Functional Graded Materials Based on ZrO2 and Al2O3. Production Methods
Source abstract
Abstract
The various methods for producing functional graded materials based on ZrO2 and Al2O3 are reviewed: dry pressing followed by thermal treatment, diffusion welding, co-extrusion, chemical infiltration, electrophoretic deposition, centrifugal deposition, sedimentation, tape casting, slip casting, direct ceramic ink-jet printing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrophoretic Deposition in Materials Science · Material Properties and Applications · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. M. M. Gasik, K. R. Lilius, N. Sherradi, et al., “Production of functional graded materials by powder metallurgy methods,” Evropeiskii proekt COST-503, Problemy SÉM, No. 1, 61–66 (1996).
2. S. Moore and G. Samadani, “New materials set endurance records,” Chem. Eng. USA, 100, No. 5, 39, 41, 43 (1993).
3. “Joint research project for function graded materials,” Techno Jap., 25, No. 7, 74 (1992).
4. “Production of inclined function graded materials by slip casting,” Techno Jap., 25, No. 7, 74 (1992).
5. I. Sinokhara, “Composite materials of the system metal - oxide,” Kinzoku - - Metals and Technol., 63, No. 1, 72–77 (1993).
6. F. Deuerler, J. Petersein, J. Willbrand, and W. Schlump, “Vacuum-plasma spraying,” Techn. Mitt. Krupp, No. 2, 69–74 (1992).
7. H. Kung, R. G. Castro, A. H. Bartlett, and J. J. Petrovic, “The structure of plasma sprayed MoSi2 - Al2O3 microlaminates tubes,” Scr. Met. Mater., 32, No. 2, 179–183 (1995).10.1016/S0956-716X(99)80033-8 ↗
8. M. J. Pindera, J. Aboudi, and S. M. Arnold, “Thermomechanical analysis of functionally graded thermal barrier coatings with different microstructural scales,” J. Amer. Ceram. Soc., 81, No. 6, 1525–1536 (1998).10.1111/j.1151-2916.1998.tb02512.x ↗
9. M. Kawamura and Y. Matsuzaki, “Development of thermally protective functionally graded materials,” Netsu Shori = J. Jap. Soc. Heat Treat., 35, No. 2, 8–9 (1995).
10. N. Cherradi, D. Delfosse, B. Ilschner, and A. Kawasaki, “Materiaux a gradient: explotation du concept et techniques de production par metallurgie des poudres,” Rev. Met. (Fr.), 93, No. 2, 185–196 (1996)
11. J. G. Yeo, Y. G. Jung, and S. C. Choi, “Designing and microstructure of ZrO2/SUS316 functionally graded materials by tape casting,” Mater. Lett., 37, No. 6, 304–311 (1998).10.1016/S0167-577X(98)00111-6 ↗
12. Y. G. Jung and S. C. Choi, “Fabrication of 3Y-TZP/SUS304 functionally graded materials by slip casting: application of porous alumina moulds,” Mater. Lett., 37, No. 6, 312–319 (1998).10.1016/S0167-577X(98)00112-8 ↗
13. S. Sampath, R. Gansert, and H. Herman, “Plasma-spray forming mechanics and layered composites,” JOM: J. Miner., Metals and Mater. Soc., 47, No. 10, 30–33 (1995).10.1007/BF03221281 ↗
14. U. Balachandran, J. T. Dusek, M. S. Kleetisch, et al., Functionally Graded Material for Membrane Reactors to Obtain the Products of Reworked Gaseous Methane,” Pat. 5573737 USA, Publ. November 12 (1996).
15. L. I. Trusov and A. A. Svittzov, “Inorganic membranes based on plastic ceramics. Technological principles and practical applications,” Vseros. Nauch. Konf. “Membrany-98,” Moscow, October 5–10 (1998), p. 43.
16. “Functionally graded materials,” Atoms Jap., 39, No. 9 (1995).
17. A. S. Khandaz, Electrolyte of the System Zirconium Oxide - Bismuth Oxide with a Graded Composition,” Pat. 5171645 USA, Publ. December 15 (1991).
