Preparation of Al2O3–Ni Cermet Composites by Aqueous Gelcasting
Source abstract
Abstract
The main objective of producing ceramic-metal composites is to improve the fracture toughness of the brittle ceramic matrix. Classical methods of powder metallurgy (such as isostatic or uniaxial pressing) are not capable of fabricating complex-shape elements. For this reason, colloidal processes have been applied recently in manufacturing of ceramic matrix composites. In the present work, Al2O3–3 vol.% Ni composites were prepared by aqueous gelcasting process and sintering in reducing atmosphere. The commercially available monomers 2-hydroxyethyl acrylate and N,N′-methylenebisacrylamide as cross-linking agents were used. The activator was N,N,N′,N′,-tetramethylenediamine (TEMED) and ammonium persulfate was added as an initiator of the polymerization process. Composite slurries were obtained from alumina powders (grain size 0.21 μm) and 3% (in respect to the total solid volume) of two nickel powders of different grain size (~10 and ~0.4 μm). The paper describes the rheological properties of the obtained composite slurries. The properties of green and sintered elements have also been presented. It was found that the presence of nickel particles had a significant influence on the slurry polymerization process. The green and sintered relative density was in every case higher than 57 and 97%, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Injection Molding Process and Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. K. Konopka, M. Maj, and K. J. Kurzydlowski, “Studies of the effect of metal particles on the fracture toughness of ceramic matrix composites,” Mater. Charact., 51, 335–340 (2003).10.1016/j.matchar.2004.02.002 ↗
2. J. S. Moya, S. Lopez-Esteban, and C. Pecharroman, “The challenge of ceramic/metal microcomposites and nanocomposites,” Prog. Mater. Sci., 52, 1017–1090 (2007).10.1016/j.pmatsci.2006.09.003 ↗
3. K. Konopka and A. Ozieblo, “Microstructure and the fracture toughness of the Al2O3–Fe composites,” Mater. Charact., 46, 125–129 (2001).10.1016/S1044-5803(01)00113-9 ↗
4. D. T. Ellerby and R. E. Loehman, “Al2O3–Ni composites with high strength and fracture toughness,” J. Am. Ceram. Soc., 83, 1279–1280 (2000).10.1111/j.1151-2916.2000.tb01368.x ↗
5. O. O. Omatete, M. A. Janney, and S. D. Nunn, “Gelcasting: from laboratory development toward industrial production,” J. Eur. Ceram. Soc., 17, 407–413 (1997).10.1016/S0955-2219(96)00147-1 ↗
6. P. Bednarek et al., J. Eur. Ceram. Soc., 30, 1795–1801 (2010).10.1016/j.jeurceramsoc.2010.01.036 ↗
7. M. Haij et al., “Gelcasting of Al2O3/Ag nanocomposite using water-soluble solid-salt precursor,” Ceram. Int., 38, 867–870 (2012).10.1016/j.ceramint.2011.06.062 ↗
8. J. Stampfl et al., “Rapid prototyping and manufacturing by gelcasting of metallic and ceramic slurries,” Mater. Sci. Eng., A334, 187–192 (2002).10.1016/S0921-5093(01)01800-7 ↗
9. J. Yang, J. Yu, and Y. Huang, “Recent developments in gelcasting of ceramics,” J. Eur. Ceram. Soc., 31, 2569–2591 (2011).10.1016/j.jeurceramsoc.2010.12.035 ↗
10. J. R. Capua Proveti and G. Michot, “The Brazilian test: a tool for measuring the toughness of a material and its brittle to ductile transition,” Int. J. Fract., 139, 455–60 (2006).10.1007/s10704-006-0067-6 ↗