journal article·2017-01

Effect of Molybdenum Additions on the Structurization of Fe–Mo Alloys and Contact Interaction in the TiB2–(Fe–Mo) Systems

M. S. Storozhenko

Powder Metallurgy and Metal Ceramics· Volume 55· Issue 9-10
Publisher page

Abstract

The structurization of Fe–Mo alloys at 5–30 wt.% Mo is studied and contact interaction of these alloys with titanium diboride is examined. The Fe–5 wt.% Mo and Fe–9 wt.% Mo alloys consist of an α-Fe metallic structure with inclusions of Fe2Mo intermetallics. The Fe–13% Mo alloy based on the α-Fe solid solution contains individual inclusions of Fe3Mo2 intermetallics. When Mo content of the alloys increases to 17–30 wt.%, Fe2Mo and Fe3Mo2 intermetallics form intensively and make the alloy brittle. Zero contact angles are observed for the (Fe–13 wt.% Mo) and (Fe–17 wt.% Mo) alloys. The TiB2–(Fe–13 wt.% Mo) system is characterized by chemical interaction leading to additional molybdenum, iron, and titanium boride phases. The TiB2–(Fe–13 wt.% Mo) system shows no brittle intermetallic phases. The contact interaction in the TiB2–(Fe–17 wt.% Mo) system leads to the intensive formation of complex molybdenum–iron–titanium borides; there is also a great number of Fe3Mo2 intermetallics. The TiB2–(Fe–13 wt.% Mo) system is promising for the development of new composite materials and coatings with high wear resistance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. V. N. Antsiferov, L. D. Sirotenko, A. M. Khanov, and I. V. Yakovlev, Composite Materials and Structures Based on Titanium and Its Compounds [in Russian], Izd. Inst. Gidrodin. SO RAN, Novosibirsk (2001), p. 370.
2. T. M. Evtushok, O. N. Grigoriev, A. D. Kostenko, et al., “Tribological properties of composite materials based on refractory titanium compounds,” Powder Metall. Met. Ceram., 44, No. 7–8, 353–357 (2005).10.1007/s11106-005-0102-6 ↗
3. O. Umanskyi, O. Poliarus, M. Ukrainets, and I. Martsenyuk, “Effect of ZrB2, CrB2, and TiB2 additieves on the tribological characteristics of NiAl-based gas-thermal coatings,” Key Eng. Mater., 604, 20–23 (2014).10.4028/www.scientific.net/KEM.604.20 ↗
4. G. V. Samsonov and I. M. Vinnitskii, Refractory Compounds [in Russian], Metallurgiya, Moscow (1976), p. 557.
5. I. M. Spiridonova, A. D. Panasyuk, E. V. Sukhovaya, and A. P. Umanskii, Stability of Composite Materials [in Russian], Svidler A. L., Dnepropetrovsk (2011), p. 244.
6. A. D. Panasyuk, V. S. Fomenko, and G. G. Glebova, Stability of Nonmetallic Materials in Melts [in Russian], Naukova Dumka, Kyiv (1986), p. 352.
7. J. Kubarsepp, H. Klaasen, and J. Pirso, “Behavior of TiC-base cermets in different wear conditions,” Wear, No. 249 (3–4), 229–234 (2001).10.1016/S0043-1648(01)00569-5 ↗
8. A. P. Umanskii, V. P. Konoval, A. D. Panasyuk, et al., “Plasma coatings of TiCrC–FeCr composite powder alloys: structure and properties,” Powder Metall. Met. Ceram., 46, No. 3–4, 133–138 (2007).10.1007/s11106-007-0022-8 ↗
9. A. Panasyuk, O. Umanskyi, M. Storozhenko, and V. Akopyan, “Development of TiB2–based cermets with Fe–Mo binder,” Key Eng. Mater., 527, 9–13 (2013).10.4028/www.scientific.net/KEM.527.9 ↗
10. A. P. Umanskii, M. S. Storozhenko, and V. V. Akopyan, “Study of contact interaction between TiB2 and Fe–Mo alloys,” Adgez. Raspl. Paika Mater., No. 44, 38–45 (2011).
11. O. A. Bannykh, N. P. Lyakishev, and L. L. Rokhlin, Phase Diagrams of Binary Metal Systems: Handbook [in Russian], in 3 Vols., Mashinostroenie, Moscow (1996), Vol. 2, p. 992.