18. Kh. Térada, “State and trends in the field of mechanics of materials,” J. Jap. Soc. Mech. Eng., 96, No. 894, 406–407 (1993).
19. J. She, S. Scheppokat, R. Janssen, and N. Claussen, “Reaction-bonded three-layer alumina-based composites with improved damage resistance,” J. Amer. Ceram. Soc., 81, No. 5, 1374–1376 (1998).10.1111/j.1151-2916.1998.tb02495.x ↗
20. Y. Haijiang, G. Yihong, W. Julin, and L. Kaiming, “The preparation of laminated ceramic composites by sedimentation and sieving,” J. Mat. Sci., 34, No. 12, 2855–2857 (1999).10.1023/A:1004631317746 ↗
21. N. Takayuki and W. Fumihitro, “Fabrication of zirconia-alumina functionally gradient materials by superplastic diffusion bonding,” J. Mat. Sci., 28, 5793–5799 (1993).10.1007/BF00365183 ↗
22. A. M. Wotton and M. H. Lewis, “Fabrication of di-phasic micro-laminar materials by co-extrusion,” Sixth Conference and Exhibition of the European Ceramic Society (Bringhton, June 20–24, 1999), Bringhton (1999), Vol. 2, p. 405.
23. B. R. Marple and D. J. Green, “Graded compositions and microstructure by infiltration processing,” J. Mat. Sci., 28, No. 17, 4637–4643 (1993).10.1007/BF00414252 ↗
24. P. Sarkar, X. Haung, and P. S. Nicholson, “Electrophoretic deposition and its use to synthesize YSZ/Al2O3 macro-laminate ceramic/ceramic composites,” Ceram. Eng. Sci. Proc., 14, Nos. 9/10, 707–716 (1993).10.1002/9780470314234.ch3 ↗
25. F. Harbach and H. Nienburg, “Homogeneous functional ceramic components through electrophoretic deposition from stable colloidal suspensions. I.Basic concepts and application to zirconia,” J. Eur. Ceram. Soc., 18, 675–683 (1998).10.1016/S0955-2219(97)00197-0 ↗
26. B. Ferrari, A. J. Sanchez-Herencia, and R. Moreno, “Electrophoretic forming of Al2O3/Y-TZP layered ceramics from aqueous suspensions,” Mat. Res. Bul., 33, No. 3, 487–499 (1998).10.1016/S0025-5408(97)00244-4 ↗
27. B. Ferrari, A. J. Sanchez-Herencia, and R. Moreno, “Aqueous electrophoretic deposition of Al2O3/Y-TZP layered ceramics,” Mat. Let., 35, 370–374 (1998).10.1016/S0167-577X(97)00280-2 ↗
28. C. Zhao, J. Vleugels, L. Vandeperre, and O. Van Der Biest, “Cylindrical Al2O3/Ce-TZP functionally graded materials by electrophoretic deposition,” Sixth Conference and Exhibition of the European Ceramic Society (Bringhton, June 20–24, 1999), Bringhton (1999), Vol. 2, pp. 403–404.
29. C. Zhao, L. Vandeperre, J. Vleugels, and O. Van Der Biest, “Microwave sintering of ZrO2-based functionally graded composites,” Sixth Conference and Exhibition of the European Ceramic Society (Bringhton, June 20–24, 1999), Bringhton (1999), Vol. 2, pp. 241–242.
30. T. Moritz, G. Werner, G. Tomandl, et al., “Sintering of thin ceramic layers with a graded pore structure,” Sixth Conference and Exhibition of the European Ceramic Society (Bringhton, June 20–24, 1999), Bringhton (1999), Vol. 2, pp. 245–246.
