journal article·2004-03

Effect of Molybdenum Additions on Compaction during Sintering of Fine-Grained Iron-Copper Pseudoalloys

Petr Ya. Radchenko, Olga G. Radchenko, Valentina V. Panichkina, Valerii V. Skorokhod

Powder Metallurgy and Metal Ceramics· Volume 43· Issue 3-4
Publisher page

Abstract

The effect of added molybdenum powder on compaction and the properties of sintered fine-grained iron-copper pseudoalloys is studied. The original powder mixtures are prepared by mechanical alloying, and the original powder particle size in mixtures does not exceed 0.5 μm. Specimens are sintered in the range 600-1130°C. It is shown that addition of molybdenum powder to the original charge accelerates compaction of fine pseudoalloys in both the solid phase and liquid-phase sintering compared with compaction of the same pseudoalloys without adding molybdenum. After solid-phase sintering the maximum relative density of specimens is 98.8%, and after liquid-phase sintering it is 99.3%. The main reasons for acceleration of compaction are prolonged retention of a fine-grained structure of sintered specimens up to the melting temperature for the phase based on copper and mutual diffusion between iron and molybdenum; to a significant extent the latter occurs during specimen heating in the solid phase.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Metal Alloys Wear and Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (7)

Show source-provided references
1. V. V. Panichkina and N. I. Filippov, "The influence of small diffusion flows on the microstructure transformation in fine-grained W - Cu and Fe - Cu pseudoalloys," Functional Materials, No. 2, 274–278 (1999).
2. P. Ya. Radchenko, V. V. Panichkina, O. G. Radchenko, and V. V. Skorokhod, "Compaction during sintering of fine-grained iron-copper pseudoalloys," Poroshk. Metall., Nos. 1-2, 22–28 (2000).10.1007/BF02677435 ↗
3. O. G. Radchenko, O. I. Get'man, P. Ya. Radchenko, and V. V. Panichkina, "Nature of change in the microstructure and properties during heat treatment of fine-grained Fe - Cu composites," Poroshk. Metall., Nos. 5-6, 13–20 (2000).
4. O. G. Radchenko, P. Ya. Radchenko, V. V. Panichkina, and Yu. N. Podrezov, "Mechanical properties of finegrained iron-copper pseudoalloys," Proc. 37th Int. Seminar "Urgent problems of strength," Kiev (2001).
5. R. Zimmerman and K. Gunter, Metallurgy and Materials Science [Russian translation], Metallurgiya, Moscow (1982).
6. I. N. Bogachev, V. P. Vyatkin, and V. A. Strizhak, "Study of the hot-shortness of iron-copper alloys," Izv. Vyssh. Uchebn. Zaved., Metallurgiya, No. 8, 103–106 (1977).
7. T. H. Courtney, "Densification and structural development in liquid phase sintering," Metall. Trans., 15A, No. 6, 1065–1074 (1984).10.1007/BF02644699 ↗