Electric-discharge sintering of TiN-AlN nanocomposites
Source abstract
Abstract
The structurization and properties of TiN-AlN and TiN-AlN-Y2O3 nanocomposites consolidated by electric-discharge sintering are examined. TiN-AlN composites with a relative density of about 98 to 99% are produced. Their structure is not homogenous and consists of TiN and AlN grains of about 200 nm in size. There are also large spherical grains of titanium nitride of 2 to 10 µm. This effect is probably caused by microdischarges between particles of the conducting phase and subsequent meltback of the interacting surfaces. The effect of yttrium oxide additives on the material structure and properties is investigated. It is shown that TiN-AlN composites consolidated by electric-discharge sintering have high hardness (HV ∼ 25 GPa) and fracture toughness (K1c ∼ 6 MPa · m1/2).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. V. G. Kolesnichenko, O. B. Zgalat-Lozynskyy, T. F. Lobunets, et al., “Structure investigation of nano TiN under nonisothermal sintering,” Students’ Meeting School of Ceramics (May 2003, Novi Sad): Book of Extended Abstracts, Novi Sad (2003), pp. 42–43.
2. P. A. Vityaz’, V. M. Kaptsevich, and K. É Belyavin, Status and Development of Powder Material Sintering by Electric Current [in Russian], Minsk (1987), p. 35.
3. J. Han Won and K. Hun Kim, “Sintering of attrition-milled TiN powders using a spark plasma sintering technique,” J. Ceramic Processing Research, 3, No. 3, 166–170 (2002).
4. P. Angerer, L. G. Yu, K. A. Khor, et al., “Spark-plasma sintering (SPS) of nanostructured titanium carbonitride powders,” J. Europ. Ceram. Soc., 25, No. 11, 1919–1927 (2005).10.1016/j.jeurceramsoc.2004.06.008 ↗
5. S. A. Balankin, N. P. Stepanov, and A. V. Khriplo, Powder Compaction by Direct Electric Heating — A Promising Method of Powder Metallurgy [in Russian], Elektronika, Moscow (1986), p. 26.
6. A. I. Raichenko, Fundamentals of Powder Sintering by Electric Current [in Russian], Metallurgiya, Moscow (1987).
7. A. I. Raichenko, T. I. Istomina, and I. A. Troyan, “Powder sintering with application of an electric current and periodic mechanical pulses,” Powder Metall. Met. Ceram., 39, No. 3-4, 198–201 (2000).10.1007/BF02678644 ↗
8. O. I. Raychenko, V. P. Popov, and O. V. Derev’yanko, “Peculiarities of phase creating in the Ag-Fe-graphite compositions during processing by electric current,” in: Int. Conf. Fluid Flow Phenomena in Metals Processing (March 14–18, 2004, Charlotte, North Carolina, USA), Charlotte (2004), pp. 138–143.
9. A. I. Raichenko, V. P. Popov, and A. V. Derevyanko, “Alloy formation in a heterogeneous system under the action of an electric current,” Powder Metall. Met. Ceram., 42, No. 5–6, 230–234 (2003).10.1023/A:1025703209130 ↗
10. Liang Qiao, Heping Zhou, and Cuiwei Li, “Microstructure and thermal conductivity of plasma sintering AlN ceramics,” Mat. Sci. Eng., B99, 102–105 (2003).10.1016/S0921-5107(02)00429-4 ↗
11. T. V. Mosina, Production, Structure Formation, and Properties of TiN-AlN Composites for Friction Units with High Wear Resistance [in Russian], Authors’ Abstract of PhD Thesis, Kiev (2002), p. 15.
12. V. N. Eremenko, Yu. V. Naidich, and I. A. Lavrinenko, Sintering in the Presence of a Liquid Metal Phase [in Russian], Naukova Dumka, Kiev (1968), p. 123.
13. P. S. Kislyi and M. A. Kuzenkova, Sintering of Refractory Compounds [in Russian], Naukova Dumka, Kiev (1980), p. 168.
14. M. Z. Kol’chinskii and A. I. Raichenko, “A model investigation of the sintering of metal powders with intense energy release at inter-particle contacts,” Powder Metall. Met. Ceram., 16, No. 8, 585–588 (1977).10.1007/BF00790729 ↗
15. T. Ya. Kosolapova (ed.), Properties, Production, and Use of Refractory Compounds: Handbook [in Russian], Metallurgiya, Moscow (1986), p. 928.