31. T. Chartier, D. Merle, and J. L. Besson, “Laminar ceramic composites,” J. Eur. Ceram. Soc., 13, 101–107 (1995).10.1016/0955-2219(95)93055-8 ↗
32. T. Chartier and T. Rouxel, “Tape-cast alumina-zirconia laminates: processing and mechanical properties,” J. Eur. Ceram. Soc., 15, 299–308 (1997).10.1016/S0955-2219(96)00131-8 ↗
33. K. F. Plucknett, C. H. Caseres, C. Hugnes, and D. S. Wilkinson, “Processing of tape-cast laminates prepared from fine alumina/zirconia powders,” J. Amer. Ceram. Soc., 77, No. 8, 2145–2153 (1994).10.1111/j.1151-2916.1994.tb07110.x ↗
34. Z. C. Peter, J. G. David, and L. Gary, “Constrained densification of alumina/zirconia hybrid laminates. I. Experimental observations of processing defects,” J. Amer. Ceram. Soc., 80, No. 8, 1929–1939 (1997).10.1111/j.1151-2916.1997.tb03075.x ↗
35. J. Requena, R. Moreno, and J. S. Moya, “Alumina and alumina/zirconia multilayer composites obtained by slip casting,” J. Amer. Ceram. Soc., 72, No. 8, 1511–1513 (1989).10.1111/j.1151-2916.1989.tb07692.x ↗
36. A. J. Sanchez-Herencia, J. S. Moya, and P. T. Antoni, “Microstructural design in alumina - alumina - zirconia layered composites,” Scr. Mater., 38, No. 1, 1–5 (1998).10.1016/S1359-6462(97)00443-0 ↗
37. R. Zenati, Y. Jorand, C. Olagnon, and G. Fantozzi, “Ce-TZP based multilayer composites,” Silicat. Ind., 64, No. 3/4, 41–46 (1999).
38. B. R. Marple and J. Boulanger, “Graded casting of materials wit continuous gradients,” J. Amer. Ceram. Soc., 77, No. 10, 2747–2750 (1994).10.1111/j.1151-2916.1994.tb04670.x ↗
39. A. V. Shevchenko, “Technology for the formation of graded oxide composites,” Poroshk. Metall., Nos. 3–4, 24–32 (1999).10.1007/BF02676038 ↗
40. A. V. Shevchenko, A. K. Ruban, E. V. Dudnik, and L. M. Lopato, “Slip casting of multilayer materials from nanocrystalline powders in the system ZrO2 - Y2O3 - CeO2 - Al2O3,” Proc. Int. Conf. on Deformation and Fracture in Structural PM Materials, DFPM'99 (Piesvtany, 1999), Piesvtany (1999), Vol. 2, p. 169–172.
41. A. V. Shevchenko, A. K. Ruban, E. V. Dudnik, et al., “Formation of self-reinforced gradient ceramic composites,” Funct. Mater., 8, No. 1, 67–70 (2001).
42. A. V. Shevchenko, A. K. Ruban, and E. V. Dudnik, “High-technology ceramics based on zirconium dioxide,” Ogneupory, No. 9, 2–8 (2000).
43. M. J. Edirisinghe, “Solid freeform fabrication methods for engineering ceramics,” Br. Ceram. Trans., 97, No. 6, 283–286 (1998).
44. W. D. Teng and M. J. Edirisinghe, “Development of ceramic inks for jet printing: effect of conductivity,” Euro Ceramics V. Pt. 1 Trans. Tech. Publications, D. Bortzmeyer, M. Boussuge, Th. Chartier, et al. (eds.), Switzerland (1997), pp. 337–340.10.4028/www.scientific.net/KEM.132-136.337 ↗
45. W. D. Teng, M. J. Edirisinghe, and J. R. G. Evans, “Optimization of dispersion and viscosity of a ceramic jet printing ink,” J. Amer. Ceram. Soc., 80, 929–934 (1997).
46. W. D. Teng and M. J. Edirisinghe, “Development of ceramic inks for direct continuous jet printing,” J. Amer. Ceram. Soc., 81, 1033–1036 (1998).10.1111/j.1151-2916.1998.tb02443.x ↗
47. G. Wang and V. D. Kristic, “Rapid prototyping of ceramic components.Review,” Can. Ceram., 67, No. 3, 52–58 (1998).