Projection of the solidus surface of the Fe–Mo–C system in the composition range 0–40 at.% C
Source abstract
Abstract
The solidus projection of the Fe–Mo–C system in the composition range 0–40 at.% C is constructed for the first time using EDX, SEM, HT-DTA, HT-XRD, Pirani–Alterthum method, Vickers microhardness measurement, and CALPHAD modeling technique. It is established that there are M6C + (Mo2C) + (Mo), M6C + (Mo) + σ, M6C + σ + R, M6C + R + (α-Fe), M6C + (α-Fe) + (γ-Fe), M6C + (γ-Fe) + (Mo2C), and (γ-Fe) + (Mo2C) + Fe2MoC three-phase equilibria on the solidus surface, whose temperatures are decreasing from 1484 to 1100°C. It is shown that M6C carbon intermetallide is a linear phase in terms of carbon on the solidus surface with the homogeneity range Fe38.2–45.3Mo47.5–40.4C14.3 for metal components, within which the lattice parameters change from 1.1152(3) to 1.1072(8) nm. CALPHAD modeling shows that, besides the above-mentioned equilibria on the solidus surface, there are three-phase equilibria with participation of orthorhombic stabilized (Fe3C) cementite and monoclinic Fe2MoC molybdenum cementite: (γ-Fe) + (Fe3C) + C, (γ-Fe) + (Fe3C) + Fe2MoC, (Fe3C) + Fe2MoC + C, and Fe2MoC + (Mo2C) + C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Metal Alloys Wear and Properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (9)
Show source-provided references
1. J.-O. Andersson, “A thermodynamic evaluation of the Fe–Mo–C system,” Calphad, 12, No. 1, 9–23 (1988).10.1016/0364-5916(88)90025-9 ↗
2. T. Ya. Velikanova, M. A. Turchanin, T. Dobatkina, and T. A. Velikanova, “Carbon-Iron-Molybdenum,” in: Landolt-Börnstein, Numerical Data and Functional Relationships in Science and Technology, W. Martinsen (ed.), New Series. Group IV: Physical Chemistry, by G. Effenberg and S. Ilyenko (eds.), Ternary Alloy Systems, Phase Diagrams, Crystallographic and Thermodynamic Data Critically Evaluated by MSIT, Vol. 11D2, Springer-Verlag, Berlin, Heidelberg (2008), pp. 124–172.
3. M. Pirani and H. Alterthum, “Uber eine Methode für Schmelzpunktbestimmung an Hochschmelzenden Metallen,” Z. Elektrochem., 29, No. 1–2, 5–8 (1923).
4. Yu. A. Kocherzhinskii, E. A. Shishkin, and V. I. Vasilenko, “Differential thermal analyzer with a thermocouple sensor to 2200°C,” in: Phase Diagrams for Metal Systems [in Russian], Nauka, Moscow (1971), pp. 245–249.
5. T. Nishizawa, “Thermodynamic study of the Fe–Mo–C system,” Scand. J. Metall., 1, 41–48 (1972).
6. B. Uhrenius and H. Harvig, “Thermodynamic evaluation of carbide solubilities in the Fe-Mo-C, Fe-W-C and Fe-Mo-W-C systems at 1000°C,” Met. Sci., 9, No. 2, 67–82 (1975).10.1179/030634575790444379 ↗
7. H. Wada, “Thermodynamics of the Fe–Mo–C system at 985 K,” Metall. Mater. Trans A, 17A, No. 7–12, 391–398 (1986).10.1007/BF02643945 ↗
8. C. Chatfield and M. Hillert, “A thermodynamic analysis of the Fe–Mo–C system between 973 and 1273 K,” Calphad, 1, No. 3, 201–223 (1977).10.1016/0364-5916(77)90001-3 ↗
9. T. A. Velikanova, M. V. Karpets, P. G. Agraval, and M. A. Turchanin, “Phase states of Fe–Mo–C spinning alloys at high temperatures,” Powder Metall. Met. Ceram., 49, No. 9–10, 606–615 (2010).