journal article·2013-01

Production of Titanium Powder Sheets by Asymmetric Rolling

K. A. Gogaev, V. S. Voropaev, G. Ya. Kalutskii, Yu. N. Podrezov, D. G. Verbilo, O. S. Koryak

Powder Metallurgy and Metal Ceramics· Volume 51· Issue 9-10
Publisher page

Abstract

The influence of symmetric and asymmetric rolling on the formation and properties of titanium powder rolled sheets is studied. It is established that the asymmetric rolling of powder metal produces sheets with higher density and much better mechanical properties than symmetric rolling does. The effect of the titanium powder rolling conditions on the structure of the material before and after sintering is studied. The rolled metal obtained by asymmetric rolling has best mechanical properties at a sintering temperature lower by 200°C than that of symmetric rolling. The technological feasibility of asymmetric rolling of titanium powder is demonstrated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Engineering Technology and Methodologies · Powder Metallurgy Techniques and Materials · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. V. M. Segal, “Materials processing by simple shear,” Mat. Sci. Eng. A, 197, 157–164 (2002).10.1016/0921-5093(95)09705-8 ↗
2. Y. Beygelzimmer, and V. Varyukhin, and D. Orlov, “On ultrafine grained materials: Properties and structure,” in: Proc. 2nd Int. Symp., Los Alamos National Laboratory Edition, Los Alamos (2002), pp. 234–238.
3. E. G. Pashinskii, Physics and Mechanics of Structure Refinement during Combined Plastic Deformation [in Russian], Veber, Donetsk (2009), p. 352.
4. Yu. N. Podrezov, N. D. Rudik, V. I. Danilenko, et al., “Hardness of deformed titanium produced using different deformation processes,” Fiz. Tekhn. Vys. Davl., 20, No. 4, 101–110 (2009).
5. Ya. E. Beygelzimmer, O. V. Mikhailov, A. S. Synkov, et al., “Twist extrusion of powdered metal. I. Finiteelement analysis,” Fiz. Tekhn. Vys. Davl., 18, No. 1, 69–81 (2008).
6. Ya. E. Beygelzimmer, O. V. Mikhailov, A. S. Synkov, and M. B. Shtern, “Twist extrusion of powdered metal. II. Experiment and discussion of the results,” Fiz. Tekhn. Vys. Davl., 18, No. 3, 92–96 (2008).
7. Ya. E. Beygelzimmer, M. B. Shtern, T. A. Epifantseva, and A. S. Synkov, “Production of green heterogeneous composite materials by twist extrusion,” Fiz. Tekhn. Vys. Davl., 19, No. 3, 120–124 (2009).
8. V. N. Vydrin, V. Ya. Gol’dshtein, L. M. Ageev, et al., “Structural and textural changes in Kh18N10T stainless steel after rolling–drawing,” Fiz. Metal. Metalloved., 41, No. 3, 46–64 (1976).
9. K. A. Gogaev, V. S. Voropaev, Yu. N. Podrezov, et al., “Asymmetric rolling for hardening of compact and porous titanium,” in: Abstracts of Conf. on High-Pressure Physics and Engineering (Sudak, September 21–24, 2006) [in Russian], Kiev (2006), p. 72.
10. K. A. Gogaev, G. Ya. Kalutskii, and V. S. Voropaev, “Asymmetric rolling of metal powders. I. Compactibility of metal powders in asymmetric rolling,” Powder Metall. Met. Ceram., 48, No. 3–4, 152–156 (2009).10.1007/s11106-009-9116-9 ↗
11. K. A. Gogaev, G. Ya. Kalutskii, and V. S. Voropaev, “Asymmetric rolling of metal powders. II. Angular parameters of asymmetric rolling,” Powder Metall. Met. Ceram., 48, No. 5–6, 274–278 (2009).10.1007/s11106-009-9135-6 ↗
12. K. A. Gogaev, G. Ya. Kalutskii, and V. S. Voropaev, “Asymmetric rolling of metal powders. III. Forward slip in asymmetric rolling of metal powders,” Powder Metall. Met. Ceram., 48, No. 7–8, 384–387 (2009).10.1007/s11106-009-9153-4 ↗
13. G. A. Vinogradov and V. P. Katashinskii, Theory of Sheet Rolling of Metal Powders and Granules [in Russian], Metallurgiya, Moscow (1979), p. 224.
14. K. A. Gogaev, V. A. Nazarenko, and V. A. Voropaev, “Mechanical properties of powder titanium at different production stages. V. Properties of a titanium strip produced by powder rolling,” Powder Metall. Met. Ceram., 48, No. 11–12, 652–658 (2009).10.1007/s11106-010-9182-z ↗
15. E. M. Borisovskaya, V. A. Nazarenko, Yu. M. Podrezov, et al., “Mechanical properties of powder titanium at different production stages. II. Mechanical behavior of porous titanium compacts,” Powder Metall. Met. Ceram., 47, No. 9–10, 538–545 (2008).10.1007/s11106-008-9056-9 ↗
16. Yu. N. Podrezov, V. A. Nazarenko, A. V. Vdovichenko, et al., “Mechanical properties of powder titanium at different production stages. III. Contact formation in powder titanium based on examination of mechanical properties in sintering,” Powder Metall. Met. Ceram., 48, No. 3–4, 201–210 (2009).10.1007/s11106-009-9111-1 ↗
17. Yu. N. Podrezov, V. A. Nazarenko, A. V. Laptev, et al., “Mechanical properties of powder titanium at different production stages. IV. Mechanical properties and contact formation in powder titanium produced by dynamic hot pressing,” Powder Metall. Met. Ceram., 48, No. 5–6, 295–301 (2009).10.1007/s11106-009-9130-y ↗