journal article·2008-11

Molybdenum-based oxidation-resistant MoSi2–Al2O3 and WSi2–Al2O3 coatings

V. I. Zmii, A. P. Patokin, V. L. Khrebtov, B. M. Shirokov

Powder Metallurgy and Metal Ceramics· Volume 47· Issue 11-12
Publisher page

Abstract

Various studies and comparative tests are conducted on oxidation-resistant unmodified and modified MoSi2–Al2O3 and WSi2–Al2O3 silicide coatings in air at 1800 and 1900°C. Metallographic, x-ray diffraction, electron microprobe, and chemical analyses show that the introduction of alumina into molybdenum and tungsten disilicides improves their hardness and produces fine-grained silicides with high corrosion resistance. The composition with fine alumina particles (O < 0.1 μm) with the total alumina concentration from 3 to 15 wt.% in the coating is most favorable for improving the oxidation resistance of disilicides. It is shown that the high oxidation resistance of MoSi2–Al2O3 and WSi2–Al2O3 coatings is due to the presence of alumina in disilicides, which contributes to the formation of an external high-temperature oxide layer. This layer consists of α-Al2O3 and a mullite sublayer in which Al2O3 crystals are introduced into SiO2.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Semiconductor materials and interfaces · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. A. V. Byalobzhevskii, M. S. Tsirlin, and B. I. Krasilov, High-Temperature Corrosion and Protection of Superrefractory Metals [in Russian], Atomizdat, Moscow (1977), p. 224.
2. E. P. Nechiporenko, A. P. Petrichenko, and Yu. B. Pavlenko, Corrosion Protection of Metals [in Russian], Vyshcha Shkola, Kiev (1985), p. 112.
3. Yu. V. Dzyadykevich, “Protective coatings on niobium, tantalum, molybdenum, and tungsten for increased resistance to high-temperature oxidation,” Powder Metall. Met. Ceram., 31, No. 4, 313–3172 (1992).10.1007/BF00796281 ↗
4. V. I. Zmii, “Production of diffusion silicide coatings with the required composition,” Powder Metall. Met. Ceram., 34, No. 11–12, 647–649 (1996).10.1007/BF00559495 ↗
5. V. I. Zmii, N. V. Kovtun, P. I. Glushko, and S. G. Ruden’kii, “Stability and heat resistance of silicide coatings on refractory metals. Part 2. Stability and heat resistance of silicide coatings on tungsten and molybdenum at 1500–2000°C,” Powder Metall. Met. Ceram., 42, No. 1–2, 50–53 (2003).10.1023/A:1023995000098 ↗
6. A. P. Patokin, V. L. Khrebtov, and B. M. Shirokov, “Production of composite materials by hydrogen reduction of metal chlorides,” Vopr. Atomn. Nauki Tekhn., Ser. Fiz. Radiats. Povrezhd. Radiats. Materialoved., 1(67), 2(68)
7. T. N. Nazarchuk and O. I. Popova, Complexometric Analysis of Ceramic–Metal and Ceramic Materials and Some Alloys [in Russian], Naukova Dumka, Kiev (1965), p. 51.
8. G. I. Postogvard, G. Yu. Parkhomenko, and A. E. Makarenko, “Rapid complexometric measurement of molybdenum and aluminum in the Mo–Al–O system,” in: Physical and Chemical Methods for Analysis of Metals and Alloys [in Russian], Izd. Kharkov. Fiz.-Tekhn. Inst. AN USSR, Kharkov (1976), pp. 34–35.
9. G. I. Postogvard and A. E. Makarenko, “Gravimetric method to measure silicon in molybdenum and tungsten silicides produced by the diffusion method,” in: Physical and Chemical Methods for Analysis of Metals and Alloys [in Russian], Izd. Kharkov. Fiz.-Tekhn. Inst. AN USSR, Kharkov (1976), pp. 40–41.
10. G. Hass and R. E. Thun (eds.), Physics of Thin Films, Vol. 3, Academic, New York (1966).
11. A. A. Appen, Temperature-Stable Inorganic Coatings [in Russian], Khimiya, Leningrad (1976), p. 296.
12. E. P. Nechiporenko, Yu. F, Khrinkov, A. V. Durakov, et al., “Thermal stresses in the metal–silicide coating system,” Fiz. Khim. Obrab. Mater., No. 4, 80–83 (1977).
13. N. S. Poltavtsev, A. P. Patokin, and E. N. Pryanchikov, “X-ray analysis of the structural characteristics of lowest silicides of Mo and Wo,” in: Proc. 5th All-Union Meeting on High-Temperature Oxidation-Resistant Coatings (May 12–16, 1970, Kharkov), Nauka, Leningrad (1972), pp. 343–347.