorbachova, V. A. Ivensen, O. N. Eiduk, et al., “Changes in the fine structure of the WC phase in sintering of tungsten-cobalt alloys,” in: Hard Alloys and Refractory Metals (Collected Papers of Russian Research Institute of Hard Alloys) [in Russian], Issue 16, Metallurgiya, Moscow (1976), pp. 163–172.
4. S. Haglund, B. Uhrenius, and J. Agren, “Solid state sintering of WC-Co,” in: Proc. PM’94, Powder Metallurgy World Congress (June 6–9, 1994), Vol. 2, Paris (1994), pp. 1493–1496.
5. R. Porat, S. Berger, and A. Rosen, “Synthesis and processing of nanocrystalline WC-Co powders,” in: Proc. 14th Int. Plansee Seminar (May 12–16, 1997), Vol. 2, Reutte, Tirol (1997), pp. 582–595.
6. N. Tsuchiya, M. Fukuda, T. Nakai, and H. Suzuki, “Some properties of WC-Co alloy prepared by solid-phase sintering,” J. Jap. Soc. Powd. Powder. Met., 37, No. 8, 1177–1180 (1990).10.2497/jjspm.37.1177 ↗
7. A. V. Laptev, S. S. Ponomarev, and L. F. Ochkas, “Structural features and properties of alloy 84% WC-16 % Co obtained by hot pressing in the solid and liquid phases. Part 1. Effect of the temperature at which the specimens are prepared on their density and structure,” Powder Metall. Met. Ceram., 39, No. 11–12, 607–617 (2000).10.1023/A:1011388400293 ↗
8. K. S. Chernyavskii, Stereology in Physical Metallurgy [in Russian], Metallurgiya, Moscow (1977), p. 280.
9. A. V. Laptev, S. S. Ponomarev, and L. F. Ochkas, “Study of possibility of solid phase producing poreless WC-26% Co hard metal at high energy pressing,” in: Proc. EURO PM’99, Conf. on Advances in Hard Materials Production (November 8–10, 1999), Turin (1999), pp. 205–212.
10. S. Haglund, J. Agren, and B. Uhrenius, “Solid state sintering of cemented carbides — an experimental study,” Z. Metallk., 89, No. 5, 316–322 (1998).
11. O. Lavergne, F. Hodaj, and C. H. Allibert, “Solid state dissolution behavior of WC in Co binder,” in: Proc. Euro PM’96, Stockholm (1986), pp. 153–158.
12. A. Davin, V. Leroy, D. Coutsouradis, and L. Habraken, Rev. Metall., 60, 275 (1963).
13. A. V. Laptev, S. S. Ponomarev, and L. F. Ochkas, “Structural features and properties of alloy 84% WC-16 % Co obtained by hot pressing in the solid and liquid phases. Part 2. Influence of the temperature at which the specimens are made on their physicomechanical properties,” Powder Metall. Met. Ceram., 40, No. 1–2, 77–83 (2001).10.1023/A:1011368124481 ↗
14. A. V. Laptev, S. S. Ponomarev, and L. F. Ochkas, “Solid phase consolidation fine grained WC-16 wt.% Co hard metals,” J. Advan. Mat., 33, No. 3, 42–51 (2001).
15. M. Yu. Bal’shin, Scientific Basis of Powder Metallurgy and Fiber Metallurgy [in Russian], Metallurgiya, Moscow (1972), p. 336.
16. O. V. Roman, V. V. Skoroknod, and G. R. Fridman, Ultrasonic and Resistor Inspection in Metallurgy [in Russian], Vyssh. Shkola, Minsk (1989), p. 182.