Effect of sintering temperature on the microstructure and mechanical properties of Ti(C, N)-based cermets
Source abstract
Abstract
Ti(C, N)-based cermets are produced by vacuum sintering at 1420, 1430, and 1440°C. The effect of sintering temperature on the microstructure and properties of Ti(C, N)-based cermets is studied. The microstructure and fracture morphology are investigated with a scanning electron microscope; mechanical properties such as transverse rupture strength and hardness are measured. The results show that, with increasing sintering temperature, the microstructure of cermets became uniform, and the rim phase structure is gradually completed. When the sintering temperature reaches 1440 °C, the rim phase becomes thicker and more brittle, grains start growing, and the mechanical properties decrease, indicating that a sintering temperature of 1440°C is too high.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. D. Moskowitz and L. L. Terner, “TiN improves properties of titanium carbonitride-base materials,” Int. J. Refr. Met. Hard Mater., 5, 13 (1986).
2. P. Ettmayer, H. Kolaska, W. Lengauer, et al., “Ti(C, N) cermets: metallurgy and properties,” Int. J. Refr. Met. Hard Mater., 13, 343–351.10.1016/0263-4368(95)00027-G ↗
3. H. Matsubara, “Application of hard and ultra-hard materials,” J. Jpn. Inst. Metals, 29, No. 12, 1008–1018 (1990).10.2320/materia1962.29.1008 ↗
4. W. J. Liu, Y. Zheng, and W. H. Xiong, “Effects of adding nano-structured powers on the microstructures and mechanical properties of Ti (C, N)-based cermets,” Powder Metall. Tech., 23, No. 5, 334–338 (2005).
5. Y. Zheng, W. J. Liu, Q. Yuan, et al., “Effect of grain growth inhibitor on the microstructure and mechanical properties of Ti(C, N)-based cermet,” Key Eng. Mater., 280–283, 1413–1416 (2005).
6. M. Alvarez and J. M. Sánchez, “Spark plasma sintering of Ti(C, N) cermets with intermetallic binder phases,” Int. J. Refr. Met. Hard Mater., 25, No. 1, 107–118 (2007).10.1016/j.ijrmhm.2006.03.004 ↗
7. X. J. Ni, L. H. Qi, W. Wang, et al., “Study of Ti(C, N)-based cermets fabricated by pressureless-HIP sintering,” Key Eng. Mater., 280–283, 1417–1420 (2005).
8. H. Yoshimura, T. Sugizawa, K. Nishigaki, et al., “Reaction occurring during sintering and the characteristics of TiC-20TiN-15WC-10TaC-9Mo-5.5Ni-11Co cermet,” Int. J. Refr. Hard Mater., 33, 170–174 (1983).
9. P. Lindahl, P. Gustafson, U. Rolander, et al., “Microstructure of model cermets with high Mo or W content,” Int. J. Refr. Hard Mater., 17, 411–421 (1999).10.1016/S0263-4368(99)00032-3 ↗
10. W. H. Xiong, Z. H. Hu, and K. Cui, “Transitional layer of phase interfaces in Ti(C, N)-based cermet,” Acta Metall. Sinica, 32, No. 10, 1075–1080 (1996).
11. D. C. Yao, Powder Metallurgy Experiment Technology [in Chinese], Metallurgical Industry Press, Beijing (1990).